LEVELTEC RP Transition trims to be used after flooring installation by Profilitec

TRIMTEC TR: multipurpose profiles in different materials

Profilitec > Accessories

TRIMTEC TR: multipurpose profiles in different materials TRIMTEC TR is a complete range of brass, aluminium and stainless steel trim profiles designed for fast and efficient installation of any flooring type, regardless of size and thickness. TRIMTEC TR is available in various heights from 2 to 30 mm, matching different tile thicknesses. In the aluminium and brass versions, a dovetail groove maximizes the grout grip and edge protection for both vertical and horizontal tile laying. TRIMTEC TR profiles are conceived for tile laying, but can also be used with other types of flooring such as stone, wood and industrial resin floors. TRIMTEC TR profiles are mainly used as transition trims between two types of flooring (for example between tiling and moquetteing) and as expansion joints when two lengths are laid side by side. They can also be used as trimming for ceramic skirtings and as edge protection for any floor thickness. In some cases the profiles may be used as entrance mat framing. TRIMTEC TR Curveline: the bendable version of the TR TRIMTEC TR series is also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code. TRIMTEC TR how to install 1) Choose the trim size according to the tile thickness. The trim should be 0.5+/-1mm lower than the tile, therefore not exceeding the height of the tile. 2) Apply tile adhesive. 3) Cut the profile to required length, leaving extra space for linear expansion. The perforated flange of the trim is then firmly embedded into the adhesive and aligned. 4) Trowel an additional layer of adhesive over the perforations in the profile and in the dovetail groove of the vertical section. 5) Leave a tiny gap of approximately 0.5+/-2mm between the trim and the tile for final grouting.

TRIMTEC SR Edging perimeter profiles for ceramic floors

Profilitec > Accessories

TRIMTEC SR Edging perimeter profiles for ceramic floors TRIMTEC SR is especially recommended for finishing the perimeter of ceramic floors, particularly when they abut a vertical surface. It is also used as stair nosing and trimming in balconies and exit ways. TRIMTEC SR profiles have an extended vertical edge to cover and protect border surfaces and prevent future cracking. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. The aluminium section is designed with vertical dovetail anchoring. TRIMTEC SR CURVELINE: bendable profiles TRIMTEC SR series is also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code.

BORDERTEC SBR Edging profiles for balconies and patios

Profilitec > Accessories

BORDERTEC SBR Edging profiles for balconies and patios The BORDERTEC BSR is recommended for contouring marble and stone balconies and sidewalks. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. BORDERTEC BSR in size BSR 20/* can be used with PROFILITEC floating floor support systems. BORDERTEC BSR contains all necessary elements for state-of-the-art installation.

ROUNDJOLLY profiles for thin floors

Profilitec > Accessories

ROUNDJOLLY profiles for thin floors ROUNDJOLLY profiles join floor types of different thicknesses, finishing and protecting the tile edge. Available in aluminium and stainless steel, this profile is ideal for renovations with thin tiles.

SQUAREJOLLY SJ: square shape trims

Profilitec > Accessories

SQUAREJOLLY SJ: square shape trims Squarejolly SJ is a multipurpose aluminium profile used in laying adhesive ceramic floor and wall coverings. Its uniquely symmetrical shape lends itself to endless detailing possibilities. In the technical specs, H corresponds to the tile thickness and B = H + 1mm corresponds to the visible width of the profile. In the aluminium version, a patented internal cavity with a dovetail groove maximizes vertical grout grip and edge protection. The sectional design of the SQUAREJOLLY SJ profile provides a completely leveled surface, making it resistant to vertical loads and perfectly suitable for flooring applications. How SJ models can be used SQUAREJOLLY SJ is a multipurpose profile with a wide range of applications: • Leveled flooring intersections • Decorative accent bands • Wall tile contouring • Entrance mat framing • skirting finishing and edging • Stair nosing

COVERTEC EP: Transition trims for floors with the same height

Profilitec > Accessories

COVERTEC EP: Transition trims for floors with the same height The COVERTEC EP profile joins two adjacent flooring surfaces (for example: concrete/ceramic tile, wood/ceramic tile and other resin or vinyl floor combinations). The overlapping section allows differential movement of the flooring, hides edging imperfections and prevents chipping and cracking. Available in aluminium and brass with patented dovetail anchoring.

COVERTEC SP: T shape trims for floors with the same height

Profilitec > Accessories

COVERTEC SP: T shape trims for floors with the same height COVERTEC SP is a profile designed to join two adjacent existing floors at the same height but it can cover imperfections in cutting or slight variations of height to be found on a tiled floor joining to a wooden one for example. Thanks to its shape, available in 3 different widths, this profile helps floor coverings to maintain the minimum distance thus acting also as a dilatation joint.

STRIPTEC ST: Transition trims for floors with different heights (max 5mm)

Profilitec > Accessories

STRIPTEC ST: Transition trims for floors with different heights (max 5mm) STRIPTEC ST profiles are designed to join adjoining floors of equal or different type and thickness. The rounded shape of this profile covers edge imperfections and allows a slight rotation, compensating for elevation differences of up to 5mm. It can also be used as a termination profile, given a floor thickness of up to 5mm. Available in two versions: self-adhesive and screw-on. STRIPTEC how to install Installation of self adhesive version: 1) Make sure the base is solid, flat, level, clean and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of the pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

STRIPTEC ST38: Transition trims for floors with the same heights

Profilitec > Accessories

STRIPTEC ST38: Transition trims for floors with the same heights ST38 aluminium profiles (available in the adhesive or perforated version) for transition or threshold cover with knurled surface. Slightly rounded shape. The shaped edge allows perfect contact with the floor. Used to minimize installation defects and creating expansion joints.

STRIPTEC STP: Transition trims for floors with the same heights

Profilitec > Accessories

STRIPTEC STP: Transition trims for floors with the same heights STP Brass profiles (available in the adhesive or perforated version) for connection or threshold cover with smooth brass surface. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

STRIPTEC STB: Transition trims for floors with the same heights

Profilitec > Accessories

STRIPTEC STB: Transition trims for floors with the same heights STB profiles in brass or aluminium (available in the adhesive or perforated version) for connection or threshold cover with smooth brass and aluminium grooves. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

MULTICLIP CLG Transition trims for all kind of floors

Profilitec > Finishes accessories

MULTICLIP CLG Transition trims for all kind of floors The innovative, patented MULTICLIP® CLG 370 profiles has a tilting head to adjust minor height differences up to 3mm. MULTICLIP CLG allows flooring expansion and contraction making it the perfect transition profile in between different flooring materials. You can easily increase the height by stacking up to 3 plastic rails one on top of the other. A 16mm internal cavity acts as an expansion joint, allowing 5mm of differential movement. Typically, laminate wood flooring expands about 5mm per plank due to humidity.

MULTIFIIX CLG Transitions trims for floors with the same height

Profilitec > Accessories

MULTIFIIX CLG Transitions trims for floors with the same height Patented transition profile for floors at the same level, slightly rounded in anodised aluminium finish and with high resistance wood effect coating. This article has been conceived for a purely domestic environment and for Do-it-yourself use, to be fixed primarily with the nylon "MULTIFIX" plugs. MULTIFIX how to install 1. Forare con punta da 6 mm 2. Inserire gli appositi tasselli 3. Allineare i tasselli 4. Martellare in modo uniforme

MULTICOVER CLG - Transition trims for floors with the same height

Profilitec > Accessories

MULTICOVER CLG - Transition trims for floors with the same height CLG transition profiles in anodised aluminium finish and with high resistance wood effect coating. The elements that make up the MULTICOVER® system fit perfectly thanks to the plastic rail and do not move once clipped together. The profiles are also available in a perforated version, for fixing with screws and plugs or self-adhesive, equipped with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective paper from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry

WOODTEC LG edging trims for wooden floors

Profilitec > Accessories

WOODTEC LG edging trims for wooden floors WOODTEC LG profiles are specifically designed to join two adjoining floating wood floors. The size and shape of the profile section allows for differential movement typical of wood flooring. Its smooth top surface fits under doorways making it perfectly suitable for thresholds.

CARPETEC MG transition trims for carpet floors

Profilitec > Carpet

CARPETEC MG transition trims for carpet floors Designed for carpet flooring, CARPETEC MG profiles are composed of two elements: a base track onto which the carpet is laid, and an interlocking, grooved top piece that snaps shut and compresses the carpeting.

CARPETEC MP Transition / edging trims for carpet floors

Profilitec > Carpet

CARPETEC MP Transition / edging trims for carpet floors The multipurpose, grooved moquetteEC MP profiles designed to compress moquette flooring at different elevations. They may be used to join two types of moquetteing or as edge profiles.

STC Profile to cover electric cables

Profilitec > Accessories

STC Profile to cover electric cables Profile used to cover electric cables. Available in the adhesive version.

CUBETEC CU: Transition trims for floors with the same height

Profilitec > Accessories

CUBETEC CU: Transition trims for floors with the same height CUBETEC CU is a decorative profile that allows you to create a transition between floors of the same height or as a wall transition. The profile is characterized by the constancy of the visible dimension (8 mm) which is independent of the height of the profile. Available in polished AISI 304 stainless steel and satin steel.

CUBETEC FI: Transition trims for floors with the same height

Profilitec > Accessories

CUBETEC FI: Transition trims for floors with the same height CUBETEC FI is a linear and decorative finishing element which provides long-lasting and heavy-duty tile edge protection. The CUBETEC FI profile is a decorative joint between different flooring types, trimming for ceramic tile and suitable for welcome mat framing. Two profile widths are available in polished stainless steel AISI 304.

VARIOTEC DS Transition trims to be used after flooring installation

Profilitec > Accessories

VARIOTEC DS Transition trims to be used after flooring installation VARIOTEC DS is a stainless steel or brass profile for floors with differences in height from 7 to 12 mm. Supplied with adhesive on the lower side for a quick and long-lasting installation. Fitting to combine ceramic or parquet floors with lower thickness materials, such as moquettes or vinyl floors. Adhesives: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

LINETEC PR Transition trims

Profilitec > Finishes accessories

LINETEC PR Transition trims Extruded brass transition profile. Perimeter profile for wooden floors or ceramic with thickness 10 mm. They allow to solve quickly and with an excellent aesthetic result the most frequent junction situations between floors of different nature, where an appropriate connection system has not been foreseen at the time of installation.

LINETEC PQ Transition trims for floors with the same height

Profilitec > Accessories

LINETEC PQ Transition trims for floors with the same height Profiles in extruded brass or stainless steel for transition between floors already installed. It fits between floors of 10 mm thick. They allow to solve quickly and with an excellent aesthetic result the most frequent transition situations between floors of different nature, where an appropriate transition system has not been foreseen at the time of installation.

LINETEC PU Transition trims for floors with the same height

Profilitec > Accessories

LINETEC PU Transition trims for floors with the same height Extruded U-shaped brass profile for transition between floors already installed of 10 mm thick. It solves quickly and with an excellent aesthetic result the most frequent transition situations between floors of different nature, where an appropriate connection system has not been foreseen at the time of installation.

MULTICPLIP CLP perimetral trims that allows the flooring expansion / contraction

Profilitec > Accessories

MULTICPLIP CLP perimetral trims that allows the flooring expansion / contraction The patented MULTICLIP® CLP 270 aluminium perimeter profile allows floor edge finishing without skirtings. A 16mm internal cavity allows 3/16’’ (5mm) of differential movement. This profile is also suitable along sliding door tracks and as entrance mat framing.

WOODTEC LT edging trims for wooden floors

Profilitec > Accessories

WOODTEC LT edging trims for wooden floors The WOODTEC LT profiles are specifically designed for finishing the perimeter of floating wood floors, particularly when they transition to another floor type at the same elevation or abut a vertical surface. While acting as an expansion joint, they also allow floor edge finishing without skirtings. This profile is also suitable along sliding door tracks and as entrance mat framing. Installed with flathead screws.

CARPETEC MD edging tims for carpet floors

Profilitec > Carpet

CARPETEC MD edging tims for carpet floors Perimeter profiles in anodised aluminium for flexible floors such as moquettes and coconut mats. The profiles, by pressing them, close, locking the edge, covering the cutting defects and preserving the edge. Available in the perforated and with hooks version to allow a better grip of the moquette.

CARPETEC MS edging tims for carpet floors

Profilitec > Carpet

CARPETEC MS edging tims for carpet floors Rounded perimeter profile in anodised aluminium or brass for flexible floors such as moquetteing and coconut mats. The profiles, by pressing them, close, locking the coating in a lasting way, covering the cutting defects and preserving the edge. The profile is serrated both in the rounded part on the inside and on the surface to allow a better grip of the moquette.

ENTRYTEC BU Profiles for entrance mattings

Profilitec > Accessories

ENTRYTEC BU Profiles for entrance mattings Reversible profile to create perimeters suitable for containing coconut doormats, moquettes or technical aluminium doormats. The profile, thanks to the particular shape, allows to obtain the two most common doormat thicknesses of 18 and 23 mm. The laying of the frame, which can be easily assembled with the brackets supplied, must be prepared at a height before laying the adjacent floor. The profile can also be laid with the help of modular and sliding fixing brackets inside the slots.

ROUNDTEC RD Transition trims for floors with different heights

Profilitec > Accessories

ROUNDTEC RD Transition trims for floors with different heights The ROUNDTEC profile is mainly used in transitioning floor types of different thicknesses, for example from ceramic tile to thin linoleum. Its rounded section provides a smooth level change of 3mm, making it suitable between two floor types or as an end profile. ROUNDTEC can even be used as stair nosing or edging for tile countertops. Available in brass with patented dovetail anchoring.

ZEROTEC ZRM Ramp trims for floors with different heights

Profilitec > Accessories

ZEROTEC ZRM Ramp trims for floors with different heights ZEROTEC ZRM profile is the ideal solution for joining two floors at different levels, between a ceramic covering and one in moquette moquetteing for instance. This trim allows a 5 mm progressive sloping difference to the next floor to match thus making safer when treading over the connecting floors. The ramp inclination has been conceived for vehicle and wheel carts transit.

ZEROTEC ZR Transition trims for floors with different heights and of different materials

Profilitec > Finishes accessories

ZEROTEC ZR Transition trims for floors with different heights and of different materials ZEROTEC ZR allows the installer to perfectly match different floor levels when laying ceramic tile or wood flooring over an existing floor. Because of the slope, ZEROTEC profiles are ideal in passage areas for hand trolley and cars, while providing edge protection resistant to vertical loads. The brass version is recommended for industrial applications in garages and shopping centers. Available in aluminium and brass with patented vertical dovetail anchoring. ZEROTEC ZR Curveline: bendable version of the Zerotec Some ZEROTEC ZR profiles are also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code.

Zerotec ZRN60 Transition trims for floors with different heights and of different materials

Profilitec > Accessories

Zerotec ZRN60 Transition trims for floors with different heights and of different materials Zerotec ZRN60 has been designed to optimize transitions between different flooring materials, situation that often occurs in public environments such as hotels and restaurants. Its delicate line and its defined inclination allow to optimize the transition between different heights: from 8, 10 or 12.5 mm thick tiles to another 6 mm thick floor, giving a modern and elegant touch to the environment. The ramp length is 8.5 mm fixed for all heights. This particular design protects and hides the portion of the underlying coating (6 mm thick) from impacts and mechanical hits, preventing its possible breakage.

Zerotec ZR60 Transition trims for floors with different heights and of different materials

Profilitec > Accessories

Zerotec ZR60 Transition trims for floors with different heights and of different materials Zerotec ZR60 has been designed to optimize transitions between different flooring materials; it can be typically found in public spaces, like hotels and restaurants. Its delicate line and gradual inclination allows a smooth transition between different floor levels: from 8 mm, 10 mm and 12.5 mm tile to an adjacent floor covering with a thickness of 6 mm, excellent for modern and elegant interior detailing. The profile’s unique shape hides and protects the edge of the flooring below (6 mm thickness) from mechanical impact, hiding imperfections while preventing damage caused by passage and use.

Profili RAMPTEC ZRR Ramp trims for floors with different heights

Profilitec > Accessories

Profili RAMPTEC ZRR Ramp trims for floors with different heights The 20° slope of the anodised aluminium RAMPTEC ZRR profile provides a safe and progressive transition between two different floor levels. The vertical edge has a dovetailed internal cavity that maximizes grout and adhesive grip on load bearing points.

LEVELTEC RPR Transition trims to be used after flooring installation

Profilitec > Accessories

LEVELTEC RPR Transition trims to be used after flooring installation LEVELTEC RPR is a model with the function of perimeter or connection profile between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wooden floors or moquetteing. LEVELTEC RPR is able to compensate for differences of 8 ÷ 14 mm. The profile is normally supplied with an adhesive with high sealing characteristics or without an adhesive.

LEVELTEC RP Transition trims to be used after flooring installation

Profilitec > Finishes accessories

LEVELTEC RP Transition trims to be used after flooring installation LEVELTEC RP is a series of profiles with a terminal or connecting function between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wood or carpet floors. The LEVELTEC RP series consists of profiles with heights between 4.5 ÷ 12.5 mm, capable of compensating for height differences of 3 ÷ 14 mm. The profile is normally supplied with adhesive of high sealing properties. They are also available in a drilled version for fixing with screws and dowels. LEVELTEC RP: transition profile in different dimensions Smooth and grooved LEVELTEC profiles in varying widths and heights transition floors of different elevations. Their sectional thickness makes them especially suitable for high traffic areas and the end detailing allows frictionless contact between the profile and floor. LEVELTEC RP how to install Installation of self-adhesive version: 1) Make sure the base is solid, flat, level, clean, and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

VARIOTEC DC Adhesive flooring profiles

Profilitec > Accessories

VARIOTEC DC Adhesive flooring profiles VARIOTEC DC profiles’ innovative design elegantly rotates and adapts to match different floor elevations. By simply rotating its shape, this profile can adapt to floor thicknesses ranging from 7 to 14mm. Use our adhesive for on-site installation.

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8")

Profilitec > Accessories

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8") Especially conceived for residential and light commercial use, VARIOTEC DK profiles are available in a wide range of decorative finishes. This profile series is designed to join different floor types with an elevation difference ranging from 7 to 16mm. VARIOTEC DK profiles are self-adhesive - simply cut the profile to the desired length, remove the adhesive backing and press uniformly downwards on to the profile to install. Always make sure the base is solid, flat, level, clean and dry.

VARIOTEC DR Transition trims to be used after flooring installation

Profilitec > Accessories

VARIOTEC DR Transition trims to be used after flooring installation VARIOTEC DR are stainless steel or brass profiles used as a transition between already installed floors of different nature and level. Self-adhesive: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

Tank Champagne Glasses Black x2

Tom Dixon > Styling

A pair of mouth-blown champagne glasses presented in gift-worthy packaging. Handmade in Poland, the set of glasses have a modern faded black finish, setting a mysterious and indulgent tone. This pair of Tank glasses take their sculptural cue from the functional shapes and volumes of scientific glassware. Featuring a hot-cut edge and an etched Tom Dixon logo. More Information Each glass is handmade and variations will occur between items. Colour may change over time due to the character of the material. Hand-wash in warm soapy water and dry with a soft cloth. Not dishwasher safe. Do not use abrasive agents as this will damage the surface. Also available as Whiskey, Beer, Wine, High Ball and Low Ball glasses. The collection also includes a Jug, Decanter and Whiskey Decanter, and is available in a copper finish.

Tank Black High Ball Glasses Set x 6

Tom Dixon > Styling

Set includes 6 Tank High Ball Glasses in black.Made in Poland, this Tank High Ball Glasses Set takes its sculptural cue from the functional shapes and volumes of scientific glassware. Featuring a hot-cut edge and an etched Tom Dixon logo. More Information Each glass is handmade and variations will occur between items. Colour may change over time due to the character of the material. Hand-wash in warm soapy water and dry with a soft cloth. Not dishwasher safe. Do not use abrasive agents as this will damage the surface.

Mirror Ball LED Pendant Gold 25cm

Tom Dixon > Ceiling lamp

One of the most identifiable Tom Dixon products, inspired by the famous space helmet, and by disco balls. Mirror Ball is lightweight yet robust and reflects its environment, projecting downward ambient light. Available in the original chrome finish, and in gold, with two different designs; pendant and tripod stand, this versatile collection offers a lamp for every function. More Information The LED module offers three key benefits - longer life expectancy, energy efficiency and improved performance including dimmability and light control. Our integrated LED module is fully serviceable and replacement components and individual drivers are available if needed.

Tank Gift Set Whiskey Glasses x 4 Green

Tom Dixon > Styling

Tank is a series of drinking vessels constructed using the simplest geometric language of spheres cones and cylinders. Their pared back aesthetic combined with the solid counterweight of thick and solid glass as a stem or pedestal gives them an instantly recognisable minimal silhouette. This year we see them burst into colour, albeit, in a particularly sophisticated and restrained emerald green. Our choice of green seems timely given that the colour is associated with all things positive, from health and growth, to calming and anxiety-reducing, vitality and nature. More Information Made in Poland from mouthblown glass, Tank Whiskey takes its sculptural cue from the functional shapes and volumes of scientific glassware. The giftset includes four whiskey glasses. This year, the Tank collection features a burst of colour, albeit, in a particularly sophisticated and restrained emerald green.

Botanica by Tokujin Yoshioka

Mutina > Floor tile-stone

With Botanica, Tokujin Yoshioka expresses once again his deep fascination for the natural world, its different characteristics and the poetry of its forms, designing the first Mutina mosaic specially developed for floors. The collection is produced in non-rectified glazed porcelain stoneware, with an innovative digital system for the dry application of glazes.

Déchirer by Patricia Urquiola

Mutina > Floor tile-stone

Déchirer was a breakthrough in the world of designer tiles. The use of Continua technology allowed to realise large slabs in unglazed porcelain stoneware, modular and single work-size, that can be used both on floors and walls. The bas-reliefs that elegantly cross the surface are barely visible; they are not mere decorations, but represent what remains of torn memories. The colour palette is composed by neutral tones that allow to create changeable spaces, harmonic and enchanting, yet able to keep a contemporary look.

VARIOTEC DS Transition trims to be used after flooring installation

Profilitec > Accessories

VARIOTEC DS Transition trims to be used after flooring installation VARIOTEC DS is a stainless steel or brass profile for floors with differences in height from 7 to 12 mm. Supplied with adhesive on the lower side for a quick and long-lasting installation. Fitting to combine ceramic or parquet floors with lower thickness materials, such as moquettes or vinyl floors. Adhesives: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

ZEROTEC ZRM Ramp trims for floors with different heights

Profilitec > Accessories

ZEROTEC ZRM Ramp trims for floors with different heights ZEROTEC ZRM profile is the ideal solution for joining two floors at different levels, between a ceramic covering and one in moquette moquetteing for instance. This trim allows a 5 mm progressive sloping difference to the next floor to match thus making safer when treading over the connecting floors. The ramp inclination has been conceived for vehicle and wheel carts transit.

LEVELTEC RP Transition trims to be used after flooring installation

Profilitec > Finishes accessories

LEVELTEC RP Transition trims to be used after flooring installation LEVELTEC RP is a series of profiles with a terminal or connecting function between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wood or carpet floors. The LEVELTEC RP series consists of profiles with heights between 4.5 ÷ 12.5 mm, capable of compensating for height differences of 3 ÷ 14 mm. The profile is normally supplied with adhesive of high sealing properties. They are also available in a drilled version for fixing with screws and dowels. LEVELTEC RP: transition profile in different dimensions Smooth and grooved LEVELTEC profiles in varying widths and heights transition floors of different elevations. Their sectional thickness makes them especially suitable for high traffic areas and the end detailing allows frictionless contact between the profile and floor. LEVELTEC RP how to install Installation of self-adhesive version: 1) Make sure the base is solid, flat, level, clean, and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

VARIOTEC DR Transition trims to be used after flooring installation

Profilitec > Accessories

VARIOTEC DR Transition trims to be used after flooring installation VARIOTEC DR are stainless steel or brass profiles used as a transition between already installed floors of different nature and level. Self-adhesive: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

ALE.01 - LED recycled material pendant lamp

Artemide > Ceiling lamp

This modern pendant light features a sleek, irregular metal shade that elegantly diffuses light downward, making it an ideal choice for dining areas. Its large scale and matte finish add a sophisticated touch to contemporary interiors.

IXA XL - LED wall lamp

Artemide > Wall lamp

This modern wall lamp features a sleek, adjustable design perfect for living rooms or workspaces. Crafted from matte-finished metal, its single globe shade offers both functionality and style. Ideal for adding a contemporary touch to any interior setting.

IXA - Adjustable metal floor lamp

Artemide > Floor lamp

This modern floor lamp by Artemide features a sleek, minimalist design with a matte metal finish, perfect for enhancing the ambiance of living rooms or offices. Its single dome shade directs light downward, providing focused illumination with a contemporary flair.

HOY SYSTEM - LED metal track-Light

Artemide > Ceiling lamp

The Hoy System pendant light by Artemide embodies a modern aesthetic with its sleek design and matte finish. Crafted from high-quality metal and glass, this medium-sized fixture is ideal for office spaces, providing focused downward lighting while enhancing the contemporary decor.

EGGBOARD CIRCLE - Acoustic pendant lamp

Artemide > Ceiling lamp

The EGGBOARD pendant light showcases a modern aesthetic with its playful, textured drum shades available in vibrant colors. Crafted from mixed materials, this medium-sized fixture is designed for pendant mounting, making it an ideal choice for dining areas seeking a touch of contemporary flair.

IXA - Adjustable metal desk lamp

Artemide > Table lamp

This modern table lamp features a sleek, matte yellow finish with a single globe shade, ideal for adding a touch of style to any workspace. Crafted from durable metal, its downward light direction ensures focused illumination, perfect for desk or office settings.

VEIL - LED metal floor lamp

Artemide > Floor lamp

This modern floor lamp by Artemide features a sleek, minimalist design with a brushed metal finish, perfect for enhancing the ambiance of a contemporary living room. Its adjustable light direction offers versatile illumination, making it both a functional and stylish addition to any interior space.

OSIDIO - LED adjustable metal wall lamp

Artemide > Wall lamp

This modern wall lamp by Artemide features a sleek, multidirectional design perfect for contemporary living spaces or offices. Crafted from matte-finished metal, its minimalist form provides both functional and ambient lighting. Ideal for adding a touch of elegance to any room.

LA LINEA - Silicone wall lamp / ceiling lamp

Artemide > Wall lamp

This modern pendant light by Artemide features a sculptural design that elegantly diffuses light, making it a striking centerpiece for any lobby. Crafted from high-quality plastic with a matte finish, its fluid form adds a touch of sophistication to contemporary interiors.

EGGBOARD BAFFLE - Fabric acoustic baffles

Artemide > Accessories

The Eggboard is a fabric acoustic baffle designed for sound absorption, particularly effective in managing reverberation associated with human voice frequencies. It features vertical suspension and panels with adjustable lighting, suitable for wall or ceiling installation. The suspension version offers a combination of indirect diffused light and direct controlled light, while the wall and ceiling versions allow for grazing light on both sides. The Eggboard's unique sinusoidal cross-section d...

LADY HIO - Round crystal table

Glas Italia > Table

The Lady Hio collection by Philippe Starck for Glas Italia is a sophisticated dining table that combines innovative materials and design elements to create a piece of furniture both elegant and functional. The tabletops are crafted with precision, featuring chamfered edges in transparent extralight or smoked tempered glass, as well as laminated glass available in various finishes such as transparent coloured, glossy coloured diffusor, and matt coloured diffusors. This versatile material selection allows for a wide range of aesthetic expressions. The legs of the Lady Hio dining table are meticulously crafted to complement the tabletops. They come in two distinct materials: Nero Marquina marble or white Arabesque grey veined marble, offering both durability and beauty. The legs are designed with tapered ends and fixed directly onto the tabletop, ensuring a stable and elegant presence on any floor. To enhance stability, these legs rest on floors thanks to sophisticated details such as brushed aluminum, anodized gold, rose copper, bronze, or nickel finishes. The Lady Hio dining table is not only visually striking but also designed with practicality in mind. Its construction ensures durability while maintaining a minimalist aesthetic. The collection is suitable for both residential and commercial settings, making it versatile enough to enhance any dining area without compromising on style or functionality. For the care of your Lady Hio dining table, it's important to handle it gently to avoid scratches or dents. Regular cleaning with a soft cloth and mild detergent can help maintain its pristine appearance. Avoid using harsh chemicals that may damage the surface finishes. Additionally, ensure proper ventilation when storing the table to prevent any moisture-related issues. The Lady Hio dining table by Glas Italia is more than just furniture; it's an embodiment of design excellence that seamlessly blends functionality with elegance. Its unique materials and construction make it a standout piece in any setting, making it ideal for both formal dining rooms and casual gatherings alike.

ON - Crystal wall shelf

Glas Italia > Cabinet

The On shelves are meticulously crafted from two high-quality tempered crystal plates, each measuring 8 mm in thickness. These durable and shatter-resistant materials ensure the shelves remain both robust and visually striking. Available in either an opaque lacquered or glossy lacquered finish, these shelves offer a versatile aesthetic option to complement any interior design scheme. The construction is designed for ease of installation, featuring a steel wedge that securely supports the shelf from below. This innovative design allows the On shelves to be easily hung on walls, eliminating the need for additional mounting hardware and providing a clean, minimalist look. The sleek, modern style of these shelves makes them ideal for contemporary living spaces. Design features include a seamless fusion of glass plates with a robust steel support system, creating a cohesive aesthetic that is both functional and stylish. These shelves are perfect for displaying decorative items such as books, vases, or artwork, adding an elegant touch to any room without overwhelming the space. Suitable applications range from home offices and living rooms to bedrooms and entryways, where they can serve as practical storage solutions while enhancing visual appeal. Their minimalist design ensures that these shelves blend seamlessly into various decor styles, making them a versatile choice for a wide array of settings. For optimal care, it is recommended to avoid direct sunlight exposure which may cause the lacquer finish to fade over time. Regular dusting with a soft cloth will help maintain their pristine appearance. Additionally, gentle cleaning using a mild glass cleaner can be employed if necessary, ensuring that these stylish shelves continue to sparkle and complement your home's interior for years to come. By choosing On shelves from Glas Italia, you invest in a product that combines functionality with aesthetic appeal, making it an excellent addition to any modern living space.

ROKOKÒ - Wall-mounted framed mirror

Glas Italia > Accessories

Discover the elegance and sophistication of our series of mirrors crafted into elegant frames, meticulously cut using advanced water jet technology. These mirrors are made from ultra-thin, transparent glass, offering a stunning visual effect that enhances any space with its sheer clarity and modern design flair. The construction is both durable and lightweight, ensuring longevity while maintaining an airy aesthetic. The style is contemporary yet timeless, blending seamlessly into various interior settings without compromising on sophistication. Our frames feature clean lines and minimalist designs, making them versatile for diverse room configurations and personal preferences. Design features include a sleek profile that complements any decor, with the glass mirror surface reflecting light beautifully to create a captivating visual experience. These mirrors are ideal for creating focal points in living rooms, bedrooms, bathrooms, or as decorative accents in office spaces. Their versatility allows them to be used both indoors and outdoors, depending on your needs. To maintain their pristine condition, it's important to handle these mirrors with care. Avoid direct exposure to heat sources such as radiators or fireplaces, which can cause thermal stress leading to potential breakage. Regular cleaning is also essential; use a soft cloth or microfiber towel dampened with mild soapy water for gentle maintenance. This approach will help preserve the mirror's clarity and longevity. Embrace the contemporary elegance of our glass mirrors today and transform your space with their captivating presence.

MIRROR BALL - LED polycarbonate floor lamp

Tom Dixon > Floor lamp

This contemporary floor lamp by Tom Dixon features a striking cluster of polished metallic globes, creating a bold statement piece for any living room. Designed for ambient lighting, its multi-light configuration offers a warm and inviting glow. Crafted with high-quality metal and finished to a luxurious polish, this lamp embodies modern elegance and sophistication.

CONO - Aluminium pendant lamp

Martinelli Luce > Ceiling lamp

The CONO pendant light by Martinelli Luce showcases a striking modern design with its bold red cone-shaped shade. Crafted from durable metal with a matte finish, this medium-sized fixture is ideal for dining areas, providing focused downward lighting that enhances contemporary interiors.

POLIEDRO - Polycarbonate pendant lamp

Martinelli Luce > Ceiling lamp

This modern pendant light features a sculptural design crafted from clear glass, offering a striking focal point for any living room. Its unique geometric shape and downward light direction create an elegant ambiance, making it a perfect addition to contemporary interiors.

AtelierM

Flou > Bed frame

The AtelierM double bed by Flou expresses refined comfort and Italian sleep culture with its tailored design and unique details.

GAUDÍ - Square wood and glass bedside table

Flou > Side table

Pierre Shell

Flou > Armchair

Modern designer armchair with rigid shell and soft cushions. Contemporary lines and calibrated comfort for Flou living areas and bedrooms.

Taormina

Flou > Bed frame

A double-size bed designed for extremely deep mattresses. A curved line forms the soft headboard, without interruptions.

Valet stand - Steel valet stand

Flou > Accessories

Duetto

Flou > Sofa

Extraordinarily versatile: sofa, dormeuse, single or twin beds occupying the space of just one bed.

STARCK - Square acrylic shower tray

Duravit > Shower tray

RUBY 86 - ABS shower wallbar with hand shower and hose

Carimali > Shower

LLOYD - Upholstered fabric bench

Longhi > Bench

GODWIN - Round fabric pouf

Longhi > Pouf

EMISFERO - LED brass pendant lamp

Tender rain > Ceiling lamp

Altura Shower column 3400284

Emmevi Rubinetterie > Shower

Brass adjustable height and directable shower column, with diverter, sliding adjustable shower holder and single-lever shower mixer. Set composed by: –brass

Batteria lavabo con bocca alta fissa senza scarico

Frattini Rubinetti dal 1958 > Shower

Playone 90 External part for wall-mounted built-in thermostatic shower mixer with stop valve

Fir Italia > Shower

External part for wall-mounted built-in thermostatic shower mixer with stop valve. Available in 18 finishes.

H382 CCD - Brass window handle on rose

Valli > Finishes accessories

The H382 CCD is a brass window handle meticulously crafted for those seeking both sophistication and durability in their home decor. Available in the exclusive Orantop and Bronzopaco finishes, this piece embodies artistry and elegance within its construction. Designed by internationally renowned designer Joe Cheng, the H382 CCD seamlessly blends traditional craftsmanship with contemporary design sensibilities. The handle's linear, oriental-inspired aesthetic is rendered with a modern twist, ensuring it remains both timeless and relevant in today’s interiors. The handle features clean, essential lines that are further enhanced by its edgeless profile, which subtly rounds the edges for an elegant touch. This design not only adds to the overall aesthetic appeal but also ensures smooth operation. One of the standout features is a unique 'circle' embossed on the front of the handle, allowing for customization and personalization. This distinctive element serves as a point of distinction, making each H382 CCD piece uniquely identifiable. The H382 CCD collection includes not only door handles but also window handles and privacy locks, catering to various architectural needs. The Orantop and Tortora finishes are exclusive to this model, offering unparalleled visual appeal and ensuring the handle remains a standout feature in any setting. For optimal care, it is recommended to clean the H382 CCD with a soft cloth and mild soap solution, avoiding harsh chemicals that could damage the brass finish. Regular maintenance will help preserve its lustrous appearance for years to come. This product is ideal for homeowners looking to enhance their home's aesthetic appeal while ensuring functionality and durability. Whether in residential or commercial settings, the H382 CCD window handle stands as a testament to contemporary design excellence.

H384 CR - Brass door handle on rose

Valli > Finishes accessories

The H384 CR is a robust brass handle, available in both standard and fireproof versions, offering durability for high-traffic areas or environments requiring added security. This collection features finishes including Cromosat, Bronzoscuro, and Neropaco, each providing unique aesthetic appeal while maintaining the classic elegance of brass. Designed by CetraRuddy's leading New York studio, the Fusital H384 CR Duemilaventuno collection is a testament to innovative design. Characterized by beveled yet sharp edges, inclined flat surfaces, and an emphasis on ergonomic functionality, this handle embodies both modernity and comfort in use. The collection includes door handles and window handles, making it versatile for various applications such as residential or commercial spaces where aesthetic appeal meets practical utility. The Duemilaventuno design allows users to appreciate the product from multiple angles, enhancing its visual impact and versatility. For enhanced hygiene and safety, BioCote® antimicrobial treatment is available in Dark Bronze and Neropaco finishes, ensuring that this handle remains hygienic even under frequent use. To maintain the H384 CR's appearance and functionality over time, it is recommended to clean with a soft cloth or sponge using mild soap and water. Avoid harsh chemicals or abrasive materials that could damage the surface finish. Regular inspection for any signs of wear or tear can also help prolong its lifespan. For optimal care and maintenance, refer to further information provided by the manufacturer on H384 CR | Door handle Valli.

H377 P SL - Brass door handle on rose

Valli > Finishes accessories

The H377 SL is a premium brass handle crafted in a dark bronze finish, complemented by an elegant brown leather insert. This product, part of the Fusital H 377 P SL Duemilaventi collection designed by Hong Kong architect and designer Steve Leung, seamlessly blends modern minimalism with traditional aesthetics. The design features a sleek, minimalist handle profile that is both functional and visually appealing. The construction of the H377 SL ensures durability and longevity through its robust brass material, providing a sturdy base for the elegant brown leather insert. This combination not only enhances the aesthetic appeal but also adds an element of luxury to any interior space. The collection includes door handles and window handles, offering versatility in both residential and commercial applications. For optimal performance and appearance, it is recommended to clean the H377 SL with a soft cloth and mild soap solution, avoiding harsh chemicals that could damage the finish or leather insert. Regular maintenance helps preserve the natural beauty of this sophisticated brass handle. The brown leather insert should be protected from moisture to maintain its color and integrity. The H377 SL is ideal for enhancing the elegance of contemporary living spaces while complementing traditional architectural styles. Its design features make it suitable for a wide range of applications, including modern homes, commercial offices, and high-end residential areas. By choosing this product, one can achieve both functionality and style in their interior design.

K374 - Brass door knob

Valli > Finishes accessories

The K374 is an exquisite brass knob designed with precision and elegance, crafted in durable materials to withstand daily use. This versatile brass knob features a sleek construction without any spring mechanism, ensuring smooth operation and longevity. Available in four stylish finishes—Chrome, Cromosat, Bronzosat, or Orsatop—the K374 offers a range of aesthetic options that complement various interior design schemes. In 2014, Valli & Valli marked an important milestone by launching the Compass collection, which includes the innovative K374. This new product represents the third revolution in handle design, elevating the handle to a more significant role as a sculptural element rather than merely a functional accessory for door opening. The Compasso knob is part of the Fusital series and embodies Valli & Valli's commitment to transforming handles into unique, almost sculptural pieces. This shift in perspective underscores the brand’s vision of redefining handle design, emphasizing their importance as integral elements within interior aesthetics rather than secondary features. For optimal performance and longevity, proper care is essential. Regular cleaning with a soft cloth can help maintain its lustrous finish. Avoid harsh chemicals or abrasive materials that could damage the surface. In addition to daily maintenance, periodic lubrication ensures smooth operation over time. By adhering to these simple care tips, you can preserve the K374's beauty and functionality for years to come. For further information on the K374, including its design features, suitable applications, and care instructions, please refer to the manufacturer’s detailed documentation provided by Valli & Valli.

H315 G - Metal door handle on rose

Valli > Finishes accessories

The H315 is a sophisticated brass and porcelain door handle by Pierluigi Cerri, designed to blend traditional elegance with contemporary appeal. This modern key-style handle offers a rustic yet refined aesthetic, available in two finishes: Chrome and Orolucido. The construction of the H315 features high-quality brass for durability and a porcelain insert that adds both visual interest and tactile comfort. The design is characterized by its clean lines and sleek profile, making it suitable for a wide range of interior settings including contemporary homes, minimalist spaces, and traditional architectural styles. Its versatility allows it to complement various door types such as kitchen cabinets, bathroom vanities, and bedroom doors. For maintenance, the H315 requires minimal care. A simple wipe with a damp cloth is sufficient to keep the porcelain surface looking its best. Regularly applying a light coat of clear protective wax can help prevent any minor scratches or marks from appearing on the brass finish. The handle's robust construction ensures longevity and reliability, making it an ideal choice for both residential and commercial applications where durability meets aesthetic appeal. Whether in a home office, hotel lobby, or boutique interior design project, the H315 is sure to enhance the overall look of any space. For further details on this product, please refer to manufacturer information available at H315 G | Door handle Valli.

K465 - Stainless steel door knob

Valli > Finishes accessories

The K465 is an exquisite satin-finished AISI 304 stainless steel door knob, meticulously crafted for both aesthetic appeal and durability. Manufactured with the highest quality materials, this product boasts a robust construction that ensures longevity under various environmental conditions. Crafted from AISI 304 stainless steel, which is renowned for its strength, corrosion resistance, and ease of maintenance, the K465 door knob stands out as a premium choice in modern interior design. The satin finish not only enhances visual appeal but also provides an additional layer of protection against scratches and fingerprints. Designed with sleek and contemporary aesthetics, this door knob features a minimalist yet sophisticated style that complements various architectural styles including modern, industrial, and traditional designs. Its uniformity and smooth surface make it ideal for both residential and commercial applications where a seamless integration is crucial. The K465's design includes ergonomic finger grooves designed to enhance comfort during operation while ensuring secure locking mechanisms. It comes with an easy-to-use installation system that simplifies the process, making it accessible even for those without professional assistance. For optimal performance and longevity, proper care should be given to this product. Regular cleaning with a soft cloth or sponge is recommended to maintain its pristine appearance. Avoid harsh chemicals and abrasive materials as they may damage the satin finish over time. In case of stubborn stains, consider using mild detergents specifically designed for stainless steel surfaces. The K465 door knob from Valli is not only a testament to superior craftsmanship but also an investment in both style and functionality. Its enduring quality and versatile design make it suitable for a wide range of applications where high-quality hardware is desired.

K1061 CENERENTOLA - Brass door knob

Valli > Finishes accessories

The K1061 is a brass knob available in the Orsatin, Bronzop, and Light Black finishes, designed by designers Luciana Di Virgilio and Gianni Veneziano of the Veneziano+Team studio. This collection embodies a harmonious blend between traditional Mediterranean aesthetics and contemporary design sensibilities, resulting in handles that are both soft yet essential. Crafted from high-quality brass, this K1061 is constructed with precise attention to detail, ensuring durability and longevity. The Orsatin finish exemplifies the softer, more curved lines characteristic of Mediterranean traditions, while the Bronzop option offers a slightly richer, more refined look. The Light Black variant provides an elegant backdrop for any interior design scheme. The collection's design features include soft but essential lines and sinuous profiles that complement its contemporary essence. This handle is not only functional but also visually appealing, making it suitable for both residential and commercial applications. It can be used as a door knob, window handle, or pull handle, enhancing the overall aesthetic of any space. For added hygiene benefits, the K1061 features BioCote® antimicrobial treatment on its Orsatop and Bronzop finishes. This coating helps to reduce microbial growth on surfaces, making it an ideal choice for environments where frequent hand contact is common. To maintain the beauty and longevity of your K1061, clean with a soft cloth or sponge using mild soap and water when necessary. Avoid harsh chemicals that could damage the surface finish. Regular cleaning will help preserve its appearance over time. For further information on this product, please consult the manufacturer's details for K1061 CENERENTOLA | Door knob Valli.