R.01 by Dennebos Flooring

Collection

Dennebos Flooring > Accessories

Collection

Dennebos Flooring > Accessories

Kollektion

Dennebos Flooring > Accessories

D.03

Dennebos Flooring > Accessories

Die von Dennebos gefertigten Dielen haben eine Standardstärke von 17,5 mm (12 + 5,5 mm) und eine Länge zwischen 600 und 2700 mm. Der Anteil der Dielen unter 1500 mm sollte 20% der Gesamtmenge nicht überschreiten. Die Stärke von 20,5 mm (15+ 5,5 mm) ist auf Anfrage möglich. Dennebos Flooring Dielen sind geignet fur Verlegung auf Fussbodenheizung.

D.01

Dennebos Flooring > Accessories

Les parquets conçus par Dennebos ont une épaisseur standard de 17,5 mm [12 + 5,5 mm] et une longueur aléatoire comprise entre 600 et 2700 mm. Pourcentage de lames de moins de 1500 mm ne doit pas dépasser 20 % du total. L’épaisseur de 20,5 mm [15 + 5,5 mm] pour une utilisation structurelle est possible sur demande.

G.01

Dennebos Flooring > Accessories

Les parquets conçus par Dennebos ont une épaisseur standard de 17,5 mm [12 + 5,5 mm] et une longueur aléatoire comprise entre 600 et 2700 mm. Pourcentage de lames de moins de 1500 mm ne doit pas dépasser 20 % du total. L’épaisseur de 20,5 mm [15 + 5,5 mm] pour une utilisation structurelle est possible sur demande.

N.01

Dennebos Flooring > Accessories

Les parquets conçus par Dennebos ont une épaisseur standard de 17,5 mm [12 + 5,5 mm] et une longueur aléatoire comprise entre 600 et 2700 mm. Pourcentage de lames de moins de 1500 mm ne doit pas dépasser 20 % du total. L’épaisseur de 20,5 mm [15 + 5,5 mm] pour une utilisation structurelle est possible sur demande.

R.01

Dennebos Flooring > Accessories

Les revêtements de sol en bois récupérés Dennebos ont une épaisseur standard de 17.5 mm (12 mm de contreplaqué de bouleau + 5.5 mm chêne) et une largeur approximative de 220 mm. La longueur des lames est aléatoire entre 600 mm – 2700 mm. La longueur des lames inférieure à 1500 mm ne dépasse pas 20% du total. Au sein des parquets Dennebos nous pouvons trouver également une épaisseur de 20.5 mm à un coût additionnel.

S.01

Dennebos Flooring > Accessories

Les parquets conçus par Dennebos ont une épaisseur standard de 17,5 mm [12 + 5,5 mm] et une longueur aléatoire comprise entre 600 et 2700 mm. Pourcentage de lames de moins de 1500 mm ne doit pas dépasser 20 % du total. L’épaisseur de 20,5 mm [15 + 5,5 mm] pour une utilisation structurelle est possible sur demande.

D.02

Dennebos Flooring > Accessories

Les parquets conçus par Dennebos ont une épaisseur standard de 17,5 mm [12 + 5,5 mm] et une longueur aléatoire comprise entre 600 et 2700 mm. Pourcentage de lames de moins de 1500 mm ne doit pas dépasser 20 % du total. L’épaisseur de 20,5 mm [15 + 5,5 mm] pour une utilisation structurelle est possible sur demande.

D.03

Dennebos Flooring > Accessories

Les parquets conçus par Dennebos ont une épaisseur standard de 17,5 mm [12 + 5,5 mm] et une longueur aléatoire comprise entre 600 et 2700 mm. Pourcentage de lames de moins de 1500 mm ne doit pas dépasser 20 % du total. L’épaisseur de 20,5 mm [15 + 5,5 mm] pour une utilisation structurelle est possible sur demande.

D.04

Dennebos Flooring > Accessories

Les parquets conçus par Dennebos ont une épaisseur standard de 17,5 mm [12 + 5,5 mm] et une longueur aléatoire comprise entre 600 et 2700 mm. Pourcentage de lames de moins de 1500 mm ne doit pas dépasser 20 % du total. L’épaisseur de 20,5 mm [15 + 5,5 mm] pour une utilisation structurelle est possible sur demande.

D.05

Dennebos Flooring > Accessories

Les parquets conçus par Dennebos ont une épaisseur standard de 17,5 mm [12 + 5,5 mm] et une longueur aléatoire comprise entre 600 et 2700 mm. Pourcentage de lames de moins de 1500 mm ne doit pas dépasser 20 % du total. L’épaisseur de 20,5 mm [15 + 5,5 mm] pour une utilisation structurelle est possible sur demande.

D.06

Dennebos Flooring > Accessories

Les parquets conçus par Dennebos ont une épaisseur standard de 17,5 mm [12 + 5,5 mm] et une longueur aléatoire comprise entre 600 et 2700 mm. Pourcentage de lames de moins de 1500 mm ne doit pas dépasser 20 % du total. L’épaisseur de 20,5 mm [15 + 5,5 mm] pour une utilisation structurelle est possible sur demande.

D.01

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

G.01

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

N.01

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

R.01

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and an approximate width of 220 mm. Length specification is random between 600-2700 mm. Maximum of length under 1500 mm does not exceed 20% of total. Non-standard thickness of 20,5 mm for structural use available at additional cost. Dennebos engineered Reclaimed oak flooring is suitable for fitting upon an underfloorheating system.

S.01

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

D.02

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

D.03

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

D.04

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

D.05

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

D.06

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

N.03

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

N.02

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

G.10

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

G.09

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

G.08

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

G.07

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

G.06

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

G.05

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

G.04

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

G.03

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

G.02

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

D.10

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

D.09

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + ,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

D.08

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

D.07

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

N.03

Dennebos Flooring > Accessories

Les parquets conçus par Dennebos ont une épaisseur standard de 17,5 mm [12 + 5,5 mm] et une longueur aléatoire comprise entre 600 et 2700 mm. Pourcentage de lames de moins de 1500 mm ne doit pas dépasser 20 % du total. L’épaisseur de 20,5 mm [15 + 5,5 mm] pour une utilisation structurelle est possible sur demande.

Parquet Large DC521

Amtico > Synthetic Floor

Honey oak tones combine with a traditional Parquet pattern for a characterful and familiar floor.

D.06

Dennebos Flooring > Accessories

Les parquets conçus par Dennebos ont une épaisseur standard de 17,5 mm [12 + 5,5 mm] et une longueur aléatoire comprise entre 600 et 2700 mm. Pourcentage de lames de moins de 1500 mm ne doit pas dépasser 20 % du total. L’épaisseur de 20,5 mm [15 + 5,5 mm] pour une utilisation structurelle est possible sur demande.

R.01

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and an approximate width of 220 mm. Length specification is random between 600-2700 mm. Maximum of length under 1500 mm does not exceed 20% of total. Non-standard thickness of 20,5 mm for structural use available at additional cost. Dennebos engineered Reclaimed oak flooring is suitable for fitting upon an underfloorheating system.

D.03

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

D.04

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

D.05

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

D.06

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

N.02

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

G.02

Dennebos Flooring > Accessories

Dennebos engineered floorboards have a standard thickness of 17,5 mm [ 12 + 5,5 mm] and random length between 600- 2700 mm. Percentage of boards shorter than 1500 mm should not exceed 20% of the total. Thickness of 20,5 mm [ 15 + 5,5 mm] for structural use is possible on request. Dennebos engineered  flooring is suitable for fitting upon an underfloorheating system.

Contrafforti SB

PERI > Accessories

I contrafforti SB trasferiscono le sollecitazioni dovute alla pressione del calcestruzzo fresco al piano di appoggio o alle fondazioni. Scoprili qui.

MAXIMO Rahmenschalung

PERI > Accessories

Die MAXIMO Rahmenschalung mit der einseitig bedienbaren Ankertechnik kann stehend oder liegend eingesetzt werden, und verfügt über eine durchdachte Sicherheitstechnik. Mithilfe des Richtschlosses BFD sind Elementverbindungen bündig, fluchtend, dicht.

MESA COMEDOR Ø120

Fermob > Chair

Ensemble complet de douche thermostatique

BARIL > Tap

Ensemble avec 3 accessoires Max : 7,6 l/min (2 gpm) – 80 psi (accessoires) 22,8 l/min (6 gpm) pour 3 jets de corps Douchette 3 jets Boyau de 150 cm en PVC finis CC et KK ou en laiton pour les autres finis 3 accessoires peuvent fonctionner simultanément Les bruts et la finition peuvent être commandés séparément Finition seule : TRO-3950-46-xx Bruts de valve : RVA 3404-00-B (1x) et RVA-2719-34-B (3x)

Pina Chair

Sandalyeci > Chair

Pina Chair is a wood contract chair by Sandalyeci, 55 cm wide and 59 cm deep, 105 cm high, with a 48 cm seat height.

Beyti Chair

Sandalyeci > Chair

Beyti Chair is a wood contract chair by Sandalyeci, 50.5 cm wide and 59 cm deep, 90 cm high, with a 50 cm seat height.

Gabbana Chair

Sandalyeci > Chair

Gabbana Chair is a wood contract chair by Sandalyeci, 64 cm wide and 60 cm deep, 76 cm high, with a 46 cm seat height.

Giallo Chair

Sandalyeci > Chair

Giallo Chair is a wood contract chair by Sandalyeci, 45 cm wide and 53.5 cm deep, 99 cm high, with a 50 cm seat height.

Vass Desk

ASPLUND > Desk

Vass is an elegant desk designed by Claesson Koivisto Rune for ASPLUND Collection. It is made in oak veneer and has one hidden drawer.

Avail Coat Rack

Muuto > Accessories

Designed with Scandinavian materiality at its heart, the Avail Coat Rack brings the ideas of simplicity and functionality into the modern home. The design features 2 metal hooks that can be rearranged forever while also bringing hints of color to the form, allowing for the Avail Coat Rack to evolve as time passes while holding smaller objects on its minute plateau.

Jellies coat hangers (2 pieces)

Kartell > Accessories

The Jellies coat hangers draw their inspiration from the tableware collection of the same name designed by Patricia Urquiola for Kartell. This accessory is available in three different sizes, each with its own specific texture.

Karree Cosmetic mirror

Duravit > Accessories

3 times magnifier, 310 mm Design by Duravit

D-Code Spare roll holder

Duravit > Accessories

Design by sieger design

Starck T Glass holder

Duravit > Accessories

Accent colour: White Matt, Glass, Brass, Type of mounting: Wall-mounted, Position toothbrush holder: Right, Left Design by Philippe Starck

Universal Towel rail

Duravit > Accessories

LORO PIANA INTERIORS - Check rectangular wool cushion

Poltrona Frau > Accessories

Luxurious decorative cushions crafted from a blend of wool and cashmere (Altai) and high-quality Merino wool (Zelander® Check), offering both softness and durability. These cushions, part of the Poltrona Frau wears Loro Piana Interiors project, are designed by Poltrona Frau Style & Design Centre and feature classic check patterns. The edges are adorned with border piping and Pelle SC leather matching the fabric, while the back bears a label certifying the authenticity of the Loro Piana Inter...

JOURNEY - Rectangular leather cushion

Poltrona Frau > Accessories

The Journey Decorative Cushion Collection by Poltrona Frau, designed by Giulio Ridolfo in collaboration with Chiara Novello, offers a unique blend of culture and memory, capturing the essence of visited locations through a vibrant 3D-geometric weave. Crafted entirely from Pelle Frau SC leather, these cushions celebrate the Colorsphere® system with three distinct multi-color proposals: Pier 1 for greens, Tannery for natural leather tones, and Gion for shades of violet and dark blue. Notable f...

CLAYTON - Roll leather cushion

Poltrona Frau > Accessories

The Clayton series by Poltrona Frau, designed by Jean-Marie Massaud, offers a blend of traditional craftsmanship and modern aesthetics. This collection includes the Clayton swivel armchair and bench, featuring a cylindrical cushion available in Pelle Frau® leather or fabric. The leather cushion showcases distinctive 3D stitching, creating a tight weave of little diamonds. The sofa architecture is clear and light, with steel blade feet featuring a Ruthenium finish. The backrest and armrest pa...

PIPE - Stainless steel robe hook / towel rack

Boffi > Accessories

The Pipe Robe Hook is crafted from durable AISI 304 stainless steel, featuring a distinctive red handle similar to the Pipe taps. This accessory series extends to a toilet roll holder and multipurpose hooks for towels or bathrobes, suitable for both bathrooms and living spaces as design elements. The handles are coated with red epoxy powders for added durability. Designed by Marcel Wanders, the Pipe collection showcases an oversized, whimsical industrial aesthetic. For more detailed informati...

INDEX - Round wall-mounted shaving mirror

Boffi > Accessories

The Index wall-mounted mirror features a reversible design, combining both standard and magnification mirrors, creating an architectural sculpture with a characteristic cylindrical shape in satin stainless steel. With an external diameter of 220 mm and a thickness of 4 mm for the mirror and magnifying mirror, this wall-mounted mirror offers a rotatable two-sided design, providing both standard reflection and magnification capabilities. For more detailed specifications, please refer to the man...

MERCURY - Wall-mounted bathroom mirror

Boffi > Accessories

Product: Mercury Mirror Dimensions: 500x25 mm Materials: 4mm looking-glass with 20mm crystal plates, stainless steel frame support Style: Rounded and polished edges, depth effect created by crystal plates on mirror surface Use: Affixed with a 0.6mm stainless steel frame support for secure attachment

ANIMA - Standing towel rack

Salvatori > Accessories

The Anima collection by Glenn Pushelberg and George Yabu seamlessly blends the organic essence of clay with the refined elegance of marble, resulting in a series that embodies both sensuousness and spiritual qualities. Each piece is crafted from premium materials to ensure durability and longevity while maintaining its natural beauty. The construction of the Anima collection features meticulous attention to detail, showcasing gentle, sinuous curves that define every design element—from monumental bathtubs to an extensive range of accessories such as trinket boxes, pots, a tissue box, soap dish, valet tray, and small dishes. These pieces are designed with fluidity in mind, allowing for a more organic and less constrained aesthetic compared to traditional stone designs. The Anima collection is available in five distinct marble varieties: Bianco Carrara, Crema d’Orcia, Gris du Marais®, Pietra d'Avola, and Silk Georgette®. Each material offers unique characteristics that contribute to the overall design appeal of these pieces. The choice of materials not only enhances their aesthetic value but also ensures they can be seamlessly integrated into various interior settings. For those who wish to maintain the pristine condition of their Anima collection, proper care is essential. Regular cleaning with a mild soap and water solution followed by drying thoroughly will help preserve the natural beauty of these pieces. Avoid using harsh chemicals or abrasive materials that could damage the surface finish. Additionally, storing these items in a dry area when not in use can prevent any potential damage from moisture. The Anima collection is designed to complement both contemporary and traditional interiors, making it suitable for a wide range of applications including bathrooms, living rooms, bedrooms, and even as decorative elements within office spaces. Whether you're looking to enhance the aesthetic appeal of your home or workspace, the Anima collection offers an elegant solution that seamlessly integrates with existing decor. In summary, the Anima collection by Glenn Pushelberg and George Yabu is a testament to the harmonious blend of nature's raw beauty and sophisticated design elements. Each piece in this collection stands as a unique expression of form and function, designed to be cherished for generations to come.

QUADRO - Rectangular wall-mounted mirror

Salvatori > Accessories

The Quadro mirror by Salvatori is distinguished by its burnished brass frame, which extends to 7.5 cm in depth. This substantial feature not only elevates the aesthetic appeal of any space but also offers a practical solution for bathroom environments where it can serve as a handy ledge for storing small items or accessories. Available in three distinct sizes, the Quadro mirror is versatile enough to be hung both horizontally and vertically, making it suitable for various room configurations. Designed with modern elegance in mind, the Quadro mirror features clean lines and a minimalist style that seamlessly blends into contemporary interiors. Its burnished brass frame adds a touch of sophistication while its sleek design ensures minimal visual impact on the surrounding decor. The reflective surface is crafted to provide high-quality illumination, enhancing any space's ambiance. The Quadro mirror is ideal for both residential and commercial applications. In homes, it can be installed in bathrooms or as an accent piece in living rooms, bedrooms, or entryways. Commercially, its versatility makes it a popular choice for hotel lobbies, office spaces, or retail environments where it serves not only as a functional accessory but also adds a touch of style. To maintain the Quadro mirror's pristine condition and longevity, proper care is essential. Regular cleaning with a soft cloth dampened in lukewarm water can help remove dust and fingerprints without scratching the reflective surface. Avoid using harsh chemicals or abrasive materials that could damage the burnished brass frame over time. For deeper cleaning, consider using a mild glass cleaner specifically designed for mirrors. The Quadro mirror is an excellent choice for those seeking to add both style and functionality to their space. Its burnished brass frame not only enhances visual appeal but also provides practical benefits in bathroom settings. Whether hung horizontally or vertically, the Quadro mirror can be seamlessly integrated into various room designs, making it a versatile addition that complements modern interiors beautifully.

YOUNG - 7655 - Countertop shaving mirror

Fantini Rubinetti > Accessories

Discover a sleek and functional magnifying mirror with this stylish free-standing design. Crafted from high-quality materials, the mirror features a diameter of 20 cm and is available in three distinct finishes: Chrome, Matt Black, and Brushed Stainless Steel. This versatile piece offers both aesthetic appeal and practical utility. The construction is robust yet lightweight, ensuring durability while maintaining ease of use. The design incorporates elegant style with its contemporary look that complements various interior aesthetics. Features such as a magnifying glass enhance the mirror's functionality for tasks requiring detailed observation or precision work. This magnifying mirror is ideal for applications in bathrooms, dressing rooms, and even home offices where precise measurements are necessary. Its compact size allows it to be easily integrated into any space without compromising on style or utility. For optimal performance and longevity, follow these care tips: avoid direct exposure to extreme temperatures; clean with a soft cloth and mild soap solution when needed to maintain its pristine appearance. Regular maintenance will help preserve the finish of your magnifying mirror for years to come. The Fantini Rubinetti brand offers further information on this product, providing insights into its design philosophy and construction techniques that contribute to its quality and functionality.