SUPACLPP - Perimeter clip - 2d files - 3d files

PRODUCT DESCRIPTION

SUPACLPP - Perimeter clip The SUPACLPP perimeter clip, is applied to the head of the supports that delimit the wall perimeter of the installation. The aim is to create a minimum distance from the wall so that the flooring, once laid, is able to absorb expansion and not create tension in the structure. How to position the clip Always position the clip with the two side hooks upwards. The central slot in the SUPACLPP clip allows interlocking between the tie-bases on the head of the pedestal. The SUPACLPP clip allows you to distance the installation from the wall, absorbing expansion and protecting the tile from possible tensions or breakages.

SUPPLIER: PROFILITEC

TYPE: ACCESSORIES

HTTPS://US.PROFILITEC.COM

[email protected]

OTHER SUPPLIERS

A wide range of product from near to 3,000 suppliers around the world.

Other Products From This Supplier

A wide range of product from furniture to finishes to meet the desire of all designers.

TRIMTEC TR: multipurpose profiles in different materials

profilitec > Accessories

TRIMTEC TR: multipurpose profiles in different materials TRIMTEC TR is a complete range of brass, aluminium and stainless steel trim profiles designed for fast and efficient installation of any flooring type, regardless of size and thickness. TRIMTEC TR is available in various heights from 2 to 30 mm, matching different tile thicknesses. In the aluminium and brass versions, a dovetail groove maximizes the grout grip and edge protection for both vertical and horizontal tile laying. TRIMTEC TR profiles are conceived for tile laying, but can also be used with other types of flooring such as stone, wood and industrial resin floors. TRIMTEC TR profiles are mainly used as transition trims between two types of flooring (for example between tiling and moquetteing) and as expansion joints when two lengths are laid side by side. They can also be used as trimming for ceramic skirtings and as edge protection for any floor thickness. In some cases the profiles may be used as entrance mat framing. TRIMTEC TR Curveline: the bendable version of the TR TRIMTEC TR series is also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code. TRIMTEC TR how to install 1) Choose the trim size according to the tile thickness. The trim should be 0.5+/-1mm lower than the tile, therefore not exceeding the height of the tile. 2) Apply tile adhesive. 3) Cut the profile to required length, leaving extra space for linear expansion. The perforated flange of the trim is then firmly embedded into the adhesive and aligned. 4) Trowel an additional layer of adhesive over the perforations in the profile and in the dovetail groove of the vertical section. 5) Leave a tiny gap of approximately 0.5+/-2mm between the trim and the tile for final grouting.

TRIMTEC SR Edging perimeter profiles for ceramic floors

profilitec > Accessories

TRIMTEC SR Edging perimeter profiles for ceramic floors TRIMTEC SR is especially recommended for finishing the perimeter of ceramic floors, particularly when they abut a vertical surface. It is also used as stair nosing and trimming in balconies and exit ways. TRIMTEC SR profiles have an extended vertical edge to cover and protect border surfaces and prevent future cracking. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. The aluminium section is designed with vertical dovetail anchoring. TRIMTEC SR CURVELINE: bendable profiles TRIMTEC SR series is also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code.

BORDERTEC SBR Edging profiles for balconies and patios

profilitec > Accessories

BORDERTEC SBR Edging profiles for balconies and patios The BORDERTEC BSR is recommended for contouring marble and stone balconies and sidewalks. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. BORDERTEC BSR in size BSR 20/* can be used with PROFILITEC floating floor support systems. BORDERTEC BSR contains all necessary elements for state-of-the-art installation.

ROUNDJOLLY profiles for thin floors

profilitec > Accessories

ROUNDJOLLY profiles for thin floors ROUNDJOLLY profiles join floor types of different thicknesses, finishing and protecting the tile edge. Available in aluminium and stainless steel, this profile is ideal for renovations with thin tiles.

SQUAREJOLLY SJ: square shape trims

profilitec > Accessories

SQUAREJOLLY SJ: square shape trims Squarejolly SJ is a multipurpose aluminium profile used in laying adhesive ceramic floor and wall coverings. Its uniquely symmetrical shape lends itself to endless detailing possibilities. In the technical specs, H corresponds to the tile thickness and B = H + 1mm corresponds to the visible width of the profile. In the aluminium version, a patented internal cavity with a dovetail groove maximizes vertical grout grip and edge protection. The sectional design of the SQUAREJOLLY SJ profile provides a completely leveled surface, making it resistant to vertical loads and perfectly suitable for flooring applications. How SJ models can be used SQUAREJOLLY SJ is a multipurpose profile with a wide range of applications: • Leveled flooring intersections • Decorative accent bands • Wall tile contouring • Entrance mat framing • skirting finishing and edging • Stair nosing

COVERTEC EP: Transition trims for floors with the same height

profilitec > Accessories

COVERTEC EP: Transition trims for floors with the same height The COVERTEC EP profile joins two adjacent flooring surfaces (for example: concrete/ceramic tile, wood/ceramic tile and other resin or vinyl floor combinations). The overlapping section allows differential movement of the flooring, hides edging imperfections and prevents chipping and cracking. Available in aluminium and brass with patented dovetail anchoring.

COVERTEC SP: T shape trims for floors with the same height

profilitec > Accessories

COVERTEC SP: T shape trims for floors with the same height COVERTEC SP is a profile designed to join two adjacent existing floors at the same height but it can cover imperfections in cutting or slight variations of height to be found on a tiled floor joining to a wooden one for example. Thanks to its shape, available in 3 different widths, this profile helps floor coverings to maintain the minimum distance thus acting also as a dilatation joint.

STRIPTEC ST: Transition trims for floors with different heights (max 5mm)

profilitec > Accessories

STRIPTEC ST: Transition trims for floors with different heights (max 5mm) STRIPTEC ST profiles are designed to join adjoining floors of equal or different type and thickness. The rounded shape of this profile covers edge imperfections and allows a slight rotation, compensating for elevation differences of up to 5mm. It can also be used as a termination profile, given a floor thickness of up to 5mm. Available in two versions: self-adhesive and screw-on. STRIPTEC how to install Installation of self adhesive version: 1) Make sure the base is solid, flat, level, clean and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of the pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

STRIPTEC ST38: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC ST38: Transition trims for floors with the same heights ST38 aluminium profiles (available in the adhesive or perforated version) for transition or threshold cover with knurled surface. Slightly rounded shape. The shaped edge allows perfect contact with the floor. Used to minimize installation defects and creating expansion joints.

STRIPTEC STP: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC STP: Transition trims for floors with the same heights STP Brass profiles (available in the adhesive or perforated version) for connection or threshold cover with smooth brass surface. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

STRIPTEC STB: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC STB: Transition trims for floors with the same heights STB profiles in brass or aluminium (available in the adhesive or perforated version) for connection or threshold cover with smooth brass and aluminium grooves. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

MULTICLIP CLG Transition trims for all kind of floors

profilitec > Accessories

MULTICLIP CLG Transition trims for all kind of floors The innovative, patented MULTICLIP® CLG 370 profiles has a tilting head to adjust minor height differences up to 3mm. MULTICLIP CLG allows flooring expansion and contraction making it the perfect transition profile in between different flooring materials. You can easily increase the height by stacking up to 3 plastic rails one on top of the other. A 16mm internal cavity acts as an expansion joint, allowing 5mm of differential movement. Typically, laminate wood flooring expands about 5mm per plank due to humidity.

MULTIFIIX CLG Transitions trims for floors with the same height

profilitec > Accessories

MULTIFIIX CLG Transitions trims for floors with the same height Patented transition profile for floors at the same level, slightly rounded in anodised aluminium finish and with high resistance wood effect coating. This article has been conceived for a purely domestic environment and for Do-it-yourself use, to be fixed primarily with the nylon "MULTIFIX" plugs. MULTIFIX how to install 1. Forare con punta da 6 mm 2. Inserire gli appositi tasselli 3. Allineare i tasselli 4. Martellare in modo uniforme

MULTICOVER CLG - Transition trims for floors with the same height

profilitec > Accessories

MULTICOVER CLG - Transition trims for floors with the same height CLG transition profiles in anodised aluminium finish and with high resistance wood effect coating. The elements that make up the MULTICOVER® system fit perfectly thanks to the plastic rail and do not move once clipped together. The profiles are also available in a perforated version, for fixing with screws and plugs or self-adhesive, equipped with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective paper from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry

WOODTEC LG edging trims for wooden floors

profilitec > Accessories

WOODTEC LG edging trims for wooden floors WOODTEC LG profiles are specifically designed to join two adjoining floating wood floors. The size and shape of the profile section allows for differential movement typical of wood flooring. Its smooth top surface fits under doorways making it perfectly suitable for thresholds.

CARPETEC MG transition trims for carpet floors

profilitec > Accessories

CARPETEC MG transition trims for carpet floors Designed for carpet flooring, CARPETEC MG profiles are composed of two elements: a base track onto which the carpet is laid, and an interlocking, grooved top piece that snaps shut and compresses the carpeting.

CARPETEC MP Transition / edging trims for carpet floors

profilitec > Accessories

CARPETEC MP Transition / edging trims for carpet floors The multipurpose, grooved moquetteEC MP profiles designed to compress moquette flooring at different elevations. They may be used to join two types of moquetteing or as edge profiles.

STC Profile to cover electric cables

profilitec > Accessories

STC Profile to cover electric cables Profile used to cover electric cables. Available in the adhesive version.

CUBETEC CU: Transition trims for floors with the same height

profilitec > Accessories

CUBETEC CU: Transition trims for floors with the same height CUBETEC CU is a decorative profile that allows you to create a transition between floors of the same height or as a wall transition. The profile is characterized by the constancy of the visible dimension (8 mm) which is independent of the height of the profile. Available in polished AISI 304 stainless steel and satin steel.

CUBETEC FI: Transition trims for floors with the same height

profilitec > Accessories

CUBETEC FI: Transition trims for floors with the same height CUBETEC FI is a linear and decorative finishing element which provides long-lasting and heavy-duty tile edge protection. The CUBETEC FI profile is a decorative joint between different flooring types, trimming for ceramic tile and suitable for welcome mat framing. Two profile widths are available in polished stainless steel AISI 304.

VARIOTEC DS Transition trims to be used after flooring installation

profilitec > Accessories

VARIOTEC DS Transition trims to be used after flooring installation VARIOTEC DS is a stainless steel or brass profile for floors with differences in height from 7 to 12 mm. Supplied with adhesive on the lower side for a quick and long-lasting installation. Fitting to combine ceramic or parquet floors with lower thickness materials, such as moquettes or vinyl floors. Adhesives: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

LINETEC PR Transition trims

profilitec > Accessories

LINETEC PR Transition trims Extruded brass transition profile. Perimeter profile for wooden floors or ceramic with thickness 10 mm. They allow to solve quickly and with an excellent aesthetic result the most frequent junction situations between floors of different nature, where an appropriate connection system has not been foreseen at the time of installation.

LINETEC PQ Transition trims for floors with the same height

profilitec > Accessories

LINETEC PQ Transition trims for floors with the same height Profiles in extruded brass or stainless steel for transition between floors already installed. It fits between floors of 10 mm thick. They allow to solve quickly and with an excellent aesthetic result the most frequent transition situations between floors of different nature, where an appropriate transition system has not been foreseen at the time of installation.

LINETEC PU Transition trims for floors with the same height

profilitec > Accessories

LINETEC PU Transition trims for floors with the same height Extruded U-shaped brass profile for transition between floors already installed of 10 mm thick. It solves quickly and with an excellent aesthetic result the most frequent transition situations between floors of different nature, where an appropriate connection system has not been foreseen at the time of installation.

MULTICPLIP CLP perimetral trims that allows the flooring expansion / contraction

profilitec > Accessories

MULTICPLIP CLP perimetral trims that allows the flooring expansion / contraction The patented MULTICLIP® CLP 270 aluminium perimeter profile allows floor edge finishing without skirtings. A 16mm internal cavity allows 3/16’’ (5mm) of differential movement. This profile is also suitable along sliding door tracks and as entrance mat framing.

WOODTEC LT edging trims for wooden floors

profilitec > Accessories

WOODTEC LT edging trims for wooden floors The WOODTEC LT profiles are specifically designed for finishing the perimeter of floating wood floors, particularly when they transition to another floor type at the same elevation or abut a vertical surface. While acting as an expansion joint, they also allow floor edge finishing without skirtings. This profile is also suitable along sliding door tracks and as entrance mat framing. Installed with flathead screws.

CARPETEC MD edging tims for carpet floors

profilitec > Accessories

CARPETEC MD edging tims for carpet floors Perimeter profiles in anodised aluminium for flexible floors such as moquettes and coconut mats. The profiles, by pressing them, close, locking the edge, covering the cutting defects and preserving the edge. Available in the perforated and with hooks version to allow a better grip of the moquette.

CARPETEC MS edging tims for carpet floors

profilitec > Accessories

CARPETEC MS edging tims for carpet floors Rounded perimeter profile in anodised aluminium or brass for flexible floors such as moquetteing and coconut mats. The profiles, by pressing them, close, locking the coating in a lasting way, covering the cutting defects and preserving the edge. The profile is serrated both in the rounded part on the inside and on the surface to allow a better grip of the moquette.

ENTRYTEC BU Profiles for entrance mattings

profilitec > Accessories

ENTRYTEC BU Profiles for entrance mattings Reversible profile to create perimeters suitable for containing coconut doormats, moquettes or technical aluminium doormats. The profile, thanks to the particular shape, allows to obtain the two most common doormat thicknesses of 18 and 23 mm. The laying of the frame, which can be easily assembled with the brackets supplied, must be prepared at a height before laying the adjacent floor. The profile can also be laid with the help of modular and sliding fixing brackets inside the slots.

ROUNDTEC RD Transition trims for floors with different heights

profilitec > Accessories

ROUNDTEC RD Transition trims for floors with different heights The ROUNDTEC profile is mainly used in transitioning floor types of different thicknesses, for example from ceramic tile to thin linoleum. Its rounded section provides a smooth level change of 3mm, making it suitable between two floor types or as an end profile. ROUNDTEC can even be used as stair nosing or edging for tile countertops. Available in brass with patented dovetail anchoring.

ZEROTEC ZRM Ramp trims for floors with different heights

profilitec > Accessories

ZEROTEC ZRM Ramp trims for floors with different heights ZEROTEC ZRM profile is the ideal solution for joining two floors at different levels, between a ceramic covering and one in moquette moquetteing for instance. This trim allows a 5 mm progressive sloping difference to the next floor to match thus making safer when treading over the connecting floors. The ramp inclination has been conceived for vehicle and wheel carts transit.

ZEROTEC ZR Transition trims for floors with different heights and of different materials

profilitec > Accessories

ZEROTEC ZR Transition trims for floors with different heights and of different materials ZEROTEC ZR allows the installer to perfectly match different floor levels when laying ceramic tile or wood flooring over an existing floor. Because of the slope, ZEROTEC profiles are ideal in passage areas for hand trolley and cars, while providing edge protection resistant to vertical loads. The brass version is recommended for industrial applications in garages and shopping centers. Available in aluminium and brass with patented vertical dovetail anchoring. ZEROTEC ZR Curveline: bendable version of the Zerotec Some ZEROTEC ZR profiles are also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code.

Zerotec ZRN60 Transition trims for floors with different heights and of different materials

profilitec > Accessories

Zerotec ZRN60 Transition trims for floors with different heights and of different materials Zerotec ZRN60 has been designed to optimize transitions between different flooring materials, situation that often occurs in public environments such as hotels and restaurants. Its delicate line and its defined inclination allow to optimize the transition between different heights: from 8, 10 or 12.5 mm thick tiles to another 6 mm thick floor, giving a modern and elegant touch to the environment. The ramp length is 8.5 mm fixed for all heights. This particular design protects and hides the portion of the underlying coating (6 mm thick) from impacts and mechanical hits, preventing its possible breakage.

Zerotec ZR60 Transition trims for floors with different heights and of different materials

profilitec > Accessories

Zerotec ZR60 Transition trims for floors with different heights and of different materials Zerotec ZR60 has been designed to optimize transitions between different flooring materials; it can be typically found in public spaces, like hotels and restaurants. Its delicate line and gradual inclination allows a smooth transition between different floor levels: from 8 mm, 10 mm and 12.5 mm tile to an adjacent floor covering with a thickness of 6 mm, excellent for modern and elegant interior detailing. The profile’s unique shape hides and protects the edge of the flooring below (6 mm thickness) from mechanical impact, hiding imperfections while preventing damage caused by passage and use.

Profili RAMPTEC ZRR Ramp trims for floors with different heights

profilitec > Accessories

Profili RAMPTEC ZRR Ramp trims for floors with different heights The 20° slope of the anodised aluminium RAMPTEC ZRR profile provides a safe and progressive transition between two different floor levels. The vertical edge has a dovetailed internal cavity that maximizes grout and adhesive grip on load bearing points.

LEVELTEC RPR Transition trims to be used after flooring installation

profilitec > Accessories

LEVELTEC RPR Transition trims to be used after flooring installation LEVELTEC RPR is a model with the function of perimeter or connection profile between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wooden floors or moquetteing. LEVELTEC RPR is able to compensate for differences of 8 ÷ 14 mm. The profile is normally supplied with an adhesive with high sealing characteristics or without an adhesive.

LEVELTEC RP Transition trims to be used after flooring installation

profilitec > Accessories

LEVELTEC RP Transition trims to be used after flooring installation LEVELTEC RP is a series of profiles with a terminal or connecting function between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wood or carpet floors. The LEVELTEC RP series consists of profiles with heights between 4.5 ÷ 12.5 mm, capable of compensating for height differences of 3 ÷ 14 mm. The profile is normally supplied with adhesive of high sealing properties. They are also available in a drilled version for fixing with screws and dowels. LEVELTEC RP: transition profile in different dimensions Smooth and grooved LEVELTEC profiles in varying widths and heights transition floors of different elevations. Their sectional thickness makes them especially suitable for high traffic areas and the end detailing allows frictionless contact between the profile and floor. LEVELTEC RP how to install Installation of self-adhesive version: 1) Make sure the base is solid, flat, level, clean, and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

VARIOTEC DC Adhesive flooring profiles

profilitec > Accessories

VARIOTEC DC Adhesive flooring profiles VARIOTEC DC profiles’ innovative design elegantly rotates and adapts to match different floor elevations. By simply rotating its shape, this profile can adapt to floor thicknesses ranging from 7 to 14mm. Use our adhesive for on-site installation.

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8")

profilitec > Accessories

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8") Especially conceived for residential and light commercial use, VARIOTEC DK profiles are available in a wide range of decorative finishes. This profile series is designed to join different floor types with an elevation difference ranging from 7 to 16mm. VARIOTEC DK profiles are self-adhesive - simply cut the profile to the desired length, remove the adhesive backing and press uniformly downwards on to the profile to install. Always make sure the base is solid, flat, level, clean and dry.

VARIOTEC DR Transition trims to be used after flooring installation

profilitec > Accessories

VARIOTEC DR Transition trims to be used after flooring installation VARIOTEC DR are stainless steel or brass profiles used as a transition between already installed floors of different nature and level. Self-adhesive: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

Recently Viewed Products

A wide range of product from furniture to finishes to meet the desire of all designers.

Hand shower holder

duravit > Shower

Plastic, Hand shower holder: Fixed, Bracket shape: Conical

Hand shower set

duravit > Shower

Silicone nubs

Metal Line 95 - Aluminium skirting board

profilpas > Accessories

MULTICLIP CLG Transition trims for all kind of floors

profilitec > Accessories

LINETEC PU Transition trims for floors with the same height

profilitec > Accessories

WOODTEC LT edging trims for wooden floors

profilitec > Accessories

Zerotec ZR60 Transition trims for floors with different heights and of different materials

profilitec > Accessories

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8")

profilitec > Accessories

COVERTEC SP: T shape trims for floors with the same height

profilitec > Accessories

SANITEC SB15 Cove trim

profilitec > Accessories

SANITEC SB15 Cove trim SANITEC SB 15-IL stainless steel cove-shaped profiles are easy to clean and designed to meet hygiene standards in public spaces subject to sanitary inspection, such as hospitals, food processing plants and public bathrooms. To be installed on-site after tile laying.

LISTEC LI 10 glitter listellos for coverings

profilitec > Accessories

LISTEC LI 10 glitter listellos for coverings LISTEC LI 10 glittered aluminium decorative profile is conceived for ceramic tile wall coverings. The unique squared section perfectly aligns with modern rectified tile edges. Due to the 8mm profile thickness and interlocking plastic tie-bases, the strip profile is adaptable to any tile thickness over 7mm. The glittered surface sealed with resin protects against scratches.

JOINTEC GEP angular version upward anchoring of GE joints

profilitec > Accessories

JOINTEC GEP angular version upward anchoring of GE joints The structural joints of the Jointec GEP series are the GE joints transformed into the angular version, for perimeter applications between the floor and the wall, with the use of the multipurpose module JOINTEC P: a lateral anchoring profile in aluminium that can be applied both "to go up" ”, For anchoring to the wall, is hidden in the perimeter gap of the floor. Gates (37 mm) horizontal + 7 / -6 mm vertical dilations + 2 / -2mm.

PAP DIY natural brass symmetrical corner profiles

profilitec > Accessories

PAP DIY natural brass symmetrical corner profiles DIY PAP PROFILES are a range of angular profiles with symmetrical and "L" sides in natural brass 2 meters long which are used as finishing profiles after installation.

SUPACLPP - Perimeter clip

profilitec > Accessories

Shower Heads Round 8” Black

porcelanosa > Shower

Shower Heads Round 8” Black - Shower Heads

GLOBE CONE - LED polycarbonate floor lamp _ Tom Dixon

Tom Dixon > Floor lamp

The GLOBE is a sleek, spherical floor lamp that embodies minimalist design, featuring a highly mirrored, reflective orb that transforms into a mesmerizing display of internal light reflections when illuminated by its integrated 6W LED. With a light output of 800 lumens, a color temperature of 3000K, and a CRI >80, it offers warm, high-quality illumination and is compatible with mains dimming (leading and trailing edge). Available in Silver, Copper, and Opalescent finishes, the GLOBE is a versatile addition to any modern interior. A 3D file of the product is also available for download, allowing for seamless integration into design projects. Designed by Tom Dixon, a renowned British designer and manufacturer celebrated for their innovative and modern lighting, furniture, and accessories, the GLOBE reflects the brand's commitment to combining cutting-edge design with functionality, making it a standout piece for residential, commercial, or hospitality spaces.

SPUN - Round brass high side table _ Tom Dixon

Tom Dixon > Coffee table

The Spun Tall Table features a sleek circular tabletop paired with an elegantly oversized curved rim, designed to complement the Spun Champagne Bucket and Table, creating a cohesive and sophisticated aesthetic. For further details, the manufacturer, Tom Dixon, provides comprehensive information on their innovative designs. Tom Dixon, a renowned British designer and manufacturer, is celebrated for its modern and innovative lighting, furniture, and accessories, often crafted from premium materials like copper, brass, and marble, catering to a variety of interior styles and budgets. Additionally, a 3D file of the Spun Tall Table is available for download, allowing for detailed visualization and planning.

WINGBACK MICRO - Fabric small sofa high-back _ Tom Dixon

Tom Dixon > Sofa

The Wingback Micro collection is a modern reinterpretation of British classics, featuring a chair, dining chair, sofas, and an ottoman, all inspired by traditional 17th-century Wingback and balloon-back designs originally crafted for Shoreditch House Members Club. Each piece boasts a sculptural foam shell over a steel frame with a modelled plywood base, layered with cut foam and a pocket-sprung seat cushion for exceptional comfort. Available in a variety of Kvadrat fabrics and colors, the collection offers four leg options: Black, Natural, Chrome, and Brass. Additionally, a downloadable 3D file of the product is available for design and planning purposes. Designed and manufactured by Tom Dixon, a renowned British brand celebrated for its innovative and modern interior design products, the company combines premium materials and craftsmanship to create pieces suitable for residential, commercial, and hospitality spaces, with a global presence and showrooms in key locations worldwide.

DESDEMONE - Fabric double bed with upholstered headboard _ Ligne Roset

Ligne Roset > Bed frame

The Desdemone bed is a thoughtfully designed double bed featuring an upholstered fabric headboard, crafted by renowned designers Nasrallah & Horner, who reimagined its functionality and aesthetic appeal. The headboard, reminiscent of a protective shell, invites relaxation and versatility, whether for reading, watching TV, or writing, while its seamless integration with the base creates a visually light and elegant silhouette, even in the high-headboard version. This bed embodies a modern lifestyle, serving as a multifunctional centerpiece that combines comfort and style, offering a serene cocoon-like retreat for restful nights. A 3D file of the Desdemone bed is available for download, allowing for detailed visualization and planning. Manufactured by Ligne Roset, a prestigious French furniture brand established in 1860, the Desdemone bed reflects the company’s commitment to innovative, high-quality craftsmanship and contemporary design, making it a standout addition to any modern living space.

TRAVEL - Tall chipboard office storage unit with hinged doors with castors _ Ligne Roset

Ligne Roset > Cabinet

The **Travel** is a sleek and mobile chipboard office unit on wheels, designed for both functionality and modern aesthetics. It features a collection of chests crafted from laminated particleboard with horizontal ribbing on all four sides and rounded corners, available in a choice of white laminate paired with a milk glass top. The unit is accentuated with zamac handles, whose central section matches the chest's color, adding a refined touch. A 3D file of the product is available for download, allowing for detailed visualization and planning. Manufactured by **Ligne Roset**, a prestigious French furniture brand established in 1860, the Travel unit reflects the company’s legacy of innovative, high-quality craftsmanship and contemporary design, making it a perfect addition to modern workspaces.

VITRUM 1 - Niche Walk in shower with tray _ DISENIA

DISENIA > Shower

The Vitrum enclosure redefines wellbeing by blending aesthetic elegance with functional design, offering a contemporary style that seamlessly adapts to diverse needs. Every detail is meticulously crafted to create a space of natural relaxation, where each accessory enhances the shower experience with sophistication. A 3D file of the product is available for download, allowing for precise visualization and planning. Manufactured by DISENIA, a renowned Italian supplier of high-end bathroom and kitchen products, the Vitrum enclosure reflects the brand’s commitment to innovative, luxurious designs that elevate modern interiors.

SIMPLY BEAUTIFUL ZSB125 - Wall-mounted 1 hole washbasin mixer _ ZUCCHETTI

ZUCCHETTI > Tap

The Simply Beautiful ZSB125 is a sleek, built-in single-lever basin mixer featuring an aerator, designed by Matteo Thun and Antonio Rodriguez, known for its minimalist yet striking aesthetic and exceptional adaptability, blending affordability with high-quality craftsmanship to appeal to a broad audience. A 3D file of the product is available for download, allowing for detailed visualization and planning. ZUCCHETTI, the Italian manufacturer behind this product, has been a leader in the design and production of premium bathroom and kitchen fixtures since 1929, renowned for its innovative, stylish, and durable solutions that cater to both residential and commercial spaces worldwide.

PAN ZP8046 - Bathtub mixer with hand shower _ ZUCCHETTI

ZUCCHETTI > Tap

The Pan ZP8046 by ZUCCHETTI is a built-in single-lever bath-shower mixer featuring a 3-way diverter and shower set, designed with an organic aesthetic that reinterprets the classic cylinder-type mixer into a modern, versatile tap system. This collection emphasizes smooth, natural transitions between elements, inspired by the seamless connection of a tree trunk to its branches, offering a blend of lightness, simplicity, and innovative design. The product is part of a broader range that combines timeless elegance with functional versatility, suitable for various interior styles. A 3D file of the product is available for download, allowing for detailed visualization and planning. ZUCCHETTI, an Italian company established in 1929, is renowned for its high-quality bathroom and kitchen fixtures, blending innovative design with durability and catering to both residential and commercial projects worldwide.

FOIL CRIFL103 - Single handle bathtub mixer with hand shower _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **FOIL CRIFL103** is a sleek, single-control wall-mounted external set designed for showers and bathtubs, featuring a metal plate, mechanical mixing, a diverter with three outlets, and a 180 mm spout. It includes an anti-scale mini showerhead, a fixed support, a water outlet, and a durable long-life hose. Available in a variety of premium finishes such as polished chrome, brushed black chrome, PVD polished gold brass, brushed metallic, matte black, and PVD rose gold, this collection combines functionality with timeless elegance. Inspired by the Streamline style of the 1930s and the aerodynamic car designs of the 1950s and 1960s, the FOIL series reinterprets the classic cylindrical tap with dynamic, dual-curvature shapes, offering a modern yet sophisticated aesthetic. The 3D file of the product is available for download, making it easier for designers and architects to integrate it into their projects. **CRISTINA Rubinetterie**, a renowned Italian manufacturer established in 1949, is celebrated for its innovative designs and high-quality faucets, blending cutting-edge technology with timeless elegance to cater to luxury residential, hospitality, and wellness projects worldwide.

FOIL CRIFL181 - Deck mounted single handle bathtub tap with hand shower _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **FOIL CRIFL181** is a sleek and innovative single-lever deck-mounted bath edge mixer, designed by Marco Pisati for CRISTINA Rubinetterie. This elegant fixture features mechanical mixing, an automatic diverter with two outlets, a "waterfall" effect spout, and a detachable anti-scale mini showerhead with FOLLOW ME technology, all complemented by a recessed installation. Available in a variety of premium finishes, including polished chrome, brushed black chrome, PVD gold brass, brushed metallic, matte black, and PVD rose gold, the FOIL series reinterprets the classic cylindrical tap with dynamic, aerodynamic shapes inspired by 1930s Streamline design and 1950s-60s car bodies. The tap’s unique dual-curvature design—featuring two distinct circular arcs on the body and spout—creates a soft, semi-elliptical radius, while the ergonomic lever ensures ease of use. With a water-saving aerator (5l/m) and a design that facilitates inspection and maintenance, the FOIL CRIFL181 combines modern functionality with timeless elegance. A downloadable 3D file of the product is available for design and planning purposes. **CRISTINA Rubinetterie**, established in 1949 in Gozzano, Italy, is a globally recognized leader in high-quality faucets and bathroom solutions, renowned for blending cutting-edge technology with luxurious, sustainable design.

FOIL CRIFL221 - Countertop single handle washbasin mixer _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **FOIL CRIFL221** is a sleek, single-control, single-hole deck-mounted washbasin mixer featuring mechanical mixing and a 1" 1/4 pop-up waste. Designed by Marco Pisati for CRISTINA Rubinetterie, this tap reinterprets the classic cylindrical design with dynamic, aerodynamic shapes inspired by the Streamline style of the 1930s and the car bodies of the 1950s and 1960s. The FOIL series offers a variety of premium finishes, including polished chrome, matte black, brushed and polished PVD rose gold, brushed metallic, and more. With a water-saving aerator (5l/m) and an ergonomic lever design, this mixer combines elegance, functionality, and ease of maintenance. A 3D file of the product is available for download, making it easier for designers and architects to integrate it into their projects. **CRISTINA Rubinetterie**, established in 1949 in Gozzano, Italy, is a renowned leader in high-quality faucet design and manufacturing, blending cutting-edge technology with timeless elegance for luxury residential, hospitality, and wellness projects.

EAST SIDE - Brass washbasin tap with matt black finish _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **3-hole basin mixer with 1”1/4 Up&Down waste** is part of the **EAST SIDE series** by **CRISTINA Rubinetterie**, a collaboration with **angelettiruzza design**, inspired by the industrial aesthetics of 1970s New York lofts, particularly the East Side district. This series features a unique **knurling design**, which offers a tactile, raw, and visually striking material contrast, drawing inspiration from mechanical tools to enhance its industrial character. Available in three sizes—**CRIES204 (Small)**, **CRIES205 (Regular)**, and **CRIES206 (Tall)**—the mixer combines functionality with a bold, retro-modern aesthetic. A **3D file of the product** is available for download, allowing for seamless integration into design projects. **CRISTINA Rubinetterie**, an Italian leader in luxury faucets and bathroom solutions since 1949, is renowned for its fusion of cutting-edge technology, timeless elegance, and sustainable craftsmanship, making it a preferred choice for high-end residential, hospitality, and wellness projects worldwide.

QUADRI CRIQD943 - Wall-mounted washbasin mixer with individual rosettes without waste _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The Quadri CRIQD943 is a wall-mounted dual-lever basin mixer designed for large 3-hole installations, featuring three rosettes and a mechanical mixer without a pop-up waste. With a spout length of 225 mm, it is designed to be paired with either the CRICS234 (side spout) or CRICS233 (central spout) built-in components, and is available in a sleek chrome finish. This product exemplifies Quadri's clean, rational design philosophy, characterized by geometric lines and flat surfaces that evoke a sense of modern elegance. A downloadable 3D file of the product is available for design and planning purposes. Manufactured by CRISTINA Rubinetterie, a renowned Italian brand established in 1949, the company is celebrated for its fusion of cutting-edge technology and timeless design, offering high-quality faucets and accessories for residential, hospitality, and wellness spaces.

ART CRIAR686 - Single handle shower mixer with plate _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The ART CRIAR686 is a single-control, wall-mounted external shower set featuring a sleek metal plate and mechanical mixing, designed to pair seamlessly with the recessed part CRICS535. Available in elegant finishes like chrome and brushed old brass, this set combines classic design with modern functionality, making it an ideal choice for contemporary bathrooms that exude refinement and sophistication. The soft, sinuous shapes of the series enhance its aesthetic appeal while ensuring practicality for everyday use. A 3D file of the product is available for download, allowing for precise planning and integration into your design project. CRISTINA Rubinetterie, an Italian leader in high-quality faucets and bathroom accessories since 1949, is renowned for blending cutting-edge technology with timeless elegance, offering luxurious and durable solutions for residential, hospitality, and wellness spaces.

CANOVA CRICN202 - 3 hole washbasin mixer with individual rosettes _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **Canova CRICN202** is a dual-control, 3-hole deck-mounted large washbasin mixer featuring mechanical mixing and a 1 1/4" pop-up waste, with a swan neck spout height of 170 mm. Available in a variety of finishes including chrome, yellow gold, brushed antique brass, and PVD polished gold brass, this elegant tap draws inspiration from the alluring aesthetics of the 1930s, making it a perfect choice for those who appreciate timeless tradition and refined craftsmanship. A 3D file of the product is available for download, allowing for seamless integration into design projects. Manufactured by **CRISTINA Rubinetterie**, a renowned Italian brand established in 1949, the company is celebrated for its fusion of cutting-edge technology and timeless elegance, offering high-quality faucets and accessories for luxury residential, hospitality, and wellness spaces.

CANOVA ELITE CRICL100 - Wall-mounted bathtub mixer with hand shower _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The Canova Elite CRICL100 is a dual-control, wall-mounted external bath mixer that combines retro-inspired design with modern functionality. Featuring mechanical mixing, a diverter with two outlets, and a 146 mm spout, it comes equipped with an anti-scale mini showerhead and hose for added convenience. The elegant white ceramic handle and the luxurious Chrome Yellow Gold Oro finish highlight the meticulous attention to detail, making it a perfect choice for bathrooms that blend vintage charm with contemporary sophistication. A 3D file of the product is available for download, allowing for seamless integration into design plans. Manufactured by CRISTINA Rubinetterie, a renowned Italian brand established in 1949, the company is celebrated for its fusion of cutting-edge technology and timeless elegance, offering high-quality faucets and accessories for luxury residential, hospitality, and wellness projects.

SANDWICH CRIPD041 - Wall-mounted rectangular overhead shower with anti-lime system _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Shower

The **CRIPD041 - SANDWICH PLUS anti-lime showerhead** combines innovative design and patented technology to deliver a luxurious showering experience. Crafted from ultra-thin steel sheets layered to a sleek 4 mm thickness, this showerhead ensures a consistent cascade effect even at low water pressure, offering both comfort and water efficiency. Its slim, modern design seamlessly complements contemporary and elegant bathroom settings. A 3D file of the product is available for download, allowing for detailed visualization and integration into design projects. **CRISTINA Rubinetterie**, the Italian manufacturer behind this product, has been a leader in high-quality faucets and bathroom accessories since 1949, renowned for blending cutting-edge technology with timeless elegance.

HAKA 67692E - Single lever concealed mixer _ newform

newform > Tap

The Haka 67692E is a thermostatic concealed mixer featuring a single handle for precise temperature control and a diverter handle with an integrated flow regulator, designed for modern bathrooms with its sleek, minimalist aesthetic. It includes 3/4” inlets with a 1/2” adapter and 1/2” outlets, and is available in 2-way, 3-way, 4-way, and 5-way configurations to pair seamlessly with concealed body art models 31061, 31020, 27888, and 27889, respectively. Inspired by the dynamic and expressive Maori Haka dance, this product embodies strength, identity, and attention to detail, with its ergonomic handle design, vertical knob movement, and a harmonious blend of curved and straight lines culminating in an elegant aerator. Crafted for durability and modern design needs, Haka 67692E is part of a versatile range that caters to diverse aesthetic preferences. A 3D file of the product is available for download, allowing for detailed visualization and integration into design projects. Newform, the Italian supplier behind this product, has been a pioneer in innovative bathroom and kitchen fixtures since its founding in 1983, renowned for blending functionality with cutting-edge design to create durable, high-performance solutions for both residential and commercial spaces.

PARK LIMITED EDITION 69776 - Recessed 2 hole shower tap _ newform

newform > Tap

The Park L.E. 69776 is a sophisticated concealed shower group featuring 1/2” in and out connections, designed to cater to both classical and contemporary tastes with its refined aesthetic. Available in two elegant finishes—62.093 Glossy Gold-Matt Black and 05.093 Chrome-Matt Black—this product is part of the LIMITED EDITION PARK collection, crafted for global markets. A 3D file of the product is available for download, offering detailed visualization for design planning. Manufactured by Newform, an Italian interior design leader since 1983, the company is renowned for its innovative, high-quality bathroom and kitchen fixtures that seamlessly blend functionality with modern, minimalist aesthetics, serving both residential and commercial spaces worldwide.

HAKA 72012 - Single handle washbasin mixer without waste _ newform

newform > Tap

The Haka 72012 is a sleek, single-lever basin mixer without a pop-up waste set, featuring 3/8" female connection hoses, designed to combine modern aesthetics with water-saving efficiency. Part of Newform's Save Water range, this mixer reduces water flow to 5 l/m, cutting water usage by up to 50% while maintaining performance, aligning with the company’s commitment to sustainability and environmental responsibility. Inspired by the dynamic Maori dance, the Haka design emphasizes strength, identity, and attention to detail, with its ergonomic handle, vertical knob movement, and a harmonious blend of curved and straight lines culminating in a refined aerator. A 3D file of the product is available for download, offering designers and architects the flexibility to integrate it into their projects seamlessly. Newform, an Italian interior design leader since 1983, is renowned for its innovative, high-quality bathroom and kitchen fixtures, blending functionality with timeless design to cater to both residential and commercial spaces globally.

X-STEEL 316 - Recessed stainless steel shower mixer with diverter _ newform

newform > Tap

The X-Steel 316 70426EX is a sophisticated two-way thermostatic concealed mixer featuring a single handle for precise temperature control and a convenient button for ON/OFF operation, designed for external installation and seamless integration with concealed body art (model 27751). Crafted from premium stainless steel, the X-STEEL 316 series embodies durability, inalterability, eco-friendliness, and hygiene, meeting the highest quality standards. A 3D file of the product is available for download, allowing for detailed visualization and planning. Newform, an esteemed Italian interior design supplier founded in 1983, is renowned for its innovative and stylish bathroom and kitchen fixtures, blending functionality with aesthetic appeal to cater to both residential and commercial spaces.

70402E - Recessed thermostatic shower mixer _ newform

newform > Tap

The 70402E is a sleek, two-way thermostatic concealed mixer featuring a single handle for precise temperature control and convenient ON/OFF buttons, designed for seamless integration with concealed body art (27751). This versatile product is part of the O'Rama, XT, Mini-X Pro, and Linfa II collections, offering a modern and minimalist aesthetic. A downloadable 3D file of the product is available for detailed visualization and planning. Manufactured by Newform, a renowned Italian interior design supplier established in 1983, the company is celebrated for its innovative, high-quality bathroom and kitchen fixtures that blend functionality with cutting-edge design, catering to both residential and commercial spaces worldwide.

O'RAMA - Shower tap _ newform

newform > Tap

Art. 68455 - Single-lever exposed shower mixer (without shower set) features a 35 mm ceramic disc cartridge, combining durability with smooth operation. Part of the O'RAMA product line by Newform, this collection redefines simplicity with its dynamic and essential design, characterized by a solid, upward-reaching structure that exudes power while maintaining balanced geometric lines. The minimalist yet elegant design, highlighted by a distinctive lever, gives the mixer an iconic and energetic appeal, placing it among the brand's top collections. Designed with harmonious lines and ease of use in mind, O'RAMA offers customizable options with various material and color combinations, including fully chromed finishes or levers in black matte or white lacquer, allowing it to seamlessly integrate into diverse interior design styles. A 3D file of the product is available for download, enabling precise planning and visualization. Newform, the Italian supplier behind this innovative product, has been a leader in interior design since 1983, renowned for blending cutting-edge aesthetics with functionality in their bathroom and kitchen fixtures, catering to both residential and commercial spaces worldwide.

MINI-X - Thermostatic Recessed shower mixer _ newform

newform > Tap

The 67608E is a thermostatic concealed mixer with 2/5 ways out, designed to seamlessly integrate with concealed parts such as art. 31061, 31020, 27888, and 27889, making it compatible with the XT and Mini-X Pro collections. For additional details, refer to the manufacturer's information on the MINI-X Newform series. A downloadable 3D file of the product is also available for precise planning and integration. Newform, an Italian interior design supplier founded in 1983, is renowned for its innovative and stylish bathroom and kitchen fixtures, blending functionality with modern aesthetics to cater to both residential and commercial spaces globally.

Dream 4 Sprays - LED LIGHTS - Contemporary style LED overhead shower _ Bossini

Bossini > Shower

Elevate your shower experience with the Dream/4 Shower Head, a ceiling-mounted masterpiece featuring four versatile spray modes—wide-rain, soft nebulized, powerful cascade, and natural Kneipp jet—alongside captivating LED lights, a low-voltage transformer, a control keyboard, and a flexible water connection. Designed for false ceiling installation (570 x 470 mm), this showerhead offers a multisensory journey into relaxation and well-being, perfect for creating a day-spa ambiance in your home. A standout feature is the built-in air suction duct, a Bossini-patented innovation that minimizes water stagnation by efficiently discharging residual water from the distribution chamber when the mixer is turned off. For added convenience, a downloadable 3D file of the product is available for planning and integration into your space. Bossini, an Italian interior design pioneer founded in 1958, is renowned for its innovative, high-quality products, including lighting, furniture, and accessories, which blend contemporary aesthetics with functionality for residential and commercial spaces worldwide.