STAIRTEC SM Stair nosing trims for low thickness floors - 2d files - 3d files

TRIMTEC TR: multipurpose profiles in different materials

profilitec > Accessories

TRIMTEC TR: multipurpose profiles in different materials TRIMTEC TR is a complete range of brass, aluminium and stainless steel trim profiles designed for fast and efficient installation of any flooring type, regardless of size and thickness. TRIMTEC TR is available in various heights from 2 to 30 mm, matching different tile thicknesses. In the aluminium and brass versions, a dovetail groove maximizes the grout grip and edge protection for both vertical and horizontal tile laying. TRIMTEC TR profiles are conceived for tile laying, but can also be used with other types of flooring such as stone, wood and industrial resin floors. TRIMTEC TR profiles are mainly used as transition trims between two types of flooring (for example between tiling and moquetteing) and as expansion joints when two lengths are laid side by side. They can also be used as trimming for ceramic skirtings and as edge protection for any floor thickness. In some cases the profiles may be used as entrance mat framing. TRIMTEC TR Curveline: the bendable version of the TR TRIMTEC TR series is also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code. TRIMTEC TR how to install 1) Choose the trim size according to the tile thickness. The trim should be 0.5+/-1mm lower than the tile, therefore not exceeding the height of the tile. 2) Apply tile adhesive. 3) Cut the profile to required length, leaving extra space for linear expansion. The perforated flange of the trim is then firmly embedded into the adhesive and aligned. 4) Trowel an additional layer of adhesive over the perforations in the profile and in the dovetail groove of the vertical section. 5) Leave a tiny gap of approximately 0.5+/-2mm between the trim and the tile for final grouting.

TRIMTEC SR Edging perimeter profiles for ceramic floors

profilitec > Accessories

TRIMTEC SR Edging perimeter profiles for ceramic floors TRIMTEC SR is especially recommended for finishing the perimeter of ceramic floors, particularly when they abut a vertical surface. It is also used as stair nosing and trimming in balconies and exit ways. TRIMTEC SR profiles have an extended vertical edge to cover and protect border surfaces and prevent future cracking. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. The aluminium section is designed with vertical dovetail anchoring. TRIMTEC SR CURVELINE: bendable profiles TRIMTEC SR series is also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code.

BORDERTEC SBR Edging profiles for balconies and patios

profilitec > Accessories

BORDERTEC SBR Edging profiles for balconies and patios The BORDERTEC BSR is recommended for contouring marble and stone balconies and sidewalks. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. BORDERTEC BSR in size BSR 20/* can be used with PROFILITEC floating floor support systems. BORDERTEC BSR contains all necessary elements for state-of-the-art installation.

ROUNDJOLLY profiles for thin floors

profilitec > Accessories

ROUNDJOLLY profiles for thin floors ROUNDJOLLY profiles join floor types of different thicknesses, finishing and protecting the tile edge. Available in aluminium and stainless steel, this profile is ideal for renovations with thin tiles.

SQUAREJOLLY SJ: square shape trims

profilitec > Accessories

SQUAREJOLLY SJ: square shape trims Squarejolly SJ is a multipurpose aluminium profile used in laying adhesive ceramic floor and wall coverings. Its uniquely symmetrical shape lends itself to endless detailing possibilities. In the technical specs, H corresponds to the tile thickness and B = H + 1mm corresponds to the visible width of the profile. In the aluminium version, a patented internal cavity with a dovetail groove maximizes vertical grout grip and edge protection. The sectional design of the SQUAREJOLLY SJ profile provides a completely leveled surface, making it resistant to vertical loads and perfectly suitable for flooring applications. How SJ models can be used SQUAREJOLLY SJ is a multipurpose profile with a wide range of applications: • Leveled flooring intersections • Decorative accent bands • Wall tile contouring • Entrance mat framing • skirting finishing and edging • Stair nosing

COVERTEC EP: Transition trims for floors with the same height

profilitec > Accessories

COVERTEC EP: Transition trims for floors with the same height The COVERTEC EP profile joins two adjacent flooring surfaces (for example: concrete/ceramic tile, wood/ceramic tile and other resin or vinyl floor combinations). The overlapping section allows differential movement of the flooring, hides edging imperfections and prevents chipping and cracking. Available in aluminium and brass with patented dovetail anchoring.

COVERTEC SP: T shape trims for floors with the same height

profilitec > Accessories

COVERTEC SP: T shape trims for floors with the same height COVERTEC SP is a profile designed to join two adjacent existing floors at the same height but it can cover imperfections in cutting or slight variations of height to be found on a tiled floor joining to a wooden one for example. Thanks to its shape, available in 3 different widths, this profile helps floor coverings to maintain the minimum distance thus acting also as a dilatation joint.

STRIPTEC ST: Transition trims for floors with different heights (max 5mm)

profilitec > Accessories

STRIPTEC ST: Transition trims for floors with different heights (max 5mm) STRIPTEC ST profiles are designed to join adjoining floors of equal or different type and thickness. The rounded shape of this profile covers edge imperfections and allows a slight rotation, compensating for elevation differences of up to 5mm. It can also be used as a termination profile, given a floor thickness of up to 5mm. Available in two versions: self-adhesive and screw-on. STRIPTEC how to install Installation of self adhesive version: 1) Make sure the base is solid, flat, level, clean and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of the pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

STRIPTEC ST38: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC ST38: Transition trims for floors with the same heights ST38 aluminium profiles (available in the adhesive or perforated version) for transition or threshold cover with knurled surface. Slightly rounded shape. The shaped edge allows perfect contact with the floor. Used to minimize installation defects and creating expansion joints.

STRIPTEC STP: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC STP: Transition trims for floors with the same heights STP Brass profiles (available in the adhesive or perforated version) for connection or threshold cover with smooth brass surface. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

STRIPTEC STB: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC STB: Transition trims for floors with the same heights STB profiles in brass or aluminium (available in the adhesive or perforated version) for connection or threshold cover with smooth brass and aluminium grooves. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

MULTICLIP CLG Transition trims for all kind of floors

profilitec > Accessories

MULTICLIP CLG Transition trims for all kind of floors The innovative, patented MULTICLIP® CLG 370 profiles has a tilting head to adjust minor height differences up to 3mm. MULTICLIP CLG allows flooring expansion and contraction making it the perfect transition profile in between different flooring materials. You can easily increase the height by stacking up to 3 plastic rails one on top of the other. A 16mm internal cavity acts as an expansion joint, allowing 5mm of differential movement. Typically, laminate wood flooring expands about 5mm per plank due to humidity.

MULTIFIIX CLG Transitions trims for floors with the same height

profilitec > Accessories

MULTIFIIX CLG Transitions trims for floors with the same height Patented transition profile for floors at the same level, slightly rounded in anodised aluminium finish and with high resistance wood effect coating. This article has been conceived for a purely domestic environment and for Do-it-yourself use, to be fixed primarily with the nylon "MULTIFIX" plugs. MULTIFIX how to install 1. Forare con punta da 6 mm 2. Inserire gli appositi tasselli 3. Allineare i tasselli 4. Martellare in modo uniforme

MULTICOVER CLG - Transition trims for floors with the same height

profilitec > Accessories

MULTICOVER CLG - Transition trims for floors with the same height CLG transition profiles in anodised aluminium finish and with high resistance wood effect coating. The elements that make up the MULTICOVER® system fit perfectly thanks to the plastic rail and do not move once clipped together. The profiles are also available in a perforated version, for fixing with screws and plugs or self-adhesive, equipped with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective paper from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry

WOODTEC LG edging trims for wooden floors

profilitec > Accessories

WOODTEC LG edging trims for wooden floors WOODTEC LG profiles are specifically designed to join two adjoining floating wood floors. The size and shape of the profile section allows for differential movement typical of wood flooring. Its smooth top surface fits under doorways making it perfectly suitable for thresholds.

CARPETEC MG transition trims for carpet floors

profilitec > Accessories

CARPETEC MG transition trims for carpet floors Designed for carpet flooring, CARPETEC MG profiles are composed of two elements: a base track onto which the carpet is laid, and an interlocking, grooved top piece that snaps shut and compresses the carpeting.

CARPETEC MP Transition / edging trims for carpet floors

profilitec > Accessories

CARPETEC MP Transition / edging trims for carpet floors The multipurpose, grooved moquetteEC MP profiles designed to compress moquette flooring at different elevations. They may be used to join two types of moquetteing or as edge profiles.

STC Profile to cover electric cables

profilitec > Accessories

STC Profile to cover electric cables Profile used to cover electric cables. Available in the adhesive version.

CUBETEC CU: Transition trims for floors with the same height

profilitec > Accessories

CUBETEC CU: Transition trims for floors with the same height CUBETEC CU is a decorative profile that allows you to create a transition between floors of the same height or as a wall transition. The profile is characterized by the constancy of the visible dimension (8 mm) which is independent of the height of the profile. Available in polished AISI 304 stainless steel and satin steel.

CUBETEC FI: Transition trims for floors with the same height

profilitec > Accessories

CUBETEC FI: Transition trims for floors with the same height CUBETEC FI is a linear and decorative finishing element which provides long-lasting and heavy-duty tile edge protection. The CUBETEC FI profile is a decorative joint between different flooring types, trimming for ceramic tile and suitable for welcome mat framing. Two profile widths are available in polished stainless steel AISI 304.

VARIOTEC DS Transition trims to be used after flooring installation

profilitec > Accessories

VARIOTEC DS Transition trims to be used after flooring installation VARIOTEC DS is a stainless steel or brass profile for floors with differences in height from 7 to 12 mm. Supplied with adhesive on the lower side for a quick and long-lasting installation. Fitting to combine ceramic or parquet floors with lower thickness materials, such as moquettes or vinyl floors. Adhesives: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

LINETEC PR Transition trims

profilitec > Accessories

LINETEC PR Transition trims Extruded brass transition profile. Perimeter profile for wooden floors or ceramic with thickness 10 mm. They allow to solve quickly and with an excellent aesthetic result the most frequent junction situations between floors of different nature, where an appropriate connection system has not been foreseen at the time of installation.

LINETEC PQ Transition trims for floors with the same height

profilitec > Accessories

LINETEC PQ Transition trims for floors with the same height Profiles in extruded brass or stainless steel for transition between floors already installed. It fits between floors of 10 mm thick. They allow to solve quickly and with an excellent aesthetic result the most frequent transition situations between floors of different nature, where an appropriate transition system has not been foreseen at the time of installation.

LINETEC PU Transition trims for floors with the same height

profilitec > Accessories

LINETEC PU Transition trims for floors with the same height Extruded U-shaped brass profile for transition between floors already installed of 10 mm thick. It solves quickly and with an excellent aesthetic result the most frequent transition situations between floors of different nature, where an appropriate connection system has not been foreseen at the time of installation.

MULTICPLIP CLP perimetral trims that allows the flooring expansion / contraction

profilitec > Accessories

MULTICPLIP CLP perimetral trims that allows the flooring expansion / contraction The patented MULTICLIP® CLP 270 aluminium perimeter profile allows floor edge finishing without skirtings. A 16mm internal cavity allows 3/16’’ (5mm) of differential movement. This profile is also suitable along sliding door tracks and as entrance mat framing.

WOODTEC LT edging trims for wooden floors

profilitec > Accessories

WOODTEC LT edging trims for wooden floors The WOODTEC LT profiles are specifically designed for finishing the perimeter of floating wood floors, particularly when they transition to another floor type at the same elevation or abut a vertical surface. While acting as an expansion joint, they also allow floor edge finishing without skirtings. This profile is also suitable along sliding door tracks and as entrance mat framing. Installed with flathead screws.

CARPETEC MD edging tims for carpet floors

profilitec > Accessories

CARPETEC MD edging tims for carpet floors Perimeter profiles in anodised aluminium for flexible floors such as moquettes and coconut mats. The profiles, by pressing them, close, locking the edge, covering the cutting defects and preserving the edge. Available in the perforated and with hooks version to allow a better grip of the moquette.

CARPETEC MS edging tims for carpet floors

profilitec > Accessories

CARPETEC MS edging tims for carpet floors Rounded perimeter profile in anodised aluminium or brass for flexible floors such as moquetteing and coconut mats. The profiles, by pressing them, close, locking the coating in a lasting way, covering the cutting defects and preserving the edge. The profile is serrated both in the rounded part on the inside and on the surface to allow a better grip of the moquette.

ENTRYTEC BU Profiles for entrance mattings

profilitec > Accessories

ENTRYTEC BU Profiles for entrance mattings Reversible profile to create perimeters suitable for containing coconut doormats, moquettes or technical aluminium doormats. The profile, thanks to the particular shape, allows to obtain the two most common doormat thicknesses of 18 and 23 mm. The laying of the frame, which can be easily assembled with the brackets supplied, must be prepared at a height before laying the adjacent floor. The profile can also be laid with the help of modular and sliding fixing brackets inside the slots.

ROUNDTEC RD Transition trims for floors with different heights

profilitec > Accessories

ROUNDTEC RD Transition trims for floors with different heights The ROUNDTEC profile is mainly used in transitioning floor types of different thicknesses, for example from ceramic tile to thin linoleum. Its rounded section provides a smooth level change of 3mm, making it suitable between two floor types or as an end profile. ROUNDTEC can even be used as stair nosing or edging for tile countertops. Available in brass with patented dovetail anchoring.

ZEROTEC ZRM Ramp trims for floors with different heights

profilitec > Accessories

ZEROTEC ZRM Ramp trims for floors with different heights ZEROTEC ZRM profile is the ideal solution for joining two floors at different levels, between a ceramic covering and one in moquette moquetteing for instance. This trim allows a 5 mm progressive sloping difference to the next floor to match thus making safer when treading over the connecting floors. The ramp inclination has been conceived for vehicle and wheel carts transit.

ZEROTEC ZR Transition trims for floors with different heights and of different materials

profilitec > Accessories

ZEROTEC ZR Transition trims for floors with different heights and of different materials ZEROTEC ZR allows the installer to perfectly match different floor levels when laying ceramic tile or wood flooring over an existing floor. Because of the slope, ZEROTEC profiles are ideal in passage areas for hand trolley and cars, while providing edge protection resistant to vertical loads. The brass version is recommended for industrial applications in garages and shopping centers. Available in aluminium and brass with patented vertical dovetail anchoring. ZEROTEC ZR Curveline: bendable version of the Zerotec Some ZEROTEC ZR profiles are also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code.

Zerotec ZRN60 Transition trims for floors with different heights and of different materials

profilitec > Accessories

Zerotec ZRN60 Transition trims for floors with different heights and of different materials Zerotec ZRN60 has been designed to optimize transitions between different flooring materials, situation that often occurs in public environments such as hotels and restaurants. Its delicate line and its defined inclination allow to optimize the transition between different heights: from 8, 10 or 12.5 mm thick tiles to another 6 mm thick floor, giving a modern and elegant touch to the environment. The ramp length is 8.5 mm fixed for all heights. This particular design protects and hides the portion of the underlying coating (6 mm thick) from impacts and mechanical hits, preventing its possible breakage.

Zerotec ZR60 Transition trims for floors with different heights and of different materials

profilitec > Accessories

Zerotec ZR60 Transition trims for floors with different heights and of different materials Zerotec ZR60 has been designed to optimize transitions between different flooring materials; it can be typically found in public spaces, like hotels and restaurants. Its delicate line and gradual inclination allows a smooth transition between different floor levels: from 8 mm, 10 mm and 12.5 mm tile to an adjacent floor covering with a thickness of 6 mm, excellent for modern and elegant interior detailing. The profile’s unique shape hides and protects the edge of the flooring below (6 mm thickness) from mechanical impact, hiding imperfections while preventing damage caused by passage and use.

Profili RAMPTEC ZRR Ramp trims for floors with different heights

profilitec > Accessories

Profili RAMPTEC ZRR Ramp trims for floors with different heights The 20° slope of the anodised aluminium RAMPTEC ZRR profile provides a safe and progressive transition between two different floor levels. The vertical edge has a dovetailed internal cavity that maximizes grout and adhesive grip on load bearing points.

LEVELTEC RPR Transition trims to be used after flooring installation

profilitec > Accessories

LEVELTEC RPR Transition trims to be used after flooring installation LEVELTEC RPR is a model with the function of perimeter or connection profile between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wooden floors or moquetteing. LEVELTEC RPR is able to compensate for differences of 8 ÷ 14 mm. The profile is normally supplied with an adhesive with high sealing characteristics or without an adhesive.

LEVELTEC RP Transition trims to be used after flooring installation

profilitec > Accessories

LEVELTEC RP Transition trims to be used after flooring installation LEVELTEC RP is a series of profiles with a terminal or connecting function between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wood or carpet floors. The LEVELTEC RP series consists of profiles with heights between 4.5 ÷ 12.5 mm, capable of compensating for height differences of 3 ÷ 14 mm. The profile is normally supplied with adhesive of high sealing properties. They are also available in a drilled version for fixing with screws and dowels. LEVELTEC RP: transition profile in different dimensions Smooth and grooved LEVELTEC profiles in varying widths and heights transition floors of different elevations. Their sectional thickness makes them especially suitable for high traffic areas and the end detailing allows frictionless contact between the profile and floor. LEVELTEC RP how to install Installation of self-adhesive version: 1) Make sure the base is solid, flat, level, clean, and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

VARIOTEC DC Adhesive flooring profiles

profilitec > Accessories

VARIOTEC DC Adhesive flooring profiles VARIOTEC DC profiles’ innovative design elegantly rotates and adapts to match different floor elevations. By simply rotating its shape, this profile can adapt to floor thicknesses ranging from 7 to 14mm. Use our adhesive for on-site installation.

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8")

profilitec > Accessories

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8") Especially conceived for residential and light commercial use, VARIOTEC DK profiles are available in a wide range of decorative finishes. This profile series is designed to join different floor types with an elevation difference ranging from 7 to 16mm. VARIOTEC DK profiles are self-adhesive - simply cut the profile to the desired length, remove the adhesive backing and press uniformly downwards on to the profile to install. Always make sure the base is solid, flat, level, clean and dry.

VARIOTEC DR Transition trims to be used after flooring installation

profilitec > Accessories

VARIOTEC DR Transition trims to be used after flooring installation VARIOTEC DR are stainless steel or brass profiles used as a transition between already installed floors of different nature and level. Self-adhesive: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

STAIRTEC AE ribbed aluminium or brass stairnosing trims

profilitec > Accessories

STAIRTEC AE ribbed aluminium or brass stairnosing trims STAIRTEC AE profiles offer a practical solution to common challenges faced with step treads, such as chipping along vulnerable step edges. The 90° section hides edge imperfections, conceals the riser edge and prevents future cracking while acting as a design element of the staircase. The profile must be fastened with flathead screws.

STAIRTEC SM Stair nosing trims for low thickness floors

profilitec > Accessories

STAIRTEC SM Stair nosing trims for low thickness floors STAIRTEC SM is a stair nosing profile made in aluminium or brass with an anti-skid rubber grooved or flat smooth insert. It is truly ideal for protection and as a safety measure of stair steps with moquette or rubber covering.

QUADRI CRIQM221 - Countertop single handle washbasin mixer _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The Quadri CRIQM221 is a single-control, single-hole deck-mounted washbasin mixer featuring mechanical mixing and a 1" 1/4 pop-up waste, available in a sleek Chrome Black matt finish. This design exemplifies clean, rational aesthetics with geometric lines and flat surfaces that evoke a sense of modern sophistication. A 3D file of the product is available for download, offering designers and architects the flexibility to integrate it seamlessly into their projects. Manufactured by CRISTINA Rubinetterie, a renowned Italian brand established in 1949, the Quadri CRIQM221 reflects the company’s commitment to blending cutting-edge technology with timeless elegance, making it a trusted choice for luxury and contemporary spaces worldwide.

QUADRI CRIQM401 - 2 hole external single handle shower mixer _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The Quadri CRIQM401 is a sleek, single-control wall-mounted external shower mixer featuring mechanical mixing, designed for both functionality and aesthetic appeal. Its clean, geometric lines and flat surfaces exude a sense of rationality and stylistic purity, enhanced by a striking Chrome Black matt finish. This product is part of the QUADRI collection by CRISTINA Rubinetterie, an Italian leader in high-quality faucets and bathroom accessories since 1949, renowned for blending cutting-edge technology with timeless elegance. A 3D file of the product is available for download, allowing for seamless integration into design projects.

QUADRI CRIQM602 - Bathtub tap / shower tap _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The Quadri CRIQM602 is a sleek, single-control wall-mounted external set designed for showers and bathtubs, featuring a durable metal plate, mechanical mixing, a diverter with two outlets, a fixed support, a water outlet, and a long-life hose. This elegant fixture, available in a sophisticated Chrome Black Matt finish, is designed to pair seamlessly with the recessed parts CRICS100 (RH) or CRICS101 (LH). Its clean, geometric lines and flat surfaces embody a minimalist yet emotionally impactful design, making it a perfect addition to modern bathrooms. A 3D file of the product is available for download, allowing for precise planning and integration into your space. Cristina Rubinetterie, an Italian leader in high-quality faucets and bathroom accessories since 1949, combines cutting-edge technology with timeless elegance, offering luxurious and durable solutions for residential, hospitality, and wellness projects.

QUADRI CRIQM611 - Bathtub tap / shower tap _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The Quadri CRIQM611 is a horizontal single-control wall-mounted shower and bathtub mixer, featuring a sleek metal plate, mechanical mixing, and a diverter with three outlets, complete with a recessed part for a seamless installation. Available in a sophisticated Chrome Black matt finish, this mixer embodies Quadri's clean design philosophy, characterized by rationality and stylistic purity, enhanced by its brilliant flat surfaces and geometric lines. For added convenience, a 3D file of the product is available for download, allowing for precise planning and integration into your design project. Cristina Rubinetterie, the esteemed Italian manufacturer behind this product, has been a leader in high-quality faucet design and production since 1949, blending cutting-edge technology with timeless elegance to create luxurious and durable solutions for bathrooms, kitchens, and beyond.

SANDWICH CRIPD008 - Ceiling mounted overhead shower with anti-lime system _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Shower

The **Anti-limestone "SANDWICH PLUS" showerhead** (60x60 cm) combines innovative design and patented technology to deliver a luxurious showering experience. Crafted from ultra-thin steel sheets layered to a total thickness of just 4 mm, this showerhead operates efficiently even at low water pressure, offering a cascading waterfall effect while conserving water. Its sleek, modern design seamlessly complements contemporary and elegant interiors, making it a perfect addition to any sophisticated bathroom. A 3D file of the product is available for download, allowing for precise planning and integration into your space. **CRISTINA Rubinetterie**, the Italian manufacturer behind this product, has been a leader in high-quality faucets and bathroom accessories since 1949, renowned for blending cutting-edge technology with timeless elegance.

TRICOLORE VERDE CRITV129 - Deck mounted single handle bathtub tap with plate _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **Tricolore Verde CRITV129** is a sleek, inspectable single-control deck-mounted bath edge mixer featuring a chrome finish, mechanical mixing, and an automatic diverter with two outlets, complete with a recessed part. Designed with clean geometric lines, this mixer embodies high-tech sophistication and minimalist elegance, making it a modern classic suitable for any washbasin. The Tricolore Verde series is available in various heights and incorporates advanced technologies, offering versatility and timeless appeal. A 3D file of the product is available for download, allowing for seamless integration into design projects. **CRISTINA Rubinetterie**, a renowned Italian brand established in 1949, is celebrated for its innovative designs and premium-quality faucets, blending cutting-edge technology with timeless elegance to cater to luxury residential, hospitality, and wellness projects worldwide.

TRICOLORE VERDE CRITV224 - Single handle washbasin mixer _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **Tricolore Verde CRITV224** is a sleek, single-control, 2-hole deck-mounted washbasin mixer featuring relocatable mechanical side mixing and a 1" 1/4 U&D* drain. Designed with simple geometric lines, this mixer exudes sophisticated high-tech elegance, embodying a modern classic aesthetic by eliminating the superfluous and focusing on the essential. Available in a variety of finishes, including white matt, polished black chrome, brushed gold brass, and more, the Tricolore Verde series is versatile and compatible with all types of washbasins. Enhanced with advanced technologies and offered in different heights, this product is a perfect blend of functionality and style. A downloadable 3D file of the product is also available for design and planning purposes. **CRISTINA Rubinetterie**, the Italian manufacturer behind this product, has been a leader in high-quality faucet design since 1949, renowned for combining cutting-edge technology with timeless elegance in their bathroom, kitchen, and outdoor solutions.

TRICOLORE VERDE CRITV241 - Countertop single handle washbasin mixer without waste _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **Tricolore Verde CRITV241** is a single-hole, deck-mounted 1/2" tap designed for pre-mixed water, featuring a sleek and modern aesthetic with no drain. Available in a variety of sophisticated finishes, including white matt, polished black chrome, brushed black chrome, PVD brushed gold brass, brushed metallic, black matt, yellow gold oro, PVD polished rose gold, PVD brushed rose gold, and brushed old brass, this tap combines high-tech elegance with minimalist design. Its simple geometric lines and focus on essential functionality make it a versatile and timeless addition to any washbasin, with options for different heights and advanced technologies. A 3D file of the product is also available for download, allowing for seamless integration into design projects. **CRISTINA Rubinetterie**, a renowned Italian manufacturer established in 1949, is celebrated for its innovative and luxurious faucets, blending cutting-edge technology with timeless design to create products that are both functional and aesthetically stunning.

TRICOLORE VERDE CRITV256 - Wall-mounted single handle washbasin mixer with plate _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **Tricolore Verde CRITV256** is a sleek, wall-mounted external faucet set designed for washbasins, featuring a single-control mechanism, a 180 mm spout, and a 1" 1/4 U&D* drain. Crafted with a mechanical mixing system and a metal plate, it pairs seamlessly with the recessed parts CRICS200 (RH) or CRICS201 (LH). Available in a variety of premium finishes, including White Matt, Chrome, Polished Black Chrome, Brushed Gold Brass, and more, this collection embodies minimalist sophistication with its clean geometric lines, making it a modern classic suitable for any washbasin type. A 3D file of the product is available for download, offering designers and architects the flexibility to integrate it into their projects with precision. **CRISTINA Rubinetterie**, an Italian leader in luxury faucet design since 1949, combines cutting-edge technology with timeless elegance, offering high-quality solutions for bathrooms, kitchens, and wellness spaces.

TRICOLORE VERDE CRITV290 - Floor standing washbasin mixer _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **Tricolore Verde CRITV290** is a single-control, floor-standing external faucet set designed for single-hole washbasins, featuring mechanical mixing and a 1" 1/4 U&D* drain. This elegant fixture is complemented by the recessed part CRICS290 and is available in a variety of sophisticated finishes, including white matt, polished chrome, brushed black chrome, PVD brushed gold brass, brushed metallic, black matt, yellow gold oro, PVD polished rose gold, PVD brushed rose gold, and brushed old brass. Characterized by its clean geometric lines and high-tech elegance, the Tricolore Verde series embodies a modern classic aesthetic, eliminating the superfluous to focus on the essential. It is available in multiple heights and incorporates advanced technologies, making it a versatile and luxurious choice for any washbasin. A 3D file of the product is available for download, allowing for seamless integration into design projects. **CRISTINA Rubinetterie**, an Italian leader in high-quality faucet design and manufacturing since 1949, combines cutting-edge technology with timeless elegance, offering premium solutions for bathrooms, kitchens, wellness centers, and outdoor spaces.

IMPERO CRIIM101 - Wall-mounted bathtub mixer with hand shower _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **Impero CRIIM101** is a dual-control, wall-mounted external bath mixer that combines mechanical mixing with a diverter featuring two outlets, a 147 mm spout, an adjustable support, an anti-scale mini showerhead, and a hose. Available in elegant finishes such as Chrome, Yellow Gold Oro, and Brushed Old Brass, this product seamlessly blends traditional aesthetics with modern functionality, offering a nostalgic yet contemporary design for the bathroom. A 3D file of the product is available for download, allowing for detailed visualization and planning. Crafted by **CRISTINA Rubinetterie**, a renowned Italian manufacturer established in 1949, this product reflects the brand’s commitment to merging timeless elegance with cutting-edge technology. Known for its high-quality faucets and accessories, CRISTINA Rubinetterie has become a symbol of luxury and innovation in bathroom and kitchen design, offering solutions that cater to both residential and commercial projects.

IMPERO CRIIM114 - 3 hole shower mixer with diverter _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **Impero CRIIM114** is a dual-control, wall-mounted 3-hole shower and bathtub mixer featuring mechanical mixing and a diverter with two outlets, complete with a recessed part. Available in elegant finishes such as Chrome, Yellow Gold Oro, and Brushed Old Brass, this mixer combines traditional aesthetics with modern functionality, offering a nostalgic yet contemporary design that seamlessly fits into any bathroom. A 3D file of the product is available for download, allowing for precise planning and integration into your space. Crafted by **CRISTINA Rubinetterie**, a renowned Italian manufacturer established in 1949, the product reflects the brand’s commitment to blending timeless elegance with cutting-edge technology, making it a trusted choice for luxury and design-focused projects worldwide.

CRIXT833 - Side shower with anti-lime system _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Shower

The **CRIXT833** is an anti-lime body jet external component designed for use with CRICS705, CRICS706, and CRICS707 models, featuring a durable metal plate and available in a wide range of finishes, including Matte White, Chrome, Black Polished Chrome, Black Brushed Chrome, Gold Brass Polished PVD, Gold Brass Brushed PVD, Brushed Metallic, Matt Black, PVD Polished Rose Gold, PVD Brushed Rose Gold, Brushed Antique Brass, and Alux. A 3D file of the product is also available for download, offering added convenience for design and installation planning. Manufactured by **CRISTINA Rubinetterie**, a renowned Italian brand established in 1949, the company is celebrated for its fusion of cutting-edge technology, timeless elegance, and sustainable practices, producing high-quality faucets and bathroom accessories that cater to luxury residential, hospitality, and wellness projects worldwide.

3-WAY OUT THERMOSTATIC SELECTORS 67600E - Thermostatic 4 hole shower mixer _ newform

newform > Tap

**ART. 67600E - Multifunction 3-Way Out Thermostatic (External Part):** This versatile thermostatic selector offers three-way functionality, designed for precise temperature control and efficient water distribution in modern bathroom and kitchen setups. The product is part of Newform's innovative range of fixtures, known for their sleek design and advanced features. A downloadable 3D file of the product is available for detailed visualization and integration into design projects. **Supplier Description:** Newform, an Italian interior design leader since 1983, specializes in crafting high-quality, stylish bathroom and kitchen fixtures, blending functionality with minimalist aesthetics for both residential and commercial spaces.

SHIRÒ - Wall-mounted waterfall shower _ ZAZZERI

ZAZZERI > Shower

The Shirò shower collection embodies contemporary metropolitan elegance, offering a versatile and innovative design that caters to both architects and discerning customers, allowing ample room for creative customization. The collection features a rectangular showerhead, the centerpiece of the line, which seamlessly blends the traditional rain effect with a modern waterfall flow emerging from a sleek slit. Wall-mounted options deliver a striking cascade experience, while square showerheads are available in various configurations, including rainfall, rainfall with cascade, and rainfall with RGB LED lighting. The collection is rounded out by side and corner showers, ensuring water jets can be precisely positioned for a tailored experience. Crafted from chrome-finished brass and stainless steel, all pieces are equipped with silicone anti-limescale nozzles for durability and ease of maintenance. A 3D file of the product is available for download, enabling seamless integration into design plans. ZAZZERI, the esteemed Italian supplier behind this collection, has been a pioneer in luxury bathroom and kitchen fixtures since 1929, renowned for its innovative designs, premium materials, and timeless craftsmanship, making it a trusted choice for high-end residential and commercial projects worldwide.

D-Code Spare roll holder

duravit > Accessories

Design by sieger design

D-Code Soap dispenser

duravit > Accessories

Type of mounting: Wall-mounted Design by sieger design

D-Code Towel shelf

duravit > Accessories

Design by sieger design

D-Code Toilet paper holder

duravit > Accessories

Design by sieger design

Starck T Glass holder

duravit > Accessories

Accent colour: White Matt, Glass, Brass, Type of mounting: Wall-mounted, Position toothbrush holder: Right, Left Design by Philippe Starck

Karree Soap dispenser

duravit > Accessories

Chrome, Type of mounting: Wall-mounted Design by Duravit

Universal Towel rail

duravit > Accessories