STRIPTEC STB: Transition trims for floors with the same heights - 2d files - 3d files

PRODUCT DESCRIPTION

STRIPTEC STB: Transition trims for floors with the same heights STB profiles in brass or aluminium (available in the adhesive or perforated version) for connection or threshold cover with smooth brass and aluminium grooves. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

SUPPLIER: PROFILITEC

TYPE: ACCESSORIES

HTTPS://US.PROFILITEC.COM

[email protected]

LIST OF FILES:

Striptec ST/STB - Datasheet - Profilitec_Catalogue-page_Striptec-ST-STB_NA.pdf

OTHER SUPPLIERS

A wide range of product from near to 3,000 suppliers around the world.

Other Products From This Supplier

A wide range of product from furniture to finishes to meet the desire of all designers.

TRIMTEC TR: multipurpose profiles in different materials

profilitec > Accessories

TRIMTEC TR: multipurpose profiles in different materials TRIMTEC TR is a complete range of brass, aluminium and stainless steel trim profiles designed for fast and efficient installation of any flooring type, regardless of size and thickness. TRIMTEC TR is available in various heights from 2 to 30 mm, matching different tile thicknesses. In the aluminium and brass versions, a dovetail groove maximizes the grout grip and edge protection for both vertical and horizontal tile laying. TRIMTEC TR profiles are conceived for tile laying, but can also be used with other types of flooring such as stone, wood and industrial resin floors. TRIMTEC TR profiles are mainly used as transition trims between two types of flooring (for example between tiling and moquetteing) and as expansion joints when two lengths are laid side by side. They can also be used as trimming for ceramic skirtings and as edge protection for any floor thickness. In some cases the profiles may be used as entrance mat framing. TRIMTEC TR Curveline: the bendable version of the TR TRIMTEC TR series is also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code. TRIMTEC TR how to install 1) Choose the trim size according to the tile thickness. The trim should be 0.5+/-1mm lower than the tile, therefore not exceeding the height of the tile. 2) Apply tile adhesive. 3) Cut the profile to required length, leaving extra space for linear expansion. The perforated flange of the trim is then firmly embedded into the adhesive and aligned. 4) Trowel an additional layer of adhesive over the perforations in the profile and in the dovetail groove of the vertical section. 5) Leave a tiny gap of approximately 0.5+/-2mm between the trim and the tile for final grouting.

TRIMTEC SR Edging perimeter profiles for ceramic floors

profilitec > Accessories

TRIMTEC SR Edging perimeter profiles for ceramic floors TRIMTEC SR is especially recommended for finishing the perimeter of ceramic floors, particularly when they abut a vertical surface. It is also used as stair nosing and trimming in balconies and exit ways. TRIMTEC SR profiles have an extended vertical edge to cover and protect border surfaces and prevent future cracking. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. The aluminium section is designed with vertical dovetail anchoring. TRIMTEC SR CURVELINE: bendable profiles TRIMTEC SR series is also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code.

BORDERTEC SBR Edging profiles for balconies and patios

profilitec > Accessories

BORDERTEC SBR Edging profiles for balconies and patios The BORDERTEC BSR is recommended for contouring marble and stone balconies and sidewalks. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. BORDERTEC BSR in size BSR 20/* can be used with PROFILITEC floating floor support systems. BORDERTEC BSR contains all necessary elements for state-of-the-art installation.

ROUNDJOLLY profiles for thin floors

profilitec > Accessories

ROUNDJOLLY profiles for thin floors ROUNDJOLLY profiles join floor types of different thicknesses, finishing and protecting the tile edge. Available in aluminium and stainless steel, this profile is ideal for renovations with thin tiles.

SQUAREJOLLY SJ: square shape trims

profilitec > Accessories

SQUAREJOLLY SJ: square shape trims Squarejolly SJ is a multipurpose aluminium profile used in laying adhesive ceramic floor and wall coverings. Its uniquely symmetrical shape lends itself to endless detailing possibilities. In the technical specs, H corresponds to the tile thickness and B = H + 1mm corresponds to the visible width of the profile. In the aluminium version, a patented internal cavity with a dovetail groove maximizes vertical grout grip and edge protection. The sectional design of the SQUAREJOLLY SJ profile provides a completely leveled surface, making it resistant to vertical loads and perfectly suitable for flooring applications. How SJ models can be used SQUAREJOLLY SJ is a multipurpose profile with a wide range of applications: • Leveled flooring intersections • Decorative accent bands • Wall tile contouring • Entrance mat framing • skirting finishing and edging • Stair nosing

COVERTEC EP: Transition trims for floors with the same height

profilitec > Accessories

COVERTEC EP: Transition trims for floors with the same height The COVERTEC EP profile joins two adjacent flooring surfaces (for example: concrete/ceramic tile, wood/ceramic tile and other resin or vinyl floor combinations). The overlapping section allows differential movement of the flooring, hides edging imperfections and prevents chipping and cracking. Available in aluminium and brass with patented dovetail anchoring.

COVERTEC SP: T shape trims for floors with the same height

profilitec > Accessories

COVERTEC SP: T shape trims for floors with the same height COVERTEC SP is a profile designed to join two adjacent existing floors at the same height but it can cover imperfections in cutting or slight variations of height to be found on a tiled floor joining to a wooden one for example. Thanks to its shape, available in 3 different widths, this profile helps floor coverings to maintain the minimum distance thus acting also as a dilatation joint.

STRIPTEC ST: Transition trims for floors with different heights (max 5mm)

profilitec > Accessories

STRIPTEC ST: Transition trims for floors with different heights (max 5mm) STRIPTEC ST profiles are designed to join adjoining floors of equal or different type and thickness. The rounded shape of this profile covers edge imperfections and allows a slight rotation, compensating for elevation differences of up to 5mm. It can also be used as a termination profile, given a floor thickness of up to 5mm. Available in two versions: self-adhesive and screw-on. STRIPTEC how to install Installation of self adhesive version: 1) Make sure the base is solid, flat, level, clean and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of the pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

STRIPTEC ST38: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC ST38: Transition trims for floors with the same heights ST38 aluminium profiles (available in the adhesive or perforated version) for transition or threshold cover with knurled surface. Slightly rounded shape. The shaped edge allows perfect contact with the floor. Used to minimize installation defects and creating expansion joints.

STRIPTEC STP: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC STP: Transition trims for floors with the same heights STP Brass profiles (available in the adhesive or perforated version) for connection or threshold cover with smooth brass surface. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

STRIPTEC STB: Transition trims for floors with the same heights

profilitec > Accessories

MULTICLIP CLG Transition trims for all kind of floors

profilitec > Accessories

MULTICLIP CLG Transition trims for all kind of floors The innovative, patented MULTICLIP® CLG 370 profiles has a tilting head to adjust minor height differences up to 3mm. MULTICLIP CLG allows flooring expansion and contraction making it the perfect transition profile in between different flooring materials. You can easily increase the height by stacking up to 3 plastic rails one on top of the other. A 16mm internal cavity acts as an expansion joint, allowing 5mm of differential movement. Typically, laminate wood flooring expands about 5mm per plank due to humidity.

MULTIFIIX CLG Transitions trims for floors with the same height

profilitec > Accessories

MULTIFIIX CLG Transitions trims for floors with the same height Patented transition profile for floors at the same level, slightly rounded in anodised aluminium finish and with high resistance wood effect coating. This article has been conceived for a purely domestic environment and for Do-it-yourself use, to be fixed primarily with the nylon "MULTIFIX" plugs. MULTIFIX how to install 1. Forare con punta da 6 mm 2. Inserire gli appositi tasselli 3. Allineare i tasselli 4. Martellare in modo uniforme

MULTICOVER CLG - Transition trims for floors with the same height

profilitec > Accessories

MULTICOVER CLG - Transition trims for floors with the same height CLG transition profiles in anodised aluminium finish and with high resistance wood effect coating. The elements that make up the MULTICOVER® system fit perfectly thanks to the plastic rail and do not move once clipped together. The profiles are also available in a perforated version, for fixing with screws and plugs or self-adhesive, equipped with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective paper from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry

WOODTEC LG edging trims for wooden floors

profilitec > Accessories

WOODTEC LG edging trims for wooden floors WOODTEC LG profiles are specifically designed to join two adjoining floating wood floors. The size and shape of the profile section allows for differential movement typical of wood flooring. Its smooth top surface fits under doorways making it perfectly suitable for thresholds.

CARPETEC MG transition trims for carpet floors

profilitec > Accessories

CARPETEC MG transition trims for carpet floors Designed for carpet flooring, CARPETEC MG profiles are composed of two elements: a base track onto which the carpet is laid, and an interlocking, grooved top piece that snaps shut and compresses the carpeting.

CARPETEC MP Transition / edging trims for carpet floors

profilitec > Accessories

CARPETEC MP Transition / edging trims for carpet floors The multipurpose, grooved moquetteEC MP profiles designed to compress moquette flooring at different elevations. They may be used to join two types of moquetteing or as edge profiles.

STC Profile to cover electric cables

profilitec > Accessories

STC Profile to cover electric cables Profile used to cover electric cables. Available in the adhesive version.

CUBETEC CU: Transition trims for floors with the same height

profilitec > Accessories

CUBETEC CU: Transition trims for floors with the same height CUBETEC CU is a decorative profile that allows you to create a transition between floors of the same height or as a wall transition. The profile is characterized by the constancy of the visible dimension (8 mm) which is independent of the height of the profile. Available in polished AISI 304 stainless steel and satin steel.

CUBETEC FI: Transition trims for floors with the same height

profilitec > Accessories

CUBETEC FI: Transition trims for floors with the same height CUBETEC FI is a linear and decorative finishing element which provides long-lasting and heavy-duty tile edge protection. The CUBETEC FI profile is a decorative joint between different flooring types, trimming for ceramic tile and suitable for welcome mat framing. Two profile widths are available in polished stainless steel AISI 304.

VARIOTEC DS Transition trims to be used after flooring installation

profilitec > Accessories

VARIOTEC DS Transition trims to be used after flooring installation VARIOTEC DS is a stainless steel or brass profile for floors with differences in height from 7 to 12 mm. Supplied with adhesive on the lower side for a quick and long-lasting installation. Fitting to combine ceramic or parquet floors with lower thickness materials, such as moquettes or vinyl floors. Adhesives: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

LINETEC PR Transition trims

profilitec > Accessories

LINETEC PR Transition trims Extruded brass transition profile. Perimeter profile for wooden floors or ceramic with thickness 10 mm. They allow to solve quickly and with an excellent aesthetic result the most frequent junction situations between floors of different nature, where an appropriate connection system has not been foreseen at the time of installation.

LINETEC PQ Transition trims for floors with the same height

profilitec > Accessories

LINETEC PQ Transition trims for floors with the same height Profiles in extruded brass or stainless steel for transition between floors already installed. It fits between floors of 10 mm thick. They allow to solve quickly and with an excellent aesthetic result the most frequent transition situations between floors of different nature, where an appropriate transition system has not been foreseen at the time of installation.

LINETEC PU Transition trims for floors with the same height

profilitec > Accessories

LINETEC PU Transition trims for floors with the same height Extruded U-shaped brass profile for transition between floors already installed of 10 mm thick. It solves quickly and with an excellent aesthetic result the most frequent transition situations between floors of different nature, where an appropriate connection system has not been foreseen at the time of installation.

MULTICPLIP CLP perimetral trims that allows the flooring expansion / contraction

profilitec > Accessories

MULTICPLIP CLP perimetral trims that allows the flooring expansion / contraction The patented MULTICLIP® CLP 270 aluminium perimeter profile allows floor edge finishing without skirtings. A 16mm internal cavity allows 3/16’’ (5mm) of differential movement. This profile is also suitable along sliding door tracks and as entrance mat framing.

WOODTEC LT edging trims for wooden floors

profilitec > Accessories

WOODTEC LT edging trims for wooden floors The WOODTEC LT profiles are specifically designed for finishing the perimeter of floating wood floors, particularly when they transition to another floor type at the same elevation or abut a vertical surface. While acting as an expansion joint, they also allow floor edge finishing without skirtings. This profile is also suitable along sliding door tracks and as entrance mat framing. Installed with flathead screws.

CARPETEC MD edging tims for carpet floors

profilitec > Accessories

CARPETEC MD edging tims for carpet floors Perimeter profiles in anodised aluminium for flexible floors such as moquettes and coconut mats. The profiles, by pressing them, close, locking the edge, covering the cutting defects and preserving the edge. Available in the perforated and with hooks version to allow a better grip of the moquette.

CARPETEC MS edging tims for carpet floors

profilitec > Accessories

CARPETEC MS edging tims for carpet floors Rounded perimeter profile in anodised aluminium or brass for flexible floors such as moquetteing and coconut mats. The profiles, by pressing them, close, locking the coating in a lasting way, covering the cutting defects and preserving the edge. The profile is serrated both in the rounded part on the inside and on the surface to allow a better grip of the moquette.

ENTRYTEC BU Profiles for entrance mattings

profilitec > Accessories

ENTRYTEC BU Profiles for entrance mattings Reversible profile to create perimeters suitable for containing coconut doormats, moquettes or technical aluminium doormats. The profile, thanks to the particular shape, allows to obtain the two most common doormat thicknesses of 18 and 23 mm. The laying of the frame, which can be easily assembled with the brackets supplied, must be prepared at a height before laying the adjacent floor. The profile can also be laid with the help of modular and sliding fixing brackets inside the slots.

ROUNDTEC RD Transition trims for floors with different heights

profilitec > Accessories

ROUNDTEC RD Transition trims for floors with different heights The ROUNDTEC profile is mainly used in transitioning floor types of different thicknesses, for example from ceramic tile to thin linoleum. Its rounded section provides a smooth level change of 3mm, making it suitable between two floor types or as an end profile. ROUNDTEC can even be used as stair nosing or edging for tile countertops. Available in brass with patented dovetail anchoring.

ZEROTEC ZRM Ramp trims for floors with different heights

profilitec > Accessories

ZEROTEC ZRM Ramp trims for floors with different heights ZEROTEC ZRM profile is the ideal solution for joining two floors at different levels, between a ceramic covering and one in moquette moquetteing for instance. This trim allows a 5 mm progressive sloping difference to the next floor to match thus making safer when treading over the connecting floors. The ramp inclination has been conceived for vehicle and wheel carts transit.

ZEROTEC ZR Transition trims for floors with different heights and of different materials

profilitec > Accessories

ZEROTEC ZR Transition trims for floors with different heights and of different materials ZEROTEC ZR allows the installer to perfectly match different floor levels when laying ceramic tile or wood flooring over an existing floor. Because of the slope, ZEROTEC profiles are ideal in passage areas for hand trolley and cars, while providing edge protection resistant to vertical loads. The brass version is recommended for industrial applications in garages and shopping centers. Available in aluminium and brass with patented vertical dovetail anchoring. ZEROTEC ZR Curveline: bendable version of the Zerotec Some ZEROTEC ZR profiles are also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code.

Zerotec ZRN60 Transition trims for floors with different heights and of different materials

profilitec > Accessories

Zerotec ZRN60 Transition trims for floors with different heights and of different materials Zerotec ZRN60 has been designed to optimize transitions between different flooring materials, situation that often occurs in public environments such as hotels and restaurants. Its delicate line and its defined inclination allow to optimize the transition between different heights: from 8, 10 or 12.5 mm thick tiles to another 6 mm thick floor, giving a modern and elegant touch to the environment. The ramp length is 8.5 mm fixed for all heights. This particular design protects and hides the portion of the underlying coating (6 mm thick) from impacts and mechanical hits, preventing its possible breakage.

Zerotec ZR60 Transition trims for floors with different heights and of different materials

profilitec > Accessories

Zerotec ZR60 Transition trims for floors with different heights and of different materials Zerotec ZR60 has been designed to optimize transitions between different flooring materials; it can be typically found in public spaces, like hotels and restaurants. Its delicate line and gradual inclination allows a smooth transition between different floor levels: from 8 mm, 10 mm and 12.5 mm tile to an adjacent floor covering with a thickness of 6 mm, excellent for modern and elegant interior detailing. The profile’s unique shape hides and protects the edge of the flooring below (6 mm thickness) from mechanical impact, hiding imperfections while preventing damage caused by passage and use.

Profili RAMPTEC ZRR Ramp trims for floors with different heights

profilitec > Accessories

Profili RAMPTEC ZRR Ramp trims for floors with different heights The 20° slope of the anodised aluminium RAMPTEC ZRR profile provides a safe and progressive transition between two different floor levels. The vertical edge has a dovetailed internal cavity that maximizes grout and adhesive grip on load bearing points.

LEVELTEC RPR Transition trims to be used after flooring installation

profilitec > Accessories

LEVELTEC RPR Transition trims to be used after flooring installation LEVELTEC RPR is a model with the function of perimeter or connection profile between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wooden floors or moquetteing. LEVELTEC RPR is able to compensate for differences of 8 ÷ 14 mm. The profile is normally supplied with an adhesive with high sealing characteristics or without an adhesive.

LEVELTEC RP Transition trims to be used after flooring installation

profilitec > Accessories

LEVELTEC RP Transition trims to be used after flooring installation LEVELTEC RP is a series of profiles with a terminal or connecting function between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wood or carpet floors. The LEVELTEC RP series consists of profiles with heights between 4.5 ÷ 12.5 mm, capable of compensating for height differences of 3 ÷ 14 mm. The profile is normally supplied with adhesive of high sealing properties. They are also available in a drilled version for fixing with screws and dowels. LEVELTEC RP: transition profile in different dimensions Smooth and grooved LEVELTEC profiles in varying widths and heights transition floors of different elevations. Their sectional thickness makes them especially suitable for high traffic areas and the end detailing allows frictionless contact between the profile and floor. LEVELTEC RP how to install Installation of self-adhesive version: 1) Make sure the base is solid, flat, level, clean, and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

VARIOTEC DC Adhesive flooring profiles

profilitec > Accessories

VARIOTEC DC Adhesive flooring profiles VARIOTEC DC profiles’ innovative design elegantly rotates and adapts to match different floor elevations. By simply rotating its shape, this profile can adapt to floor thicknesses ranging from 7 to 14mm. Use our adhesive for on-site installation.

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8")

profilitec > Accessories

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8") Especially conceived for residential and light commercial use, VARIOTEC DK profiles are available in a wide range of decorative finishes. This profile series is designed to join different floor types with an elevation difference ranging from 7 to 16mm. VARIOTEC DK profiles are self-adhesive - simply cut the profile to the desired length, remove the adhesive backing and press uniformly downwards on to the profile to install. Always make sure the base is solid, flat, level, clean and dry.

VARIOTEC DR Transition trims to be used after flooring installation

profilitec > Accessories

VARIOTEC DR Transition trims to be used after flooring installation VARIOTEC DR are stainless steel or brass profiles used as a transition between already installed floors of different nature and level. Self-adhesive: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

Recently Viewed Products

A wide range of product from furniture to finishes to meet the desire of all designers.

Edge 3-seat Sofa - Grace Light blue - 70

fest-amsterdam > Sofa

You can never go wrong with the Edge. This timeless design sofa is super solid and very comfortable... we are sure that you will enjoy it for many years.

Plan Table

fredericia > Table

The Plan Table with fixed dimensions is a simple 4-legged table fit for smaller spaces or needs, to be used as a dining table, for the home office or as an intimate meeting table. Both Plan Table Fixed and Plan Table Extendable are available in solid wood tabletops in oak for a natural and tactile feel highlighting the Fredericia woodworking competencies.

STRIPTEC STB: Transition trims for floors with the same heights

profilitec > Accessories

flotex hospitality & leisure textile Newport Indigo

forbo > Carpet

Forbo has created a special collection of Flotex floors with striking designs for the hospitality & leisure segment. The high performance Flotex flocked floor coverings provide comfort and safety while leaving plenty of space for design.Give your interior a cosy effect with Flotex floor designs inspired by textiles and materials. Play around with the Plaid items for a vintage effect or create an extra comfortable look with the carpet aspect of the Newport design.To easily visualize the scale of the designs, please see our Hospitality & Leisure brochureAll items of the Flotex H&L collection are also available in an adhesive free flooring solution: Flotex Next. You can order a Flotex Next floor by adding the code NX as a suffix behind the regular colour number.

BLOCK SEAT - Modular sectional fabric sofa _ Moroso

Moroso > Sofa

The Block Seat system from Moroso's Sushi Collection is a sophisticated seating solution crafted from stress-resistant, flame-retardant polyurethane foam in varied densities, complemented by polyester fiber upholstery on a sturdy wood frame, with durable polypropylene feet. The collection, which includes the Blue Edition alongside Red, Green, and Grey variants, features a striking array of designs—ranging from damask embroidery and oriental symbolism to floral patterns and digital grids—creating a visual tapestry that blends traditional, futuristic, and romantic elements. Designed for lounge areas, the Sushi Collection offers versatile seating options, from open benches and poufs to high-walled chairs for private conversations, all unified by harmonious colors and patterns. The fabrics, woven by Febrik, are both durable and comfortable. A 3D file of the product is available for download, allowing for seamless integration into design projects. Moroso, an Italian design powerhouse founded in 1952, is celebrated for its innovative, high-end furniture and collaborations with renowned designers like Patricia Urquiola, offering premium pieces that elevate residential and commercial spaces worldwide.

APRIL - Folding chair _ Zanotta

zanotta > Chair

The April folding chair is a versatile and stylish piece designed for both indoor and boat use, featuring a durable 18/8 stainless steel frame, aluminum alloy joints, and a removable cover available in outdoor-friendly VIP fabric, Telastrong, or premium cowhide 95. For additional details, the manufacturer, Zanotta, provides comprehensive information on their website. Zanotta, a renowned Italian interior design brand established in 1954, is celebrated for its innovative, high-quality furniture and home accessories, blending modern aesthetics with exceptional craftsmanship. A 3D file of the April chair is also available for download, allowing customers to visualize the product in their space.

ORTIGIA - DISEGNO - Stone effect vinyl wallpaper _ Élitis

Élitis > Wallpaper

**Ortigia - Disegno** is a premium embossed vinyl wallpaper designed to mimic the appearance of whitewashed walls, offering a washable, fire-retardant, and UV-resistant finish. Crafted from vinyl on a paper base, it features a chalky, sand-like matte texture that evokes the charm of sunlit Mediterranean alleyways. Available in three captivating variants—La Perle Sicilienne (VP 961 01), Poésie Végétale (VP 961 02), and Porcelaine d'Antan (VP 961 03)—this collection blends warm hues and mineral travertine tones, inspired by the earthy patina of ancient walls and the playful dance of light and pigment. A 3D file of the product is available for download, allowing for seamless integration into design projects. **Élitis**, the supplier behind this collection, is a globally recognized French interior design brand founded in 1988, celebrated for its innovative and luxurious wallcoverings, fabrics, and furniture that combine bold patterns, rich textures, and timeless elegance.

WAITING FOR EVE - Tropical vinyl wallpaper _ Élitis

Élitis > Wallpaper

The iconic Big Croco and Anguille vinyl patterns, known for their remarkable leather effects, have been reimagined with a more crafted and dreamlike aesthetic, drawing inspiration from art and painting to create bold, creative atmospheres. Big Croco showcases the patina of aged leather and metallic highlights, while Anguille mesmerizes with delicate patchworks and a vibrant palette of shimmering hues, metallic tones, and matte solids. This panoramic wallpaper is permanent fire-resistant, washable, and offers excellent stain and knock resistance, meeting ASTM E84 Class A standards, with a composition of vinyl on a paper ground. A 3D file of the product is available for download, allowing for seamless integration into design projects. Supplied by Élitis, a prestigious French interior design brand founded in 1988, renowned for its innovative and luxurious wallcoverings, fabrics, and furniture that blend contemporary style with timeless elegance.

DSR FIBERGLASS CHAIR - Glass-fibre chair _ Vitra

vitra > Chair

The DSR Fiberglass Chair, designed by the iconic duo Charles and Ray Eames, is a timeless piece of furniture that revolutionized the industry when it was first introduced in 1950. This chair pioneered the concept of a multifunctional design, featuring a versatile shell that can be paired with various bases to suit different needs and settings. Over the years, its popularity led to an expanded range of colors and base options, solidifying its status as one of the most recognizable furniture designs of the 20th century. Manufactured by Vitra, the chair is available in some of the original early colors, with its fibreglass shell celebrated for its vibrant, textured appearance, reminiscent of natural materials due to its visible fibres. For those seeking a modern alternative, the Eames Plastic Chair with a polypropylene shell is also available, offering a durable and lightweight option. Together, these chairs form a versatile family of designs, allowing for endless customization to match any taste or purpose. Additionally, a 3D file of the DSR Fiberglass Chair is available for download, enabling designers and enthusiasts to explore its dimensions and details digitally. Vitra, the Swiss family-owned company behind this iconic piece, is renowned for its innovative and timeless furniture designs, collaborating with legendary designers to create functional, aesthetically pleasing pieces for homes, offices, and public spaces.

GARDEN LAYERS TARTAN. BLUE - Rectangular polypropylene outdoor rugs with geometric shapes _ GAN

GAN > Carpet

**GARDEN LAYERS**, the first outdoor collection by Patricia Urquiola for GAN, is a stunning fusion of artistry and functionality, inspired by the serene beauty of Mongol architecture and gardens. This collection, part of the GAN Spaces series, features rugs, mats, roll pillows, and cushions that can be creatively arranged to transform any outdoor space into a haven of relaxation and style. Drawing from Oriental influences, the designs encourage reclined lounging, with intricate fringes, geometric motifs, and a harmonious blend of textures. Available in three captivating color groups—terracotta, grey, and blue—the collection combines inspired aesthetics with cutting-edge materials, including weather-resistant yarns and quick-drying foams, ensuring durability and comfort for outdoor use. For added convenience, a 3D file of the product is available for download, allowing for seamless integration into design projects. **GAN**, a globally recognized interior design brand founded in 1941 and headquartered in Spain, is celebrated for its innovative, high-quality rugs and textiles, offering a diverse range of products that cater to both contemporary and traditional design sensibilities.

HAMILTON - Sectional leather sofa _ Minotti

minotti > Sofa

The Hamilton seating system, designed by the esteemed Italian luxury furniture brand Minotti, offers a sleek and versatile design with three distinct versions: Hamilton, Hamilton “Sofà,” and Hamilton “Modulo.” Known for its modular flexibility, this collection features low-profile bases with polished Black-Nickel or Bronze finishes, blending technological innovation with timeless elegance. The system’s adaptability allows for endless configurations, making it suitable for any space or need. For added comfort, Hamilton includes optional headrests to promote good posture during relaxation. The structure is crafted from solid wood, with high-resilience polyurethane foam and goose-down cushions for unparalleled comfort. Covers are fully removable in fabric versions, while leather versions are non-removable. Additional cushions in various sizes and finishes are available to customize the look. A 3D file of the product is available for download, enabling seamless integration into design projects. Minotti, founded in 1948 and headquartered in Meda, Italy, is globally recognized for its premium, contemporary furniture that combines craftsmanship, innovation, and luxury, making it a favorite among discerning clients worldwide.

EVERGREEN OF PEACE TREE - Christmas porcelain decorative object _ Lladró

Lladró > Accessories

The **Evergreen of Peace Tree** is a beautifully crafted glossy porcelain figurine depicting a Christmas tree adorned with two delicate angels placing a "Peace" sign upon it, symbolizing harmony and serenity. This elegant piece, sculpted by Joan Coderch, is made from high-quality gloss porcelain, making it a timeless addition to holiday decor or a thoughtful gift for collectors. A 3D file of the product is also available for download, allowing for a closer look at its intricate design. Lladró, the esteemed Spanish brand behind this creation, was founded in 1953 by the Lladró brothers and is celebrated worldwide for its exquisite porcelain sculptures, figurines, and home accessories, blending artistry and craftsmanship to bring elegance and sophistication to interior spaces.

DOLLY - Leather armchair with armrests _ Natuzzi Italia

Natuzzi Italia > Armchair

The Dolly armchair, designed by acclaimed architect Claudio Bellini, combines fresh, enveloping aesthetics with exceptional comfort, featuring a generous seat with outward-curved armrests, thin metal feet in various finishes for an elegant and lightweight look, and optional contrasting piping that highlights its craftsmanship. Enhanced with a layer of Memory Foam, the armchair ensures lasting comfort and support while maintaining its timeless appeal. Available in a wide selection of premium fabrics and fine Natuzzi leather upholstery, the Dolly armchair seamlessly adapts to diverse interior styles. A downloadable 3D file of the product is also available for design planning. Crafted by Natuzzi Italia, a globally renowned Italian luxury furniture brand founded in 1959, the Dolly armchair reflects the company’s commitment to exquisite craftsmanship, timeless elegance, and innovative design, making it a perfect addition to both residential and commercial spaces. Explore more at [Natuzzi Italia](https://www.natuzzi.it).

CRYSTAL - Fabric wall lamp for bathroom _ Devon&Devon

Devon&Devon > Wall lamp

The CRYSTAL wall lamp is an elegant bathroom lighting solution featuring a fabric and brass design, highlighted by a striking crystal prism that draws inspiration from the sophisticated aesthetics of the early 1940s. The lampshade is crafted in a soft cream hue, delicately edged with tone-on-tone grosgrain, while the turned brass arm adds a touch of timeless refinement. Available in a variety of finishes, including chrome, light gold, satin nickel, and polished nickel, this IP20-rated lamp supports a maximum power of 40W (E14 IBT) and weighs 2.09 kg. For added convenience, a downloadable 3D file of the product is available for design and visualization purposes. Devon&Devon, the esteemed Italian supplier behind this exquisite piece, has been a leader in luxury bathroom furnishings since its founding in Florence in 1989, renowned for its commitment to timeless elegance, exceptional craftsmanship, and sophisticated design.

ESSEX ARM - Wall lamp _ Devon&Devon

Devon&Devon > Wall lamp

The ESSEX ARM is a beautifully crafted brass wall lamp, featuring a timeless design adorned with plant-inspired motifs and an elegant curvilinear arm, designed to complement Madelaine, Sfera, and Tulip glass diffusers. Made from high-quality brass, it is available in chrome, light gold, or polished nickel finishes, with an IP20 classification, a maximum power of 40W E14, and a weight of 0.74 kg. A 3D file of the product is available for download, allowing for detailed visualization and integration into design projects. Devon&Devon, the esteemed Italian supplier behind this piece, is celebrated for its luxurious bathroom furnishings and decor, blending classic and contemporary styles with exceptional craftsmanship since its founding in Florence in 1989.

BLACK DIAMOND - 3 hole wall-mounted bathtub mixer _ Devon&Devon

Devon&Devon > Tap

The Black Diamond is an exquisite wall-mounted bath mixer featuring a hose and handset, distinguished by its ribbed levers and diamond-polished crystal "bejewelled" finishes, crafted to reflect the pinnacle of Italian artisanal tradition. Made from high-quality brass, it is available in a variety of luxurious finishes, including bronze, chrome, polished nickel, and light gold, ensuring it complements any sophisticated bathroom design. A 3D file of the product is available for download, allowing for seamless integration into design plans. Devon&Devon, the esteemed supplier behind this masterpiece, is a Florence-based luxury interior design brand founded in 1989, celebrated worldwide for its timeless, high-end bathroom furnishings and fixtures that blend classic elegance with contemporary innovation.

NILE 40 - Design countertop square ceramic washbasin _ Ceramica Flaminia

Ceramica Flaminia > Washbasin

The **Nile Countertop Square Basin** is a sleek, modern design by Patrick Norguet, featuring a minimalist aesthetic without an overflow or tap ledge. Part of the expanded Nile collection, this basin is available in various sizes and depths, including vessel and semi-drop-in options, alongside wall-mounted toilets and bidets. The collection showcases a harmonious blend of geometric precision and soft, organic details, highlighting the versatility of ceramic and Norguet’s signature design philosophy—creating essential, functional, and timeless pieces that seamlessly integrate into diverse settings. A 3D file of the product is available for download, allowing for easy visualization and planning. **Ceramica Flaminia**, the esteemed Italian supplier behind this collection, has been a leader in high-quality ceramic bathroom fixtures since 1955, renowned for its premium craftsmanship, minimalist designs, and luxurious offerings tailored for both residential and commercial spaces.

IO - Pietraluce® bathtub _ Ceramica Flaminia

Ceramica Flaminia > Bathtub

The IO collection by Flaminia is a harmonious blend of rational geometry and minimalistic design, offering a sophisticated bathroom concept that fuses elegant lines with innovative functionality. This collection features three vanity basins in varying sizes, a visually striking bathtub, and a wall-hung WC and bidet, all designed with refined ergonomics and modern aesthetics. Additionally, a 3D file of the product is available for download, allowing for seamless integration into design projects. Ceramica Flaminia, a renowned Italian supplier founded in 1955, specializes in premium ceramic bathroom fixtures and furnishings, celebrated for their minimalist designs, exceptional craftsmanship, and global presence in both residential and commercial markets.

ETHOS - Ceramic handrinse basin _ GALASSIA

Galassia > Washbasin

The **8430 Hand-basin** is a 50cm wall-hung basin with a tap hole arranged for right or left installation, featuring a timeless and elegant design that complements classic bathroom aesthetics. It comes with a fixing kit for easy installation and is available in versions with or without a ceramic back upstand, as well as an option with turned legs for added sophistication. A 3D file of the product is available for download, allowing for seamless integration into design plans. Supplied by **GALASSIA**, a renowned Italian interior design company specializing in high-quality ceramic and bathroom furnishings, the brand is celebrated for its innovative designs and versatile product range, catering to both residential and commercial spaces worldwide.

TABULA CRITA227 - Countertop single handle washbasin mixer _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **Tabula CRITA227** is a single-control, single-hole deck-mounted medium washbasin mixer featuring mechanical mixing and a 1" 1/4 U&D* drain. Designed by Angeletti Ruzza for the Tabula collection by CRISTINA, this mixer embodies a minimalist yet striking aesthetic, with its angular body and clean, decisive profile that emphasizes pure form. The lever, thoughtfully proportioned for both functionality and elegance, complements the contemporary design. Available in a variety of finishes—including white matt, polished black chrome, brushed metallic, black matt, PVD polished rose gold, and PVD brushed rose gold—the Tabula CRITA227 is part of a versatile collection that includes elements for washbasins, bidets, baths, and showers, ensuring a cohesive total-look style. A 3D file of the product is available for download, making it easier for designers and architects to integrate it into their projects. **CRISTINA Rubinetterie**, established in 1949 in Gozzano, Italy, is a renowned leader in high-quality faucets and bathroom accessories, celebrated for blending cutting-edge technology with timeless elegance. Their commitment to craftsmanship and innovative design has made them a trusted name in luxury and contemporary spaces worldwide.

LUCYLLE - Upholstered easy chair with armrests _ Lema

Lema > Chair

**Lucylle** is an elegant easy chair crafted from fabric or leather, featuring armrests and designed by Roberto Lazzeroni with a timeless vintage-inspired aesthetic. Part of a versatile seating collection that includes dining chairs, stools (both high and low), and a lounge chair, Lucylle combines classic proportions with a delicate yet refined appeal. Its structure is made of thermo-treated solid ash, stained in an oak finish, while the soft padding is upholstered in premium fabric, leather, or eco-leather, accented by lapped seams that highlight Lema’s artisanal craftsmanship. The stools are further enhanced with sleek steel footrests. A 3D file of the product is available for download, allowing for seamless integration into design projects. **Supplier Description:** Lema, a prestigious Italian design house since 1970, is renowned for its premium furniture and accessories, blending modern elegance with meticulous craftsmanship. For more details, visit the manufacturer’s page: [LUCYLLE | Easy chair – Lema](#).