SANITEC SB 12 Cove trim - 2d files - 3d files

TRIMTEC TR: multipurpose profiles in different materials

profilitec > Accessories

TRIMTEC TR: multipurpose profiles in different materials TRIMTEC TR is a complete range of brass, aluminium and stainless steel trim profiles designed for fast and efficient installation of any flooring type, regardless of size and thickness. TRIMTEC TR is available in various heights from 2 to 30 mm, matching different tile thicknesses. In the aluminium and brass versions, a dovetail groove maximizes the grout grip and edge protection for both vertical and horizontal tile laying. TRIMTEC TR profiles are conceived for tile laying, but can also be used with other types of flooring such as stone, wood and industrial resin floors. TRIMTEC TR profiles are mainly used as transition trims between two types of flooring (for example between tiling and moquetteing) and as expansion joints when two lengths are laid side by side. They can also be used as trimming for ceramic skirtings and as edge protection for any floor thickness. In some cases the profiles may be used as entrance mat framing. TRIMTEC TR Curveline: the bendable version of the TR TRIMTEC TR series is also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code. TRIMTEC TR how to install 1) Choose the trim size according to the tile thickness. The trim should be 0.5+/-1mm lower than the tile, therefore not exceeding the height of the tile. 2) Apply tile adhesive. 3) Cut the profile to required length, leaving extra space for linear expansion. The perforated flange of the trim is then firmly embedded into the adhesive and aligned. 4) Trowel an additional layer of adhesive over the perforations in the profile and in the dovetail groove of the vertical section. 5) Leave a tiny gap of approximately 0.5+/-2mm between the trim and the tile for final grouting.

TRIMTEC SR Edging perimeter profiles for ceramic floors

profilitec > Accessories

TRIMTEC SR Edging perimeter profiles for ceramic floors TRIMTEC SR is especially recommended for finishing the perimeter of ceramic floors, particularly when they abut a vertical surface. It is also used as stair nosing and trimming in balconies and exit ways. TRIMTEC SR profiles have an extended vertical edge to cover and protect border surfaces and prevent future cracking. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. The aluminium section is designed with vertical dovetail anchoring. TRIMTEC SR CURVELINE: bendable profiles TRIMTEC SR series is also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code.

BORDERTEC SBR Edging profiles for balconies and patios

profilitec > Accessories

BORDERTEC SBR Edging profiles for balconies and patios The BORDERTEC BSR is recommended for contouring marble and stone balconies and sidewalks. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. BORDERTEC BSR in size BSR 20/* can be used with PROFILITEC floating floor support systems. BORDERTEC BSR contains all necessary elements for state-of-the-art installation.

ROUNDJOLLY profiles for thin floors

profilitec > Accessories

ROUNDJOLLY profiles for thin floors ROUNDJOLLY profiles join floor types of different thicknesses, finishing and protecting the tile edge. Available in aluminium and stainless steel, this profile is ideal for renovations with thin tiles.

SQUAREJOLLY SJ: square shape trims

profilitec > Accessories

SQUAREJOLLY SJ: square shape trims Squarejolly SJ is a multipurpose aluminium profile used in laying adhesive ceramic floor and wall coverings. Its uniquely symmetrical shape lends itself to endless detailing possibilities. In the technical specs, H corresponds to the tile thickness and B = H + 1mm corresponds to the visible width of the profile. In the aluminium version, a patented internal cavity with a dovetail groove maximizes vertical grout grip and edge protection. The sectional design of the SQUAREJOLLY SJ profile provides a completely leveled surface, making it resistant to vertical loads and perfectly suitable for flooring applications. How SJ models can be used SQUAREJOLLY SJ is a multipurpose profile with a wide range of applications: • Leveled flooring intersections • Decorative accent bands • Wall tile contouring • Entrance mat framing • skirting finishing and edging • Stair nosing

COVERTEC EP: Transition trims for floors with the same height

profilitec > Accessories

COVERTEC EP: Transition trims for floors with the same height The COVERTEC EP profile joins two adjacent flooring surfaces (for example: concrete/ceramic tile, wood/ceramic tile and other resin or vinyl floor combinations). The overlapping section allows differential movement of the flooring, hides edging imperfections and prevents chipping and cracking. Available in aluminium and brass with patented dovetail anchoring.

COVERTEC SP: T shape trims for floors with the same height

profilitec > Accessories

COVERTEC SP: T shape trims for floors with the same height COVERTEC SP is a profile designed to join two adjacent existing floors at the same height but it can cover imperfections in cutting or slight variations of height to be found on a tiled floor joining to a wooden one for example. Thanks to its shape, available in 3 different widths, this profile helps floor coverings to maintain the minimum distance thus acting also as a dilatation joint.

STRIPTEC ST: Transition trims for floors with different heights (max 5mm)

profilitec > Accessories

STRIPTEC ST: Transition trims for floors with different heights (max 5mm) STRIPTEC ST profiles are designed to join adjoining floors of equal or different type and thickness. The rounded shape of this profile covers edge imperfections and allows a slight rotation, compensating for elevation differences of up to 5mm. It can also be used as a termination profile, given a floor thickness of up to 5mm. Available in two versions: self-adhesive and screw-on. STRIPTEC how to install Installation of self adhesive version: 1) Make sure the base is solid, flat, level, clean and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of the pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

STRIPTEC ST38: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC ST38: Transition trims for floors with the same heights ST38 aluminium profiles (available in the adhesive or perforated version) for transition or threshold cover with knurled surface. Slightly rounded shape. The shaped edge allows perfect contact with the floor. Used to minimize installation defects and creating expansion joints.

STRIPTEC STP: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC STP: Transition trims for floors with the same heights STP Brass profiles (available in the adhesive or perforated version) for connection or threshold cover with smooth brass surface. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

STRIPTEC STB: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC STB: Transition trims for floors with the same heights STB profiles in brass or aluminium (available in the adhesive or perforated version) for connection or threshold cover with smooth brass and aluminium grooves. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

MULTICLIP CLG Transition trims for all kind of floors

profilitec > Accessories

MULTICLIP CLG Transition trims for all kind of floors The innovative, patented MULTICLIP® CLG 370 profiles has a tilting head to adjust minor height differences up to 3mm. MULTICLIP CLG allows flooring expansion and contraction making it the perfect transition profile in between different flooring materials. You can easily increase the height by stacking up to 3 plastic rails one on top of the other. A 16mm internal cavity acts as an expansion joint, allowing 5mm of differential movement. Typically, laminate wood flooring expands about 5mm per plank due to humidity.

MULTIFIIX CLG Transitions trims for floors with the same height

profilitec > Accessories

MULTIFIIX CLG Transitions trims for floors with the same height Patented transition profile for floors at the same level, slightly rounded in anodised aluminium finish and with high resistance wood effect coating. This article has been conceived for a purely domestic environment and for Do-it-yourself use, to be fixed primarily with the nylon "MULTIFIX" plugs. MULTIFIX how to install 1. Forare con punta da 6 mm 2. Inserire gli appositi tasselli 3. Allineare i tasselli 4. Martellare in modo uniforme

MULTICOVER CLG - Transition trims for floors with the same height

profilitec > Accessories

MULTICOVER CLG - Transition trims for floors with the same height CLG transition profiles in anodised aluminium finish and with high resistance wood effect coating. The elements that make up the MULTICOVER® system fit perfectly thanks to the plastic rail and do not move once clipped together. The profiles are also available in a perforated version, for fixing with screws and plugs or self-adhesive, equipped with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective paper from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry

WOODTEC LG edging trims for wooden floors

profilitec > Accessories

WOODTEC LG edging trims for wooden floors WOODTEC LG profiles are specifically designed to join two adjoining floating wood floors. The size and shape of the profile section allows for differential movement typical of wood flooring. Its smooth top surface fits under doorways making it perfectly suitable for thresholds.

CARPETEC MG transition trims for carpet floors

profilitec > Accessories

CARPETEC MG transition trims for carpet floors Designed for carpet flooring, CARPETEC MG profiles are composed of two elements: a base track onto which the carpet is laid, and an interlocking, grooved top piece that snaps shut and compresses the carpeting.

CARPETEC MP Transition / edging trims for carpet floors

profilitec > Accessories

CARPETEC MP Transition / edging trims for carpet floors The multipurpose, grooved moquetteEC MP profiles designed to compress moquette flooring at different elevations. They may be used to join two types of moquetteing or as edge profiles.

STC Profile to cover electric cables

profilitec > Accessories

STC Profile to cover electric cables Profile used to cover electric cables. Available in the adhesive version.

CUBETEC CU: Transition trims for floors with the same height

profilitec > Accessories

CUBETEC CU: Transition trims for floors with the same height CUBETEC CU is a decorative profile that allows you to create a transition between floors of the same height or as a wall transition. The profile is characterized by the constancy of the visible dimension (8 mm) which is independent of the height of the profile. Available in polished AISI 304 stainless steel and satin steel.

CUBETEC FI: Transition trims for floors with the same height

profilitec > Accessories

CUBETEC FI: Transition trims for floors with the same height CUBETEC FI is a linear and decorative finishing element which provides long-lasting and heavy-duty tile edge protection. The CUBETEC FI profile is a decorative joint between different flooring types, trimming for ceramic tile and suitable for welcome mat framing. Two profile widths are available in polished stainless steel AISI 304.

VARIOTEC DS Transition trims to be used after flooring installation

profilitec > Accessories

VARIOTEC DS Transition trims to be used after flooring installation VARIOTEC DS is a stainless steel or brass profile for floors with differences in height from 7 to 12 mm. Supplied with adhesive on the lower side for a quick and long-lasting installation. Fitting to combine ceramic or parquet floors with lower thickness materials, such as moquettes or vinyl floors. Adhesives: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

LINETEC PR Transition trims

profilitec > Accessories

LINETEC PR Transition trims Extruded brass transition profile. Perimeter profile for wooden floors or ceramic with thickness 10 mm. They allow to solve quickly and with an excellent aesthetic result the most frequent junction situations between floors of different nature, where an appropriate connection system has not been foreseen at the time of installation.

LINETEC PQ Transition trims for floors with the same height

profilitec > Accessories

LINETEC PQ Transition trims for floors with the same height Profiles in extruded brass or stainless steel for transition between floors already installed. It fits between floors of 10 mm thick. They allow to solve quickly and with an excellent aesthetic result the most frequent transition situations between floors of different nature, where an appropriate transition system has not been foreseen at the time of installation.

LINETEC PU Transition trims for floors with the same height

profilitec > Accessories

LINETEC PU Transition trims for floors with the same height Extruded U-shaped brass profile for transition between floors already installed of 10 mm thick. It solves quickly and with an excellent aesthetic result the most frequent transition situations between floors of different nature, where an appropriate connection system has not been foreseen at the time of installation.

MULTICPLIP CLP perimetral trims that allows the flooring expansion / contraction

profilitec > Accessories

MULTICPLIP CLP perimetral trims that allows the flooring expansion / contraction The patented MULTICLIP® CLP 270 aluminium perimeter profile allows floor edge finishing without skirtings. A 16mm internal cavity allows 3/16’’ (5mm) of differential movement. This profile is also suitable along sliding door tracks and as entrance mat framing.

WOODTEC LT edging trims for wooden floors

profilitec > Accessories

WOODTEC LT edging trims for wooden floors The WOODTEC LT profiles are specifically designed for finishing the perimeter of floating wood floors, particularly when they transition to another floor type at the same elevation or abut a vertical surface. While acting as an expansion joint, they also allow floor edge finishing without skirtings. This profile is also suitable along sliding door tracks and as entrance mat framing. Installed with flathead screws.

CARPETEC MD edging tims for carpet floors

profilitec > Accessories

CARPETEC MD edging tims for carpet floors Perimeter profiles in anodised aluminium for flexible floors such as moquettes and coconut mats. The profiles, by pressing them, close, locking the edge, covering the cutting defects and preserving the edge. Available in the perforated and with hooks version to allow a better grip of the moquette.

CARPETEC MS edging tims for carpet floors

profilitec > Accessories

CARPETEC MS edging tims for carpet floors Rounded perimeter profile in anodised aluminium or brass for flexible floors such as moquetteing and coconut mats. The profiles, by pressing them, close, locking the coating in a lasting way, covering the cutting defects and preserving the edge. The profile is serrated both in the rounded part on the inside and on the surface to allow a better grip of the moquette.

ENTRYTEC BU Profiles for entrance mattings

profilitec > Accessories

ENTRYTEC BU Profiles for entrance mattings Reversible profile to create perimeters suitable for containing coconut doormats, moquettes or technical aluminium doormats. The profile, thanks to the particular shape, allows to obtain the two most common doormat thicknesses of 18 and 23 mm. The laying of the frame, which can be easily assembled with the brackets supplied, must be prepared at a height before laying the adjacent floor. The profile can also be laid with the help of modular and sliding fixing brackets inside the slots.

ROUNDTEC RD Transition trims for floors with different heights

profilitec > Accessories

ROUNDTEC RD Transition trims for floors with different heights The ROUNDTEC profile is mainly used in transitioning floor types of different thicknesses, for example from ceramic tile to thin linoleum. Its rounded section provides a smooth level change of 3mm, making it suitable between two floor types or as an end profile. ROUNDTEC can even be used as stair nosing or edging for tile countertops. Available in brass with patented dovetail anchoring.

ZEROTEC ZRM Ramp trims for floors with different heights

profilitec > Accessories

ZEROTEC ZRM Ramp trims for floors with different heights ZEROTEC ZRM profile is the ideal solution for joining two floors at different levels, between a ceramic covering and one in moquette moquetteing for instance. This trim allows a 5 mm progressive sloping difference to the next floor to match thus making safer when treading over the connecting floors. The ramp inclination has been conceived for vehicle and wheel carts transit.

ZEROTEC ZR Transition trims for floors with different heights and of different materials

profilitec > Accessories

ZEROTEC ZR Transition trims for floors with different heights and of different materials ZEROTEC ZR allows the installer to perfectly match different floor levels when laying ceramic tile or wood flooring over an existing floor. Because of the slope, ZEROTEC profiles are ideal in passage areas for hand trolley and cars, while providing edge protection resistant to vertical loads. The brass version is recommended for industrial applications in garages and shopping centers. Available in aluminium and brass with patented vertical dovetail anchoring. ZEROTEC ZR Curveline: bendable version of the Zerotec Some ZEROTEC ZR profiles are also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code.

Zerotec ZRN60 Transition trims for floors with different heights and of different materials

profilitec > Accessories

Zerotec ZRN60 Transition trims for floors with different heights and of different materials Zerotec ZRN60 has been designed to optimize transitions between different flooring materials, situation that often occurs in public environments such as hotels and restaurants. Its delicate line and its defined inclination allow to optimize the transition between different heights: from 8, 10 or 12.5 mm thick tiles to another 6 mm thick floor, giving a modern and elegant touch to the environment. The ramp length is 8.5 mm fixed for all heights. This particular design protects and hides the portion of the underlying coating (6 mm thick) from impacts and mechanical hits, preventing its possible breakage.

Zerotec ZR60 Transition trims for floors with different heights and of different materials

profilitec > Accessories

Zerotec ZR60 Transition trims for floors with different heights and of different materials Zerotec ZR60 has been designed to optimize transitions between different flooring materials; it can be typically found in public spaces, like hotels and restaurants. Its delicate line and gradual inclination allows a smooth transition between different floor levels: from 8 mm, 10 mm and 12.5 mm tile to an adjacent floor covering with a thickness of 6 mm, excellent for modern and elegant interior detailing. The profile’s unique shape hides and protects the edge of the flooring below (6 mm thickness) from mechanical impact, hiding imperfections while preventing damage caused by passage and use.

Profili RAMPTEC ZRR Ramp trims for floors with different heights

profilitec > Accessories

Profili RAMPTEC ZRR Ramp trims for floors with different heights The 20° slope of the anodised aluminium RAMPTEC ZRR profile provides a safe and progressive transition between two different floor levels. The vertical edge has a dovetailed internal cavity that maximizes grout and adhesive grip on load bearing points.

LEVELTEC RPR Transition trims to be used after flooring installation

profilitec > Accessories

LEVELTEC RPR Transition trims to be used after flooring installation LEVELTEC RPR is a model with the function of perimeter or connection profile between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wooden floors or moquetteing. LEVELTEC RPR is able to compensate for differences of 8 ÷ 14 mm. The profile is normally supplied with an adhesive with high sealing characteristics or without an adhesive.

LEVELTEC RP Transition trims to be used after flooring installation

profilitec > Accessories

LEVELTEC RP Transition trims to be used after flooring installation LEVELTEC RP is a series of profiles with a terminal or connecting function between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wood or carpet floors. The LEVELTEC RP series consists of profiles with heights between 4.5 ÷ 12.5 mm, capable of compensating for height differences of 3 ÷ 14 mm. The profile is normally supplied with adhesive of high sealing properties. They are also available in a drilled version for fixing with screws and dowels. LEVELTEC RP: transition profile in different dimensions Smooth and grooved LEVELTEC profiles in varying widths and heights transition floors of different elevations. Their sectional thickness makes them especially suitable for high traffic areas and the end detailing allows frictionless contact between the profile and floor. LEVELTEC RP how to install Installation of self-adhesive version: 1) Make sure the base is solid, flat, level, clean, and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

VARIOTEC DC Adhesive flooring profiles

profilitec > Accessories

VARIOTEC DC Adhesive flooring profiles VARIOTEC DC profiles’ innovative design elegantly rotates and adapts to match different floor elevations. By simply rotating its shape, this profile can adapt to floor thicknesses ranging from 7 to 14mm. Use our adhesive for on-site installation.

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8")

profilitec > Accessories

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8") Especially conceived for residential and light commercial use, VARIOTEC DK profiles are available in a wide range of decorative finishes. This profile series is designed to join different floor types with an elevation difference ranging from 7 to 16mm. VARIOTEC DK profiles are self-adhesive - simply cut the profile to the desired length, remove the adhesive backing and press uniformly downwards on to the profile to install. Always make sure the base is solid, flat, level, clean and dry.

VARIOTEC DR Transition trims to be used after flooring installation

profilitec > Accessories

VARIOTEC DR Transition trims to be used after flooring installation VARIOTEC DR are stainless steel or brass profiles used as a transition between already installed floors of different nature and level. Self-adhesive: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

PP level DUO MAXI - Head for decking

profilpas > Accessories

STRIPTEC STB: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC STB: Transition trims for floors with the same heights STB profiles in brass or aluminium (available in the adhesive or perforated version) for connection or threshold cover with smooth brass and aluminium grooves. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

SANITEC SB 20 Cove trim

profilitec > Accessories

SANITEC SB 20 Cove trim Hygienic cove shaped profiles between wall and wall and between wall and floor. Connections between the wall and the bathtub, the shower tray or the kitchen surface. The silicones that are normally used lose their anti-mold properties after a few months producing halos or stains. SB20 is an anodised or painted aluminium profile also available in the self-adhesive version or easily applicable with silicone on the coverings. Improve or restore the appearance of the corners, making them more hygienic.

SANITEC SB 12 Cove trim

profilitec > Accessories

SANITEC SB 12 Cove trim SANITEC SB 12 profiles resolve wall-to-wall or wall-to-floor transitions. The cove-shaped profile is easy to clean and offers a hygienic solution to internal corners in kitchen countertops, shower stalls and bathtubs, replacing silicone caulking that inevitably yellows and absorbs dirt over time.

SLAB - Wooden writing desk _ Tom Dixon

Tom Dixon > Desk

The Slab Desk is a striking piece from a collection of robust, angular furniture that exudes inviting simplicity, crafted in Lithuania using solid oak to highlight the wood's natural beauty. Its surface is deeply brushed to accentuate the grain, offering a tactile and visually rich experience. Inspired by the archetypal Victorian school desk, this contemporary workstation seamlessly transitions between roles, whether as a hotel room desk, a home office centerpiece, or an elegant dressing table. Available in Natural, Brown, and Black finishes, the Slab Desk is a versatile addition to modern interiors. A 3D file of the product is available for download, allowing for detailed visualization and planning. Designed by Tom Dixon, a renowned British brand celebrated for its innovative and modern interior design products, the company combines cutting-edge aesthetics with high-quality materials like copper, brass, and marble, catering to residential, commercial, and hospitality spaces worldwide.

HYANNIS PORT - Highboard with doors _ Ligne Roset

Ligne Roset > Cabinet

The Hyannis Port is a sleek lacquered plywood sideboard featuring hinged doors, part of a collection that exudes a handcrafted, 'cabinet-made' aesthetic. Its multi-ply frame is finished in a glossy white lacquer, with distinctive rounded rear corners that define the collection. The piece is accentuated by brilliant chrome handles and a sturdy metal underframe, while its drawer runners are equipped with smooth, controlled automatic closing for added convenience. A 3D file of the product is available for download, allowing for detailed visualization and planning. Crafted by Ligne Roset, a renowned French furniture manufacturer established in 1860, the Hyannis Port reflects the brand's commitment to modern, high-quality design, blending functionality with striking aesthetics. Ligne Roset’s global presence and innovative collaborations with top designers ensure their pieces remain timeless and versatile for both residential and commercial spaces.

OMEGA OM2P - Corner shower cabin with hinged door _ DISENIA

DISENIA > Shower

The OMEGA shower enclosure, available in alcove and two-sided versions, features sleek 6mm thick glass panels, offering a contemporary and elegant solution for modern bathrooms. Designed for alcove or corner installations, OMEGA combines clean lines and premium materials to create a luxurious and functional space, celebrating the intimacy of the most personal room in the home. A 3D file of the product is available for download, allowing for seamless integration into design plans. Manufactured by DISENIA, a renowned Italian supplier specializing in high-end bathroom and kitchen products, OMEGA reflects the brand’s commitment to innovative design, superior craftsmanship, and timeless elegance, making it a preferred choice for luxury residential and commercial projects worldwide.

FOIL CRIFL189 - Floor standing single handle bathtub mixer with hand shower _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **FOIL CRIFL189** is a single-control, floor-standing external bathtub set featuring mechanical mixing, a spout, and an anti-scale mini showerhead with independent mechanical mixing and a durable long-life hose. Designed to pair with the recessed part CRICS290, this elegant fixture is available in a variety of premium finishes, including polished chrome, brushed black chrome, PVD polished gold brass, brushed metallic, matte black, and PVD rose gold in both polished and brushed variants. Designed by Marco Pisati in 2021, the FOIL series reinterprets the classic cylindrical tap with dynamic, aerodynamically inspired curves, drawing inspiration from 1930s Streamline style and 1950s-1960s car designs. The tap’s unique dual-curvature body and spout create a soft, semi-elliptical radius, while the diagonally stretched lever ensures ease of use. With a water-saving aerator (5l/m) and user-friendly maintenance features, the FOIL CRIFL189 combines modern functionality with timeless elegance. A 3D file of the product is available for download, making it easier for designers and architects to integrate this piece into their projects. **CRISTINA Rubinetterie**, an Italian leader in luxury faucet design since 1949, is renowned for blending cutting-edge technology with timeless elegance, offering high-quality solutions for bathrooms, kitchens, and wellness spaces.

EAST SIDE CRIES121 - Bathtub set with hand shower _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **East Side CRIES121** is a dual-control, 5-hole deck-mounted bath edge mixer featuring mechanical mixing, a diverter with two outlets, a spout, and a detachable metal anti-scale mini showerhead with the innovative **FOLLOW ME** technology, all complemented by a recessed part. This sophisticated piece is available in a variety of premium finishes, including Chrome, Brushed Black Chrome PVD, Polished Gold Brass PVD, Brushed Gold Brass PVD, Brushed Metallic, Black Matt PVD, Polished Rose Gold PVD, and Brushed Rose Gold PVD. Designed in collaboration with **angelettiruzza design**, the East Side series draws inspiration from the industrial aesthetics of 1970s New York lofts, particularly the East Side district, blending tactile knurling details with a raw, mechanical essence for a truly unique experience. A 3D file of the product is also available for download, allowing for seamless integration into design projects. **CRISTINA Rubinetterie**, the supplier, is a renowned Italian brand established in 1949, celebrated for its fusion of cutting-edge technology and timeless elegance in high-quality faucets and bathroom accessories, making it a preferred choice for luxury and contemporary spaces worldwide.

SX CRISX602 - 3 hole stainless steel shower set with hand shower _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **SX CRISX602** is a single-control, wall-mounted external set designed for showers and bathtubs, featuring mechanical mixing, a diverter with two outlets, a fixed support, a water outlet, an anti-scale mini showerhead, and a durable, long-life hose. This elegant set is complemented by a brushed stainless steel AISI finish, offering both style and functionality. It is designed to pair with the recessed parts CRICS100 (RH) or CRICS101 (LH). Additionally, a 3D file of the product is available for download, allowing for seamless integration into design plans. **CRISTINA Rubinetterie**, the Italian manufacturer behind this product, has been a leader in high-quality faucet and bathroom accessory design since 1949, renowned for blending cutting-edge technology with timeless elegance. Based in Gozzano, Northern Italy, the company is celebrated for its premium materials, sustainable practices, and innovative designs that cater to luxury residential, hospitality, and wellness projects worldwide.

X-STEEL 316 69628EX - Wall-mounted single handle stainless steel washbasin mixer without waste _ newform

newform > Tap

The X-Steel 316 69628EX is a sleek single-lever wall mixer group crafted from premium stainless steel, featuring a long spout and designed for external use, to be paired with the concealed part art. 27852. This product is part of Newform's Save Water collection, reflecting the company's commitment to sustainability by offering water-saving mixers that reduce flow rates to 5 l/m, cutting water usage by up to 50% and promoting energy efficiency. The X-Steel 316 series embodies durability, eco-friendliness, and hygiene, making it a perfect choice for modern, sustainable living. A downloadable 3D file of the product is available for detailed visualization and planning. Newform, an Italian interior design leader since 1983, is renowned for its innovative and stylish bathroom and kitchen fixtures, blending functionality with minimalist aesthetics to cater to both residential and commercial spaces globally.

PARK LIMITED EDITION 69806E - External control for concealed diverter _ newform

newform > Tap

The Park L.E. 69806E is an external control designed for concealed diverter and stop valves, offering versatile configurations with 1 to 5-way outlets to suit various plumbing setups. It features 3/4” connections with adapters to 1/2”, making it compatible with concealed single lever shower mixers and thermostatic mixers, and is designed to pair seamlessly with concealed body art models 27891, 27892, 27893, 27894, 27895, 27896, and 27897. Available in premium finishes like Glossy Gold-Matt Black and Chrome-Matt Black, this product is part of the LIMITED EDITION PARK collection, crafted to meet the demands of international markets with a blend of classical and contemporary aesthetics. A downloadable 3D file of the product is also available for detailed visualization and planning. Manufactured by Newform, a renowned Italian interior design supplier established in 1983, the Park L.E. 69806E reflects the company’s dedication to innovation, quality, and timeless design. Newform specializes in creating stylish and functional bathroom and kitchen fixtures, offering a wide range of products that combine durability with modern aesthetics, catering to both residential and commercial spaces worldwide.

ACCESSORI DELUXE 68205 - Wall-mounted toothbrush holder _ newform

newform > Sanitary accessories

Art. 68205 - Wall-mounted tumbler holder, a sleek and functional accessory designed to enhance the organization and aesthetic of your bathroom or kitchen space. This product is part of the innovative collection by Newform, a renowned Italian interior design supplier established in 1983, celebrated for its high-quality, stylish, and durable bathroom and kitchen fixtures that seamlessly blend functionality with modern aesthetics. A 3D file of the tumbler holder is available for download, allowing for easy visualization and integration into your design plans.

ACCESSORI DELUXE 68223 - Toilet roll holder _ newform

newform > Sanitary accessories

Art. 68223 - Wall-mounted paper holder, a sleek and functional bathroom accessory designed to complement modern interiors with its minimalist aesthetic and durable construction. The 3D file of this product is available for download, allowing for seamless integration into design plans. Newform, the supplier, is a renowned Italian interior design company founded in 1983, celebrated for its innovative and stylish bathroom and kitchen fixtures that blend functionality with timeless design, catering to both residential and commercial spaces worldwide.

ACCESSORI DELUXE 68222 - Robe hook _ newform

newform > Sanitary accessories

Art. 68222 - Robe Hook: A sleek and functional robe hook designed to add both style and practicality to your bathroom or dressing area, featuring a minimalist aesthetic that complements modern and contemporary interiors. The 3D file of this product is available for download, allowing for seamless integration into design projects. Newform, an esteemed Italian interior design supplier founded in 1983, is renowned for its innovative and stylish bathroom and kitchen fixtures, blending cutting-edge design with durability and performance to cater to both residential and commercial spaces worldwide.

O'RAMA - Thermostatic shower tap _ newform

newform > Tap

Art. 474 - Exposed Shower Thermostatic Mixer, part of the B-EASY collection, embodies the O'RAMA product line's vision of transcending conventional design with a dynamic and bold perspective. This collection by Newform redefines simplicity as a form of expression, offering products that are effortless to select and operate. The O'RAMA mixer stands out with its robust, upward-reaching structure, exuding strength while showcasing balanced geometric lines. Its elegant, understated design, featuring minimalistic and streamlined forms, positions it as an iconic piece. The mixer's compact body, paired with a distinctive lever, injects an original and vibrant flair, securing its place among the brand's premier collections. Central to its design is the pursuit of innovative forms, resulting in a mixer that combines harmonious lines with user-friendly functionality. O'RAMA provides a variety of material and color options, allowing for customization and offering diverse solutions for interior design. The tap is available in a fully chromed finish or with a lever in black matte or white lacquer, accentuating the product's intricate details. Additionally, a 3D file of the product is available for download, enabling a closer look at its design and features. Newform, the supplier, is a renowned Italian interior design company established in 1983, celebrated for its innovative and stylish bathroom and kitchen fixtures that blend functionality with aesthetic appeal, catering to both residential and commercial spaces globally.

SYNCRONIA - Handshower with anti-lime system _ Bossini

Bossini > Shower

The 6-function handshower, with a diameter of 120 mm, is an intelligent overhead shower designed for versatility and modern functionality, offering a luxurious bathing experience; detailed information about the product can be found under the SYNCRONIA | Handshower collection on Bossini's platform. Bossini, a renowned Italian interior design supplier established in 1958, is celebrated for its innovative, high-quality products that blend contemporary aesthetics with functionality, catering to both residential and commercial spaces. Additionally, a downloadable 3D file of the handshower is available for customers to explore its design and compatibility with their spaces.

Dream 2 Sprays - Ceiling mounted 2-spray overhead shower _ Bossini

Bossini > Shower

The Dream/2 Shower Head by Bossini is a versatile ceiling-mounted shower system designed to elevate your bathing experience with its dual-functionality and flexible water connection. Measuring 570 x 470 mm, it offers a multisensory journey with multiple spray modes, including a wide-rain jet, a soft nebulized mist, a powerful cascade, a rain waterfall, and a natural Kneipp jet, transforming your shower into a luxurious day-spa retreat. Engineered with Bossini's patented air suction duct technology, the showerhead efficiently eliminates residual water from the distribution chamber, minimizing stagnation and ensuring optimal hygiene. A 3D file of the product is also available for download, allowing for seamless integration into your design plans. Bossini, a renowned Italian interior design brand established in 1958, is celebrated for its innovative, high-quality products that blend contemporary aesthetics with functionality, catering to both residential and commercial spaces worldwide.

CONNECT 2 NERO SETA - Shower cabin with hinged door _ Ideal Standard

Ideal Standard > Shower

Here’s a refined and expanded product description with a concise supplier overview, including the 3D file availability: *"The CONNECT 2 MATT BLACK shower cabin features a sleek hinged door design, combining modern aesthetics with practical functionality for a stylish bathroom upgrade. A 3D file of the product is available for download, allowing for seamless integration into your design plans. Manufactured by Ideal Standard, a renowned bathroom solutions provider with over a century of expertise, the brand is synonymous with innovative, high-quality fixtures for residential and commercial spaces."* Let me know if you'd like any further adjustments!

CONNECT 2 NERO SETA - Walk in shower _ Ideal Standard

Ideal Standard > Shower

**CONNECT 2 MATT BLACK Walk-in Shower** – A sleek, modern walk-in shower designed for both style and functionality, featuring a matte black finish that adds a contemporary touch to any bathroom. A 3D file of the product is available for download, allowing for easy visualization and planning. **Supplier:** Ideal Standard, a globally renowned bathroom solutions provider since 1873, is known for its innovative, high-quality fixtures and sustainable designs.

D-Code Spare roll holder

duravit > Accessories

Design by sieger design

D-Code Soap dispenser

duravit > Accessories

Type of mounting: Wall-mounted Design by sieger design

D-Code Towel shelf

duravit > Accessories

Design by sieger design

D-Code Toilet paper holder

duravit > Accessories

Design by sieger design

Starck T Glass holder

duravit > Accessories

Accent colour: White Matt, Glass, Brass, Type of mounting: Wall-mounted, Position toothbrush holder: Right, Left Design by Philippe Starck

Karree Soap dispenser

duravit > Accessories

Chrome, Type of mounting: Wall-mounted Design by Duravit

Universal Towel rail

duravit > Accessories