SUPPLIER: VELA ARREDAMENTI
TYPE: FURNITURE
OTHER SUPPLIERS
A wide range of product from near to 3,000 suppliers around the world.
Other Products From This Supplier
A wide range of product from furniture to finishes to meet the desire of all designers.
Recently Viewed Products
A wide range of product from furniture to finishes to meet the desire of all designers.
Hand shower
duravit > Shower
MinusFlow, Spray mode: SoftRain, Rain, IntenseRain, Dimensions of water supply connection: 1/2", Spray mode selection: Rotating blasting disc, Flow rate (3 bar): 9 l/min, Silicone nubs
Nublo 46231
moduleo > Floor plank
A versatile tile with the calm appearance and soft colour nuances of travertine, a luxurious natural stone. A tile that matches almost any interior.
Hanami Ceiling/wall
slamp > Ceiling lamp
The above information, also provided in the Technical Data Sheet, refers to electrical standards with a voltage of 120-220V. The electrical installation components and other accessories may vary depending on the regulations of different countries; please contact us for more information. The wattage of the light bulbs is suggested for an optimal balance between luminous output and product aesthetics and should not be considered as the maximum power that can be installed on the product. Where explicitly recommended, please follow the indicated bulb size and/or diameter. Lamps marked as dimmable are intended to be so only if the electrical system has been prepared for such light variation. This is different for floor lamps and battery-powered lamps marked as dimmable, as their dimmer is integrated.
Contago White Long Media Console
lexington > Console
Modern designs from quartered white oak in a Nordic white finish, featuring zinc-clad inserts natureform casted from pieces of slate. Each cabinet will vary in appearance from piece to piece as per their organic nature and castings. The 6 doors with touch hardware open to reveal two adjustable shelves behind each pair of doors. Featuring a recessed plinth base.
coral fr Coral Classic FR mouse grey
forbo > Carpet
Entrance flooring that stops dirt and moisture being tracked into carriages, on the soles of shoes and wheel treads, is fundamental to modern rail vehicle design. An effective entrance system reduces premature wear and tear to interior floor coverings, minimises cleaning and maintenance costs and protects passengers by reducing slip hazards.
LOT RGB - LED aluminium pendant lamp _ Artemide
Artemide > Ceiling lamp
The LoT RGB is an elegant aluminum LED pendant lamp, available in the LoT Reflector variant, designed to deliver dynamic lighting experiences with its RGBW quad-chip LEDs, offering soft color washes and adjustable white light beams ranging from 8 to 60 degrees. Crafted with precision optics and an aluminum heat sink, this indoor lamp features a sleek plastic cover and delivers a maximum peak power of 80W (60W continuous), with a luminous output of 1100lm/3800lm, a CCT of 2700K, and a high CRI of 90. The lamp is equipped with intuitive software that allows users to effortlessly control light behavior, including beam intensity, color tonality, movement, and speed, without requiring prior programming skills. Additionally, the 3D file of the product is available for download, enabling seamless integration into design projects. Artemide, the supplier, is a globally acclaimed Italian design company founded in 1960, celebrated for its innovative lighting solutions and timeless designs that blend functionality with aesthetic excellence.
TROPICALIA - Polymer cord woven chair with armrests _ Moroso
Moroso > Chair
The Tropicalia chair features a tubular stainless steel or powder-coated steel frame, designed for outdoor use with PVC glides, and is adorned with a polymer cord woven intricately around the frame. This design transforms the chair into a versatile piece, offering different aesthetic personalities depending on the material used—playful with multi-colored threads, sophisticated in a single hue, or elegant in leather (note: natural and artificial leather versions are not suitable for outdoor use). A 3D file of the Tropicalia chair is available for download, allowing for detailed visualization and planning. Manufactured by Moroso, a prestigious Italian design company founded in 1952, the Tropicalia chair is a testament to Moroso's commitment to innovative, high-quality furniture that blends artistry with functionality, making it a favorite among luxury residential and commercial projects worldwide.
BELT CORD OUTDOOR - Rope garden armchair with armrests _ Minotti
minotti > Armchair
The Belt Cord Outdoor is a stylish and versatile garden armchair crafted from durable rope and fabric, featuring armrests and designed for both comfort and elegance. Inspired by the indoor Belt seating collection introduced in 2021, this outdoor version retains its enveloping silhouette, now accentuated by a corded contour in Sand and Dark Brown tones, complementing the sleek Bronze metal frame. The chair rests on a matte varnished aluminum base in Ecru and Dark Brown shades, echoing the cord's color palette, and includes padded cushions with high-resilience polyurethane foam, covered in water-repellent fabric for added durability. The Belt Cord Outdoor collection offers a variety of pieces, including a two-seater sofa, bergère, armchair, ottoman, lounge, and dining armchairs, with the option of natural teak legs for a warmer, classic aesthetic that seamlessly integrates with other outdoor furnishings. A 3D file of the product is available for download, allowing for detailed visualization and planning. Minotti, a prestigious Italian design house established in 1948, is celebrated for its luxurious, contemporary furniture and accessories, blending timeless craftsmanship with modern elegance.
WEDGE - Rectangular glass table _ Minotti
minotti > Table
The Wedge table captivates with its bold, sculptural design, where the solid semi-circular legs contrast strikingly with the delicate, oblique chisel-tip feet, creating an illusion of weightlessness as the tabletop appears to float effortlessly. This gravity-defying aesthetic is further enhanced in the barrel-shaped glass top version, which reveals the irregularly arranged semi-circular supports beneath, adding an element of surprise. Available in three distinct top shapes—round, rectangular, or barrel-shaped with gently curved edges—the table offers a choice of materials, including bronzed glass, Moka-colored ash wood, or marble in Calacatta, Stone Grey, and Nero Marquina finishes. The bases, crafted in Malt-colored satin metal or polished steel (a nod to 1970s design), can be paired with marble or wood tops, while the Moka-colored wenge wood base is exclusively paired with the bronzed glass top. Wedge, with its strong graphic style, is available in both dining and coffee table versions, making it a versatile centerpiece for any space. A 3D file of the product is available for download, allowing for detailed visualization and planning. Minotti, a prestigious Italian design house established in 1948 by Alberto Minotti, is celebrated for its luxurious, contemporary furniture and accessories, blending timeless elegance with meticulous craftsmanship. With a global presence in cities like Milan, New York, and Shanghai, Minotti continues to set the standard for high-end interior design.
ANDERSEN SLIM 90/ANDERSEN SLIM 90 QUILT - Sofa _ Minotti
minotti > Sofa
The Andersen Slim collection embodies a harmonious blend of visual lightness and comfort, featuring freely arranged cushions that create an artful, yet tailored, sense of disorder. Its timeless design is accentuated by the Andersen foot, a true designer piece crafted from Peltro-colored die-cast metal with an anti-touch, extra-glossy finish, a signature shade developed by Minotti Studio. The sophisticated design showcases fine proportions, intricate spokes, and elegant tapers, reflecting the meticulous craftsmanship and innovative spirit of Minotti, a globally acclaimed Italian luxury furniture brand founded in 1948, renowned for its contemporary, minimalist designs and premium craftsmanship. The collection, including Andersen Slim 90 and Andersen Slim 90 Quilt, is complemented by the Andersen Line, offering a balance of lightness and solidity, designed to enhance comfort, privacy, and the essence of home. A 3D file of the product is available for download, allowing for a detailed preview of its elegant design.
IMAX ADJUSTABLE - Recessed LED square spotlight _ Deltalight
Deltalight > Ceiling lamp
The iMax® is a highly adaptable accent lighting solution designed to highlight individual objects or architectural features with precision, thanks to its tilt mechanism that allows for precise beam alignment up to 30°, ensuring the light is directed exactly where needed. To minimize its visual impact on ceilings, it can be installed flush using an optional mounting kit. The product is available in multiple variants, each featuring advanced LED technology with high CRI (>90) and a range of color temperatures (2700K-1800K or 3000K), offering outputs from 201lm to 2101lm depending on the model. Additionally, a downloadable 3D file of the product is available for detailed planning and integration into design projects. Deltalight, the supplier, is a globally recognized leader in high-end lighting solutions, founded in 1987 and headquartered in Belgium, renowned for its innovative designs and premium-quality materials that cater to both residential and commercial projects worldwide.
CAMPUS - Low square coffee table _ Natuzzi Italia
Natuzzi Italia > Coffee table
The Campus low square table, designed by Mauro Lipparini for Natuzzi Italia, features a polished champagne metal base with tobacco ash wood accents and a top crafted from green Calacatta marble, blending timeless elegance with modern sophistication. Part of the Campus collection, this table showcases soft, harmonious lines and a refined aesthetic, with its laser-cut steel sheet legs, nickel-coated finish, and liquid paint adding a touch of contemporary flair. The table is available in various top materials, including brushed tobacco elm wood, rear-lacquered Stopsol glass, and Calacatta marble, all treated with water-repellent paint for durability. A 3D file of the product is available for download, allowing for detailed visualization and planning. Natuzzi Italia, a globally renowned Italian brand founded in 1959, is celebrated for its premium, luxury furniture and accessories, combining exquisite craftsmanship with a blend of classic and contemporary design. Explore their offerings at [https://www.natuzzi.it](https://www.natuzzi.it).
HYANNIS PORT - Bedside table with drawers _ Ligne Roset
Ligne Roset > Side table
The Hyannis Port is a sleek, rectangular lacquered plywood bedside table featuring drawers, part of a collection that exudes a refined 'cabinet-made' aesthetic. The pieces are characterized by their multi-ply frames finished in a glossy white lacquer, with distinctive rounded rear corners, brilliant-chromed handles, and sturdy metal underframes. The drawers are equipped with controlled automatic closing runners for smooth operation. For those interested in digital customization or prototyping, a 3D file of the product is available for download. This exquisite piece is brought to you by Ligne Roset, a prestigious French furniture manufacturer established in 1860, renowned for its modern and contemporary designs that blend functionality with striking aesthetics. Ligne Roset's global presence and commitment to quality craftsmanship make it a leader in high-end interior design solutions.
FLOU - Motif rectangular velvet cushion _ Ligne Roset
Ligne Roset > Furniture accessories
The Flou cushion is a luxurious rectangular velvet cushion featuring digitally printed motifs, available in two elegant color variants, crafted with a 100% cotton velvet cover and filled with 100% polyester fiber for a plush feel. A 3D file of the product is available for download, allowing for a detailed preview of its design. Produced by Ligne Roset, a renowned French furniture manufacturer established in 1860, the brand is celebrated for its modern, high-quality designs that blend functionality with striking aesthetics, offering a wide range of customizable furniture and home accessories for both residential and commercial spaces.
X-STEEL 316 - External control _ newform
newform > Tap
The **X-Steel 67671EX** is an external control designed for concealed diverter and stop valves, offering versatile configurations for various plumbing setups. It features options for 1-way, 3-way, 4-way, and 5-way outputs, catering to different applications such as concealed stop valves (3/4” connections with adapters to 1/2”) and concealed diverters (with or without stop functionality) for use with single-lever shower mixers or thermostatic mixers. Crafted from **X-STEEL 316**, a premium stainless steel material, this product is celebrated for its durability, eco-compatibility, and hygienic properties, making it a reliable choice for modern bathroom systems. A 3D file of the product is available for download, allowing for precise planning and integration into design projects. **Newform**, the supplier, is a renowned Italian interior design brand established in 1983, specializing in innovative and stylish bathroom and kitchen fixtures that combine functionality with aesthetic appeal, catering to both residential and commercial spaces worldwide.
GROHTHERM SMARTCONTROL - Thermostatic shower mixer with plate _ Grohe
Grohe > Tap
**Product Description:** The **Grohtherm SmartControl** is a sophisticated 2-way thermostatic mixer designed for seamless integration and intuitive operation. It features an external part for a built-in body, compatible with the **GROHE Rapido SmartBox (Art. 35 600/35 604)**, and utilizes the **GROHE FastFixation** installation system for quick and secure setup. User control is simplified with the **SmartControl button**, allowing you to start/stop water flow and adjust it from **EcoJoy limited mode to full flow**, with interchangeable symbols for customization. The mixer includes the **GROHE TurboStat thermostatic element** for precise temperature regulation, a **knurled ProGrip surface** for easy handling, and **GROHE SafeStop** with a graduated knob and safety lock at 38°C (optional **SafeStop Plus** limits temperatures to 43°C or 46°C). Additional features include **stop gaskets, filters**, and the ability to activate both outlets simultaneously. The sleek **white glass surface** adds a modern touch, while the **pre-assembly-free design** ensures flexibility. Flow rates: **Outlet B = 24 L/min, Outlet C = 26 L/min, Combined B + C = 29 L/min**. A **3D file of the product is available for download**, facilitating precise planning and installation. **Supplier Description:** **GROHE**, a globally renowned brand founded in 1936, specializes in premium bathroom and kitchen fittings, combining innovation, durability, and elegant design. For more details, visit the manufacturer’s page: [GROHTHERM SMARTCONTROL | Metal Shower Mixer Grohe](https://www.grohe.it).
GLAUKO - Rectangular wool rug with geometric shapes _ LELIEVRE
LELIEVRE > Carpet
**Glauko** is a luxurious rectangular rug crafted from 90% wool and 10% cotton, blending durability with a soft, natural texture. This striking design is part of *Finis Terrae*, the debut collaboration between acclaimed young architect Marco Lavit and **Lelièvre Paris**—a prestigious supplier of high-end interior fabrics and furnishings since 1914. Inspired by the mystical landscapes of ancient Mani, a Greek peninsula steeped in mythology, the collection features three captivating designs—Glauko, Purro, and Xantho—each evoking a journey through geography and imagination. Glauko’s tonal geometric patterns create a harmonious rhythm, while the interplay of vibrant colors in Purro and Xantho adds dynamic contrast. A 3D file of the rug is available for download, allowing designers to visualize it in their spaces. The collection redefines boundaries, merging art and craftsmanship to transform interiors into realms of wonder.
STRADA II - T2971 - Floor mounted ceramic bidet with overflow _ Ideal Standard
Ideal Standard > Toilet seat
Here’s a refined and expanded product description, including a concise supplier overview and mention of the 3D file availability: *"This floor-mounted ceramic bidet features a practical overflow function, combining durability with elegant design for enhanced bathroom functionality. The 3D file of the product is available for download, facilitating seamless integration into your project plans. Manufactured by Ideal Standard, a renowned bathroom solutions provider with over a century of expertise, the bidet reflects the brand’s commitment to quality, innovation, and timeless aesthetics."*
ALLURE NOCE BRUN - Porcelain stoneware wall/floor tiles with wood effect _ Italgraniti
Italgraniti > Wall tile-stone-brick
DWELL WALL - White-paste wall tiles with resin effect _ Atlas Concorde
Atlas Concorde > Wall tile-stone-brick
CLUNY - BOURGOGNE - Porcelain stoneware wall/floor tiles with stone effect _ COTTO D'ESTE
Cotto d'Este > Wall tile-stone-brick
VICTORIAN - Rectangular Vitreous China washbasin with towel rail _ bathroom brands
bathroom brands > Washbasin
DISTORTION A - Porcelain stoneware wall/floor tiles _ gruppo bardelli
gruppo bardelli > Wall tile-stone-brick
Products From the Same Collection
A wide range of product from furniture to finishes to meet the desire of all designers.
Recommended Products
A wide range of product from furniture to finishes to meet the desire of all designers.
Fiber Soft Armchair Tube Base
muuto > Chair
A sculptural yet distinctly ergonomic seat makes the Fiber Soft Armchair ideal anywhere we spend an extended time seated. Its interior shell made of 100 % recycled plastic is clad with soft wadding and upholstery to elevate a supreme sense of ease and embrace. The spacious, ultra soft seat and smooth curves of Fiber Soft Armchair provide maximum comfort in public spaces and the home alike.
Fiber Soft Armchair Wood Base
muuto > Chair
A sculptural yet distinctly ergonomic seat makes the Fiber Soft Armchair ideal anywhere we spend an extended time seated. Its interior shell made of 100 % recycled plastic is clad with soft wadding and upholstery to elevate a supreme sense of ease and embrace. The spacious, ultra soft seat and smooth curves of Fiber Soft Armchair provide maximum comfort in public spaces and the home alike.
Oslo Lounge Chair Swivel Base
muuto > Chair
Marrying its compact design with comfort and elegance, the Oslo Lounge Chair offers an inviting and dynamic seat with a classic yet distinctly modern expression. A low and deep shell is elevated by an embracing back that envelopes and supports. The combination of sculptural qualities and a distinctly functional design makes it an ideal piece for the contemporary home and public spaces alike. The Swivel base adds a classic and dynamic feel to the chair as it facilitates flexibility and movement while seated.
Fiber Conference Armchair Swivel Base
muuto > Chair
A sculptural yet distinctly ergonomic seat makes the Fiber Conference Armchair ideal anywhere we spend an extended time seated. Its interior shell is made using 100% recycled plastic, while its spacious seat and embracing curves are fully upholstered with a soft fixed cushion, providing maximum comfort in public spaces and the home alike.
Cover Armchair
muuto > Chair
Referencing the values of honest craftsmanship and Scandinavian materiality, the Cover Armchair is an elegant perspective on the timeless wooden armchair. With its curved backrest and folded armrest covers, the Cover Armchair explores the possibilities of wooden veneer, paired with a deep comfort, modern expression and base in solid wood. Echoing the seamless appearance of the chair, it features no visible screws for a simple touch. Use the Cover Armchair in the living room, hallway or bedroom of the home as well as in restaurants, canteens, educational institutions, workplaces and more. The Cover Series without upholstery is EU Ecolabel Certified. By carrying the EU Ecolabel Certification, the product is guaranteed to have a reduced environmental impact throughout the total lifecycle of the product from raw material to disposal.
Loft Chair
muuto > Chair
Loft Chair exemplifies honest, simple design thanks to an expression inspired by industrial design. The design features contrasting materials with its frame in powder coated steel that is offset by the soft plywood on seat and back, molded to embrace the user's body.
Fiber Armchair Tube Base
muuto > Chair
The Fiber Chair brings a new perspective to the iconic shell chair through its innovative composite of 100% recycled plastic and wood fibers. The wood fibers blend into the surface for a matte finish, adding a soft, inviting touch. The Fiber Chair is designed with friendly, embracing curves that provide extensive comfort to its user while taking up little space in the room.
Workshop Chair
muuto > Chair
The Workshop Chair brings a playful approach to the wooden chair. The design creates a new perspective on archetypical Scandinavian design through its thin back shell and slightly curved seat that gives the chair its distinct look.
Fiber Armchair Sled Base
muuto > Chair
The Fiber Chair brings a new perspective to the iconic shell chair through its innovative composite of 100% recycled plastic and wood fibers. The wood fibers blend into the surface for a matte finish, adding a soft, inviting touch. The Fiber Chair is designed with friendly, embracing curves that provide extensive comfort to its user while taking up little space in the room.
Fiber Side Chair Sled Base
muuto > Chair
The Fiber Chair brings a new perspective to the iconic shell chair through its innovative composite of 100% recycled plastic and wood fibers. The wood fibers blend into the surface for a matte finish, adding a soft, inviting touch. The Fiber Chair is designed with friendly, embracing curves that provide extensive comfort to its user while taking up little space in the room.
Linear Steel Armchair
muuto > Chair
The Linear Steel Armchair is designed with clean, elegant lines and subtle details for a modern expression. Uniting invitingly organic shapes with extensive comfort and long-lasting qualities, the Linear Steel Armchair is an outdoor chair without any compromises. It is defined by its contrasts; the clean lines of its seat and front legs in combination with the ergonomic, smoothly curved backrest for an enveloping comfort. The Linear Steel Armchair is rationally designed in the way in which its seat is part of the apron, making for less material use in the production phase while making for a strong, durable design. Linear Steel Armchair stacks up to 5 chairs on the floor.
Gyon
leolux > Chair
Designer Christian Werner has stripped the dining chair back to the basics. The result is Gyon, a design built entirely on basic shapes. Werner has created a stunningly elegant chair that doesn't compromise on comfort.
Tamarinde
leolux > Chair
Tamarinde is a slender dining chair with invitingly open arms and an adjustable back, so you can easily relax after dessert. With Tamarinde, a good conversation can go on for hours after an amazing meal.
Be bop
kartell > Chair
A chair that combines several expressions in a single vocabulary, tracing the lines of the most traditional carved African stools and merging them with the American design of the golden years, echoing the concept of curved multilayer plywood.
Ero|s|
kartell > Chair
Ero|S| is a swivel armchair with an organic egg shape, a refined combination of finishes and an adept use of colour. Ero|S| is ideal for the home, in dining or living rooms, but it also fits nicely into offices as a representative chair in the meeting room or in waiting areas. Two versions are available: the chair can rest on a glossy aluminium rotating base with central support or on a lightweight four-legged chrome structure.
Comback (2 chairs)
kartell > Chair
Comback is a chair featuring a backrest consisting of seven "teeth" which spread out towards the lumbar region where they meet a reinforced hexagonal rim with slim shafts radiating down to join the seat. A goodly size, this single mould chair embodies functionality and well-freighted ergonomics with sentiment and memories. The Comback comes in several modernised versions – the “swivel” model with four spokes and a central swivel shaft and the “sled” with two slim tubular sides.
UPON - Stackable wood veneer chair _ Zilio A&C
Zilio A&C > Chair
Upon Chair by Zilio A&C – A Minimalist and Ingenious Stacking Chair for Versatile Spaces A Pure, Expressive Design with a Hidden Innovation Designed by Sylvain Willenz for Zilio A&C, the Upon Chair is a study in understated elegance and intelligent engineering. What makes Upon truly unique is its seamless backrest connection—as if by magic, the form-pressed veneer backrest sits on the contrasting metal frame with no visible fixings, thanks to a hidden internal joint. This precision-engineered detail not only enhances the chair’s aesthetic purity but also ensures it is lightweight, strong, and stackable, making it ideal for both commercial and residential interiors. Versatile for Home, Hospitality & Office Settings With its clean lines, refined proportions, and practical stackability, Upon adapts effortlessly to a variety of spaces: Cafés & Restaurants – A stylish, durable chair that allows for easy stacking and storage. Workspaces & Offices – A minimal yet comfortable seating solution for meeting rooms and collaborative spaces. Modern Dining Rooms – A sculptural, contemporary chair that complements Scandinavian and Japandi aesthetics. Hotel & Hospitality Projects – Perfect for lobbies, conference areas, and guest spaces. The upcoming armchair version and optional upholstered seat further expand Upon’s possibilities, allowing designers to customize it for enhanced comfort and style. Materiality: A Balance of Strength & Lightness Upon is designed with a mix of materials that emphasize both functionality and refined aesthetics: Form-Pressed Veneer Backrest – Tapers to just 6mm at the edges, offering a light, floating appearance while maintaining strength. Contrasting Metal Frame – Ensures structural durability while keeping the chair light and visually effortless. Optional Upholstered Seat – Adds extra comfort, making it suitable for longer seating durations in work and hospitality environments. Dimensions & Stackability Upon’s compact yet ergonomic proportions make it a functional choice for both small and large spaces: Width: 500 mm Depth: 505 mm Height: 785 mm Its stackable design allows for efficient storage, making it an excellent solution for flexible and adaptable environments. Why Choose the Upon Chair? ✔ Innovative design – Hidden joint creates a seamless, floating backrest effect. ✔ Lightweight & stackable – Ideal for contract and hospitality use. ✔ Minimal yet strong – A refined balance of form, function, and durability. ✔ Versatile for multiple settings – From homes and cafés to offices and hotels. ✔ Optional upholstery & armchair version – Customizable for enhanced comfort. A Contemporary Seating Solution for Modern Interiors With its elegant simplicity, functional stackability, and precise craftsmanship, Upon by Zilio A&C is a timeless seating solution that brings sophistication to any setting. Whether used as a stylish dining chair, a practical workspace seat, or a sleek hospitality solution, Upon merges technical innovation with design purity. 📥 2D & 3D files available for download for seamless integration into interior projects. 🔗 Discover more at Zilio A&C. Search ChatGPT can make mistakes. Check important info.
UPON - Stackable wood veneer chair with integrated cushion _ Zilio A&C
Zilio A&C > Chair
Upon Chair by Zilio A&C – A Minimalist and Ingenious Stacking Chair for Versatile Spaces A Pure, Expressive Design with a Hidden Innovation Designed by Sylvain Willenz for Zilio A&C, the Upon Chair is a study in understated elegance and intelligent engineering. What makes Upon truly unique is its seamless backrest connection—as if by magic, the form-pressed veneer backrest sits on the contrasting metal frame with no visible fixings, thanks to a hidden internal joint. This precision-engineered detail not only enhances the chair’s aesthetic purity but also ensures it is lightweight, strong, and stackable, making it ideal for both commercial and residential interiors. Versatile for Home, Hospitality & Office Settings With its clean lines, refined proportions, and practical stackability, Upon adapts effortlessly to a variety of spaces: Cafés & Restaurants – A stylish, durable chair that allows for easy stacking and storage. Workspaces & Offices – A minimal yet comfortable seating solution for meeting rooms and collaborative spaces. Modern Dining Rooms – A sculptural, contemporary chair that complements Scandinavian and Japandi aesthetics. Hotel & Hospitality Projects – Perfect for lobbies, conference areas, and guest spaces. The upcoming armchair version and optional upholstered seat further expand Upon’s possibilities, allowing designers to customize it for enhanced comfort and style. Materiality: A Balance of Strength & Lightness Upon is designed with a mix of materials that emphasize both functionality and refined aesthetics: Form-Pressed Veneer Backrest – Tapers to just 6mm at the edges, offering a light, floating appearance while maintaining strength. Contrasting Metal Frame – Ensures structural durability while keeping the chair light and visually effortless. Optional Upholstered Seat – Adds extra comfort, making it suitable for longer seating durations in work and hospitality environments. Dimensions & Stackability Upon’s compact yet ergonomic proportions make it a functional choice for both small and large spaces: Width: 500 mm Depth: 505 mm Height: 785 mm Its stackable design allows for efficient storage, making it an excellent solution for flexible and adaptable environments. Why Choose the Upon Chair? ✔ Innovative design – Hidden joint creates a seamless, floating backrest effect. ✔ Lightweight & stackable – Ideal for contract and hospitality use. ✔ Minimal yet strong – A refined balance of form, function, and durability. ✔ Versatile for multiple settings – From homes and cafés to offices and hotels. ✔ Optional upholstery & armchair version – Customizable for enhanced comfort. A Contemporary Seating Solution for Modern Interiors With its elegant simplicity, functional stackability, and precise craftsmanship, Upon by Zilio A&C is a timeless seating solution that brings sophistication to any setting. Whether used as a stylish dining chair, a practical workspace seat, or a sleek hospitality solution, Upon merges technical innovation with design purity. 📥 2D & 3D files available for download for seamless integration into interior projects. 🔗 Discover more at Zilio A&C. Search ChatGPT can make mistakes. Check important info.
LAB MEETING ZXLB - Height-adjustable fabric office chair with armrests with 5-Spoke base _ Inno
Inno > Chair
Lab Meeting L ZXLB – A Sleek and Functional Meeting Chair for Modern Workspaces Ergonomic Comfort Meets Contemporary Aesthetics The Lab Meeting L ZXLB is a modern, high-quality meeting chair designed to bring comfort, elegance, and flexibility to professional environments. As part of a versatile office seating collection, it blends contemporary design with ergonomic functionality, making it an excellent choice for conference rooms, co-working spaces, hospitality lounges, and private offices. With a refined yet approachable look, it elevates workplace interiors without compromising on comfort. Minimalist Design with a Professional Appeal The clean lines and balanced proportions of the Lab Meeting L ZXLB make it a seamless fit for both corporate and creative spaces. Its modern silhouette exudes sophistication, while the quilted seat upholstery adds an extra layer of elegance. The chair’s design strikes the perfect balance between professional formality and relaxed comfort, making it suitable for both formal meetings and informal collaborative sessions. With a fully upholstered seat and backrest, the chair provides excellent cushioning and support, ensuring that users stay comfortable even during extended meetings. The high-quality stitching and soft contours contribute to its inviting aesthetic, making meeting spaces feel warm and approachable rather than overly rigid or sterile. Durable Materials and Custom Finishes The chair is available in a range of high-quality fabric and leather upholstery options, allowing for complete customisation based on aesthetic preferences and functional needs. From subtle neutral tones to bold accent colours, the upholstery choices make it adaptable to different workplace environments and branding schemes. The frame and base come in various metal finishes, including matte black, metallic grey, silver aluminium, and white variants, providing flexibility in design coordination. Whether integrating into a monochrome minimalist office or a vibrant creative workspace, the chair’s customisation options ensure a perfect fit. Ergonomic Features for Comfort and Productivity The Lab Meeting L ZXLB is designed with ergonomic principles in mind, ensuring maximum comfort and support throughout the workday. The soft, padded seat is contoured to promote good posture, reducing strain on the back and shoulders. The gently curved backrest provides adequate lumbar support, making long hours of sitting more comfortable. A height-adjustable mechanism allows users to modify the seating position to match different table heights, making it adaptable to various workspace configurations. The swivel function ensures easy mobility, while the five-star base with smooth-rolling castors provides effortless movement across different floor types. This combination of features makes it an ideal chair for dynamic work environments, where users need flexibility and ease of movement. Versatile Applications Across Different Work Environments The Lab Meeting L ZXLB is a multi-purpose chair suitable for a wide range of professional settings, including: Corporate Offices and Conference Rooms For executive boardrooms, team meeting areas, and private offices, this chair adds a touch of sophistication while maintaining a comfortable and functional seating experience. Its polished design ensures that meeting spaces feel both professional and inviting. Co-Working Spaces and Startups In fast-paced, open-plan work environments, flexibility is key. The chair’s mobile base and ergonomic design make it a practical choice for co-working spaces, where users may need to switch between workstations, collaboration zones, and lounge areas. Hospitality and Public Spaces Beyond traditional office settings, this chair works well in hotel business lounges, client meeting rooms, and reception areas. Its sleek yet comfortable design allows guests to relax while maintaining an upright posture, making it perfect for areas that require both style and functionality. Educational and Training Facilities In universities, training centres, and seminar rooms, this chair’s adjustable height and swivel base ensure adaptability for different table setups, fostering a collaborative learning environment. A Part of a Thoughtfully Designed Seating Collection The Lab Meeting L ZXLB is part of a larger family of seating solutions, designed for cohesive office layouts. Various configurations, including models with different bases and armrest options, allow for a unified yet varied seating arrangement throughout a workspace. For designers looking to create aesthetic consistency across multiple areas, combining different variations of the Lab series ensures a harmonious look while addressing different functional needs. Sustainability and Longevity Beyond aesthetics and comfort, the Lab Meeting L ZXLB is built with durability and sustainability in mind. The materials used in its construction are chosen for their longevity, ensuring that the chair maintains its quality and performance over time. The metal frame and base are sturdy and wear-resistant, while the upholstery fabrics are designed to withstand daily use. Investing in high-quality office seating means fewer replacements and reduced waste, contributing to a more sustainable workplace.
LAB MEETING ZXLA - Height-adjustable fabric office chair _ Inno
Inno > Chair
Lab Meeting L ZXLA: An Ergonomic and Versatile Meeting Chair for Modern Workspaces Introduction The Lab Meeting L ZXLA is a meticulously designed meeting chair that combines ergonomic comfort with modern aesthetics, making it an ideal choice for contemporary work environments. Part of the renowned Lab product family by Inno, this chair is crafted to enhance comfort and functionality in meeting rooms, conference spaces, and multi-functional work areas. inno.fi Design and Aesthetics The Lab Meeting L ZXLA features a sleek and minimalist design characterized by clean lines and a refined silhouette. Its modern appearance is complemented by a soft quilted seat, adding a touch of sophistication while ensuring maximum comfort during extended meetings or work sessions. The chair's understated elegance allows it to integrate seamlessly into various interior design styles, from minimalist to industrial chic. Materials and Finishes Inno offers a diverse selection of materials and finishes for the Lab Meeting L ZXLA, enabling customization to suit specific aesthetic preferences and functional requirements. The upholstery options include high-quality fabrics such as Gabriel Step Melange, Fame, Crisp, and Europost 2, each available in a wide array of colors. These fabrics are known for their durability, soft texture, and vibrant hues, allowing designers to create a cohesive look that aligns with the overall interior theme. The chair's frame is available in several finishes, including: Crystal Aluminium: Offers a sleek, metallic appearance that complements modern interiors. Silver Aluminium: Provides a subtle sheen, adding a touch of elegance without overpowering the space. Metallic Grey: Introduces a contemporary and industrial feel, suitable for cutting-edge office designs. Effect White: Creates a clean and crisp look, ideal for minimalist environments. Matte White: Delivers a soft and understated finish, blending seamlessly with neutral palettes. Matte Black: Adds a bold and sophisticated touch, perfect for creating contrast in lighter settings. Effect Black: Features a textured finish that adds depth and interest to the chair's design. These finish options provide flexibility in achieving the desired aesthetic for any professional setting. Dimensions and Ergonomic Features While specific dimensions are not provided in the available information, the Lab Meeting L ZXLA is designed with ergonomics in mind. It features a 5-star cross base equipped with castors, facilitating smooth mobility across various floor surfaces. The chair also includes a height adjustment mechanism, allowing users to customize the seating position for optimal comfort and posture support during meetings or collaborative sessions. Suitable Environments The versatility and thoughtful design of the Lab Meeting L ZXLA make it suitable for a wide range of applications: Corporate Offices: Ideal for conference rooms, boardrooms, and executive offices where comfort and professionalism are paramount. Educational Institutions: Suitable for seminar rooms, lecture halls, and administrative offices, providing ergonomic support for extended periods. Hospitality Settings: Enhances guest experiences in hotel business centers, meeting rooms, and collaborative lounges. Co-Working Spaces: Fits seamlessly into modern co-working environments, offering flexibility and comfort to diverse users. Lab Product Family and Recognition The Lab Meeting L ZXLA is part of Inno's broader Lab product family, which includes a wide range of chairs, tables, and sofas designed to bring comfort and coziness into everyday working environments. This collection emphasizes versatility and cohesive design, allowing for the creation of harmonious interior landscapes. Notably, the Lab product family has been honored with the internationally recognized GOOD DESIGN™ 2015 Award, presented by The Chicago Athenaeum: Museum of Architecture and Design in collaboration with the European Centre for Architecture, Art, Design, and Urban Studies. This accolade underscores the collection's excellence in design, innovation, and functionality. Alternatives For those seeking alternative options within the Lab product family, Inno offers various configurations to suit different needs: Lab Meeting L ZXL: Similar to the L ZXLA model but without armrests, offering a more streamlined appearance. Lab Meeting L ZXC: Features a cantilever base, providing a different aesthetic and seating experience. Lab Lounge: A lower seating option with a more relaxed posture, suitable for lounge areas and informal meeting spaces. These alternatives allow for cohesive design across various areas within a workspace, maintaining a unified aesthetic while catering to different functional requirements. Conclusion The Lab Meeting L ZXLA by Inno exemplifies the fusion of modern design, ergonomic functionality, and customizable aesthetics. Its adaptability to various professional environments, coupled with the recognition from prestigious design awards, makes it a standout choice for those seeking to enhance their interiors with stylish and comfortable seating solutions.
UPHOLSTERY
A wide range of Upholstery and materials provided by our suppliers to satisfy your needs.
auckland - 7071.18
Upholstery > vescom
auckland - 7071.28
Upholstery > vescom
harding - 7070.07
Upholstery > vescom
harding - 7070.08
Upholstery > vescom
furka plus - 7064.14
Upholstery > vescom
acton - 7062.20
Upholstery > vescom
leone plus - 7054.02
Upholstery > vescom
noss - 7058.13
Upholstery > vescom
lani - 7060.49
Upholstery > vescom
wolin - 7050.32
Upholstery > vescom
wolin - 7050.35
Upholstery > vescom
hestan - 7035.11
Upholstery > vescom
hestan - 7035.22
Upholstery > vescom
cyprus - 7038.15
Upholstery > vescom
lindau - 7028.01
Upholstery > vescom
lindau - 7028.09
Upholstery > vescom
dalma - 7024.13
Upholstery > vescom
dalma - 7024.14
Upholstery > vescom
