Uncover Chaise longue by Cinna

Sandra Medium settee with lumbar cushions

Cinna > Accessories

STRUCTURE Entirely made of foam with 2 different densities: polyether 21 kg/m3 - 3.2 kPa and polyether 28 kg/m3 - 4.8 kPa. COMFORT The seat and back are made of high-resilience Bultex polyurethane foam (36 kg/m3 - 2.8 kPa and 38 kg/m3 - 2.8 kPa). Entirely clad in ultra-soft polyurethane foam (45 kg/m3 - 1.8 kPa). Each item (except the footstool and armchair) comes with a lumbar cushion. MAKING-UP Cover clad with 480 g/m² polyester quilting, single-needle stitching. Covers may be removed by a professional.

Sandra Large settee with lumbar cushions

Cinna > Accessories

STRUCTURE Entirely made of foam with 2 different densities: polyether 21 kg/m3 - 3.2 kPa and polyether 28 kg/m3 - 4.8 kPa. COMFORT The seat and back are made of high-resilience Bultex polyurethane foam (36 kg/m3 - 2.8 kPa and 38 kg/m3 - 2.8 kPa). Entirely clad in ultra-soft polyurethane foam (45 kg/m3 - 1.8 kPa). Each item (except the footstool and armchair) comes with a lumbar cushion. MAKING-UP Cover clad with 480 g/m² polyester quilting, single-needle stitching. Covers may be removed by a professional.

Prado 2 Medium settee

Cinna > Sofa

STRUCTURE AND COMFORT The structure is composed of three-layer, crossed, webbed panels of chipboard clad with a polyether foam with a density of 40 kg/m³. The seat is made of high-resilience Bultex polyurethane foam, with densities of 36 kg/m³ and 38 kg/m³, and a resistance of 2.8 kPa. The back cushion is made of injected foam with a density of 60 kg/m³, moulded onto a metal insert equipped with elastic webbing with a new compartmented goose feather filling, composed of 10% down and 90% feathers, as well as a layer of 110 g/m² polyester quilting. Anti-slip system. The lumbar cushion is filled with new goose feathers, with a ratio of 10% down and 90% feathers. The optional armrest cushion is made of high-resilience Bultex polyurethane foam with a density of 35 kg/m³ and clad with 200 g/m² polyester quilting. MAKING-UP The quilted version features a quilted cover, sewn crosswise, without any seams on the seat. A single seam runs through the centre, but it's located on the settee’s structure. In this version, the cushion cannot be turned over to transform it into a bed, and the base is now a single piece. The setttee’s base is identical to that of the original Prado. Leather is not suitable due to the quilting being too fragmented. The back benefits from an anti-slip system and remains identical to that of the Prado. As with the latter, some fabric options will be limited for the bases.

Prado 2 Large settee depth 125

Cinna > Sofa

STRUCTURE AND COMFORT The structure is composed of three-layer, crossed, webbed panels of chipboard clad with a polyether foam with a density of 40 kg/m³. The seat is made of high-resilience Bultex polyurethane foam, with densities of 36 kg/m³ and 38 kg/m³, and a resistance of 2.8 kPa. The back cushion is made of injected foam with a density of 60 kg/m³, moulded onto a metal insert equipped with elastic webbing with a new compartmented goose feather filling, composed of 10% down and 90% feathers, as well as a layer of 110 g/m² polyester quilting. Anti-slip system. The lumbar cushion is filled with new goose feathers, with a ratio of 10% down and 90% feathers. The optional armrest cushion is made of high-resilience Bultex polyurethane foam with a density of 35 kg/m³ and clad with 200 g/m² polyester quilting. MAKING-UP The quilted version features a quilted cover, sewn crosswise, without any seams on the seat. A single seam runs through the centre, but it's located on the settee’s structure. In this version, the cushion cannot be turned over to transform it into a bed, and the base is now a single piece. The setttee’s base is identical to that of the original Prado. Leather is not suitable due to the quilting being too fragmented. The back benefits from an anti-slip system and remains identical to that of the Prado. As with the latter, some fabric options will be limited for the bases.

Prado Large settee depth 120

Cinna > Sofa

CONSTRUCTION & COMFORT Structure in panels of chipboard, webbed and clad in foam 50 kg/m³ and 110 g/m² quilting; seat cushion in polyurethane foam 36 kg/m³ and 110 g/m² quilting. Back cushion in injected foam 60 kg/m³ moulded onto a metal insert, equipped with elastic webbing and with a compartmented goose feather-filled comfort layer (10 % down / 90 % feathers) with 110 g/m² quilting. Anti-slip system. Lumbar cushion filled with new goose feathers (10 % down / 90 % feathers). Optional armrest cushion in polyurethane foam 35 kg/m³ and 200 g/m² quilting. The reverse of the seat cushion is covered in mattress ticking: simply turn the cushion and use the optional 100 % white cotton fitted sheet to create a comfortable sleep area (width 100 or 120 cm). With the exception of the base in leather or microfibre, all elements of the model PRADO have removable covers. The Oda pedestal table (designed to slide above the seat cushion thanks to their cantilevered tops) is designed as the perfect complement to this settee, making it possible to create corner compositions, for example, or to add occasional tables on which one can place one's personal effects.

Prado Medium settee - d 120

Cinna > Sofa

CONSTRUCTION & COMFORT Structure in panels of chipboard, webbed and clad in foam 50 kg/m³ and 110 g/m² quilting; seat cushion in polyurethane foam 36 kg/m³ and 110 g/m² quilting. Back cushion in injected foam 60 kg/m³ moulded onto a metal insert, equipped with elastic webbing and with a compartmented goose feather-filled comfort layer (10 % down / 90 % feathers) with 110 g/m² quilting. Anti-slip system. Lumbar cushion filled with new goose feathers (10 % down / 90 % feathers). Optional armrest cushion in polyurethane foam 35 kg/m³ and 200 g/m² quilting. The reverse of the seat cushion is covered in mattress ticking: simply turn the cushion and use the optional 100 % white cotton fitted sheet to create a comfortable sleep area (width 100 or 120 cm). With the exception of the base in leather or microfibre, all elements of the model PRADO have removable covers. The Oda pedestal table (designed to slide above the seat cushion thanks to their cantilevered tops) is designed as the perfect complement to this settee, making it possible to create corner compositions, for example, or to add occasional tables on which one can place one's personal effects.

Prado Medium settee - d 100

Cinna > Sofa

CONSTRUCTION & COMFORT Structure in panels of chipboard, webbed and clad in foam 50 kg/m³ and 110 g/m² quilting; seat cushion in polyurethane foam 36 kg/m³ and 110 g/m² quilting. Back cushion in injected foam 60 kg/m³ moulded onto a metal insert, equipped with elastic webbing and with a compartmented goose feather-filled comfort layer (10 % down / 90 % feathers) with 110 g/m² quilting. Anti-slip system. Lumbar cushion filled with new goose feathers (10 % down / 90 % feathers). Optional armrest cushion in polyurethane foam 35 kg/m³ and 200 g/m² quilting. The reverse of the seat cushion is covered in mattress ticking: simply turn the cushion and use the optional 100 % white cotton fitted sheet to create a comfortable sleep area (width 100 or 120 cm). With the exception of the base in leather or microfibre, all elements of the model PRADO have removable covers. The Oda pedestal table (designed to slide above the seat cushion thanks to their cantilevered tops) is designed as the perfect complement to this settee, making it possible to create corner compositions, for example, or to add occasional tables on which one can place one's personal effects.

Prado Square settee

Cinna > Sofa

CONSTRUCTION & COMFORT Structure in panels of chipboard, webbed and clad in foam 50 kg/m³ and 110 g/m² quilting; seat cushion in polyurethane foam 36 kg/m³ and 110 g/m² quilting. Back cushion in injected foam 60 kg/m³ moulded onto a metal insert, equipped with elastic webbing and with a compartmented goose feather-filled comfort layer (10 % down / 90 % feathers) with 110 g/m² quilting. Anti-slip system. Lumbar cushion filled with new goose feathers (10 % down / 90 % feathers). Optional armrest cushion in polyurethane foam 35 kg/m³ and 200 g/m² quilting. The reverse of the seat cushion is covered in mattress ticking: simply turn the cushion and use the optional 100 % white cotton fitted sheet to create a comfortable sleep area (width 100 or 120 cm). With the exception of the base in leather or microfibre, all elements of the model PRADO have removable covers. The Oda pedestal table (designed to slide above the seat cushion thanks to their cantilevered tops) is designed as the perfect complement to this settee, making it possible to create corner compositions, for example, or to add occasional tables on which one can place one's personal effects.

Prado cadence Large settee depth 120

Cinna > Sofa

CONFIGURATION OF THE MODEL PRADO ÉDITION SPÉCIALE : - Base part A (upper section) : mattress upholstered in the exclusive fabric CADENCE Nature. A new, elegant and resistant covering material, elevated by dynamic lines and soft, natural shades. A fabric which affirms a strong, contemporary visual identity, exclusive to this version of PRADO. Composition : 58% polyester/42% polyacrylic – resistance to wear : 16,000 Martindale revolutions - lightfastness : 6–7 – tear test : 130 N / 290 N - weight : 1 194 g/ml. - Base part B (lower section), back cushions and bolsters exclusively upholstered in SCAN beige. A natural, soothing tone, ideal for a soft, contemporary ambiance.

Kobold soft Chaise longue with armrest

Cinna > Chair

STRUCTURE Seat frame in spruce plywood panels, clad in ash veneered MDF panel. Armrests and back structure in ash veneered MDF, clad in Bultex foam (48kg/m3 – 7.1kPa) and 110g/m² polyester quilting. Base in stained ash and for hidden areas in black lacquered beech. COMFORT The seat is composed of pocket springs and Bultex high resilience polyurethane foam (38 kg/m3 - 3.6 kPa): for the part integrated into the seat frames. The seat cushion is made of Bultex foam (38 kg/m3 – 3.6 kPa) with goose feathers and clad in 110 g/m² polyester quilting. Parallel bedding of 200x90 supplied with a mattress protector. The comfort of the backrests is achieved by a set of backrest cushions and kidney wedges, all in goose feathers. The comfort of the backs is achieved by a set of back cushions and bolsters in goose feathers. CONSTRUCTION Two satin stitches on the seat cushion. Cover may be removable by a professional. When the model KOBOLD SOFT is made up in ALPA, the bourdon point stitching on the seat is replaced by straight stitch.

Kobold classic 1-armed settee with short unit

Cinna > Sofa

STRUCTURE Seat frame in spruce plywood panels, clad in ash veneered MDF panel. Armrests and back structure in ash veneered MDF, clad in Bultex foam (48kg/m3 – 7.1kPa) and 110g/m² polyester quilting. Base in stained ash and for hidden areas in black lacquered beech. COMFORT The seat is composed of pocket springs and Bultex high resilience polyurethane foam (38 kg/m3 - 3.6 kPa): for the part integrated into the seat frames. The seat cushion is made of Bultex foam (36 kg/m3 – 2.8 kPa + 38kg/m3 – 2.8 kPa) and clad in 110 g/m² polyester quilting. Parallel bedding of 200x90. The comfort of the backs is achieved by a set of back cushions in Bultex foam (38kg/m3 – 2.8 kPa) + goose feathers and bolsters in goose feathers. CONSTRUCTION Two satin stitches on the seat cushion. Double piping on the seat and back cushions, simple piping on the lumbar cushions. Cover may be removable by a professional. When the model KOBOLD CLASSIC is made up in ALCANTARA, ALPA, DIVA, SOFT TOUCH, the bourdon point stitching on the seat is replaced by straight stitch.

Ottoman Large settee

Cinna > Sofa

CONSTRUCTION Base and external section in polyether foam 28 kg/m³ - 4.8 kPa. Armchairs are available in fixed or rotating versions (with base in 6 mm thick steel, finished in Epoxy black lacquer). COMFORT Enveloping 'bucket seat'-style seat and back in moulded polyurethane foam 35 kg/m³ - 3.2 kPa, with comfort layer in high resilience polyurethane Bultex foam 38 kg/m³ - 3.6 kPa. MAKING-UP Cover is removable (by a professional) and is held in place by lacings at the junction of the seat and back, and by gripper strips on the underside. Cover quilted with polyether foam on the seat/back section, and with 100g/m² polyester quilting on the vertical exterior. Important : the swivelling armchair does not have removable covers.

Ottoman Small settee

Cinna > Sofa

CONSTRUCTION Base and external section in polyether foam 28 kg/m³ - 4.8 kPa. Armchairs are available in fixed or rotating versions (with base in 6 mm thick steel, finished in Epoxy black lacquer). COMFORT Enveloping 'bucket seat'-style seat and back in moulded polyurethane foam 35 kg/m³ - 3.2 kPa, with comfort layer in high resilience polyurethane Bultex foam 38 kg/m³ - 3.6 kPa. MAKING-UP Cover is removable (by a professional) and is held in place by lacings at the junction of the seat and back, and by gripper strips on the underside. Cover quilted with polyether foam on the seat/back section, and with 100g/m² polyester quilting on the vertical exterior. Important : the swivelling armchair does not have removable covers.

Saparella Settee

Cinna > Sofa

CONSTRUCTION Base and sides in polyether foam 28kg/m3 - 4.8kPa. The three items sit on a ventilated fabric base. COMFORT Seat and back made from high resilience polyurethane Bultex foam (36kg/m3 - 3.2 kPa), clad in a comfort layer of high resilience polyurethane Bultex foam (38 kg/m3 - 3.6 kPa). MAKING-UP Cover quilted with 200g/m² polyester. 5mm baguette stitch. Removable covers. Important: no baguette stitch when model is upholstered in BYRAM, ELLA, FESTA, LHUIS or TONA.

G10 Settee upholstered arms

Cinna > Sofa

STRUCTURE Back composed of plywood panels clad with polyurethane foam and 110 g/m² polyester quilting. Mechanically-soldered base in Epoxy black lacquer finish. Armrests in moulded beech plywood with stained ash veneer. COMFORT Suspension of seat via elastic webbing. The seat and back are made of high resilience polyurethane Bultex foam (38 kg/m3 - 3,6 kPa and 38 kg/m3 - 2,8 kPa). 110 g/m² polyester quilting.

G10 Settee wood arms

Cinna > Sofa

STRUCTURE Back composed of plywood panels clad with polyurethane foam and 110 g/m² polyester quilting. Mechanically-soldered base in Epoxy black lacquer finish. Armrests in moulded beech plywood with stained ash veneer. COMFORT Suspension of seat via elastic webbing. The seat and back are made of high resilience polyurethane Bultex foam (38 kg/m3 - 3,6 kPa and 38 kg/m3 - 2,8 kPa). 110 g/m² polyester quilting.

Pukka Medium settee

Cinna > Sofa

CONSTRUCTION : Foams of various densities and a base of high resilience polyurethane foam (48 kg/m3 – 7.1 kPa). COMFORT : The back is composed of high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa) clad in ultra-flexible polyurethane foam (50 kg/m3 – 1.8 kPa). The seat is composed of high resilience polyurethane Bultex foam (38 kg/m3 – 3.6 kPa et 38 kg/m3 – 2.8 kPa) clad in ultra-flexible polyurethane foam (50 kg/m3 – 1.8 kPa) MAKING-UP : Fabrics with elastic properties must be selected. Cover may be removed by a professional.

Paipaï Large settee

Cinna > Sofa

CONSTRUCTION Settee and love seat: structure of seat and back in mechanically-soldered steel. Structure of armrest in technical fabric for flexibility. A sheet of steel forms the joint between seat and armrest. The screws are visible and make a nice aesthetic touch. Footstool : structure of seat in panels of multi-ply. Structure clad in polyether foam and high resilience polyurethane Bultex foam. The entire structure is clad in 100 g/m² and 200g/m² polyester quilting. Legs in matt black steel Ø 18 mm. COMFORT Settee and love seat : suspension of seat and back via elastic webbing. Structure of seat in high resilience Bultex foam (38 kg/m3 - 3.6 kPa), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and 200 g/m² polyester quilting. Back in high resilience Bultex foam (38 kg/m3 - 3.6 kPa,), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and polyester quilting (200 g/m² and 100 g/m²). Lumbar cushion (660 x 300mm) filled with goose feathers. Footstool : structure of seat in high resilience Bultex foam (38 kg/m3 - 3.6 kPa), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and 200 g/m² polyester quilting. MAKING-UP Structure of back: 5 mm bourrelet stitch. Removable covers in both fabric and leather. Covering material recommendations: Harald, Gandino, Match, Canvas, leathers.

Paipaï Medium settee

Cinna > Sofa

CONSTRUCTION Settee and love seat: structure of seat and back in mechanically-soldered steel. Structure of armrest in technical fabric for flexibility. A sheet of steel forms the joint between seat and armrest. The screws are visible and make a nice aesthetic touch. Footstool : structure of seat in panels of multi-ply. Structure clad in polyether foam and high resilience polyurethane Bultex foam. The entire structure is clad in 100 g/m² and 200g/m² polyester quilting. Legs in matt black steel Ø 18 mm. COMFORT Settee and love seat : suspension of seat and back via elastic webbing. Structure of seat in high resilience Bultex foam (38 kg/m3 - 3.6 kPa), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and 200 g/m² polyester quilting. Back in high resilience Bultex foam (38 kg/m3 - 3.6 kPa,), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and polyester quilting (200 g/m² and 100 g/m²). Lumbar cushion (660 x 300mm) filled with goose feathers. Footstool : structure of seat in high resilience Bultex foam (38 kg/m3 - 3.6 kPa), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and 200 g/m² polyester quilting. MAKING-UP Structure of back: 5 mm bourrelet stitch. Removable covers in both fabric and leather. Covering material recommendations: Harald, Gandino, Match, Canvas, leathers.

LARGE SETTEE WITH ARMREST B

Cinna > Curtain

LARGE ASYMMETRICAL SETTEE

Cinna > Curtain

Exclusif Small settee with armrest b

Cinna > Sofa

CONSTRUCTION & COMFORT The structure is mainly in multi-ply, thus making a significant reduction in terms of weight. For optimum comfort the seat cushion is supported by a webbed suspension. IMPORTANT: POSSIBILITY OF 2 DIFFERENT FOOT HEIGHTS: 30 mm OR 65 mm. PLEASE SPECIFY YOUR CHOICE WHEN PLACING YOUR ORDER. Feather-filled seat and back cushions (10% feathers/90% down), compressibility H 88 mm with compartmented liner on the seat, both with a core of high resilience polyurethane Bultex foam (30 kg/m³ - 1.8 kPa). Flat edges of seat cushions are quilted with a layer of polyester (200 g/m²). Seat cushions are anchored to the frame by a combination of zip fastenings. 57 x 57 cm cushion filled with 100% duck feathers. For a firmer level of comfort, seat cushions may be made entirely from high resilience polyurethane Bultex foam (dominant 2.6 kPa) : please specify when placing order. Headrest comprising a base in chromed steel wire (Ø 10 mm) clad in high resilience polyurethane Bultex foam (dominant 38 kg/m³ - 3.6 kPa) and 300 g/m² polyester quilting. MAKING-UP Removable cushion covers. Removable frame cover (NB except microfibres or leather), although is necessary to remove the armrests in order to do so - this can be done without difficulty. Bicolour interpretations may be created by specifying a different colour/fabric for the back and lumbar cushions. In the case of the large settees (with and without arms), large 1-arm settees and large asymmetrical settees, each ite

Exclusif Large asymmetrical settee

Cinna > Sofa

CONSTRUCTION & COMFORT The structure is mainly in multi-ply, thus making a significant reduction in terms of weight. For optimum comfort the seat cushion is supported by a webbed suspension. IMPORTANT: POSSIBILITY OF 2 DIFFERENT FOOT HEIGHTS: 30 mm OR 65 mm. PLEASE SPECIFY YOUR CHOICE WHEN PLACING YOUR ORDER. Feather-filled seat and back cushions (10% feathers/90% down), compressibility H 88 mm with compartmented liner on the seat, both with a core of high resilience polyurethane Bultex foam (30 kg/m³ - 1.8 kPa). Flat edges of seat cushions are quilted with a layer of polyester (200 g/m²). Seat cushions are anchored to the frame by a combination of zip fastenings. 57 x 57 cm cushion filled with 100% duck feathers. For a firmer level of comfort, seat cushions may be made entirely from high resilience polyurethane Bultex foam (dominant 2.6 kPa) : please specify when placing order. Headrest comprising a base in chromed steel wire (Ø 10 mm) clad in high resilience polyurethane Bultex foam (dominant 38 kg/m³ - 3.6 kPa) and 300 g/m² polyester quilting. MAKING-UP Removable cushion covers. Removable frame cover (NB except microfibres or leather), although is necessary to remove the armrests in order to do so - this can be done without difficulty. Bicolour interpretations may be created by specifying a different colour/fabric for the back and lumbar cushions. In the case of the large settees (with and without arms), large 1-arm settees and large asymmetrical settees, each ite

Exclusif Small asymmetrical settee

Cinna > Sofa

CONSTRUCTION & COMFORT The structure is mainly in multi-ply, thus making a significant reduction in terms of weight. For optimum comfort the seat cushion is supported by a webbed suspension. IMPORTANT: POSSIBILITY OF 2 DIFFERENT FOOT HEIGHTS: 30 mm OR 65 mm. PLEASE SPECIFY YOUR CHOICE WHEN PLACING YOUR ORDER. Feather-filled seat and back cushions (10% feathers/90% down), compressibility H 88 mm with compartmented liner on the seat, both with a core of high resilience polyurethane Bultex foam (30 kg/m³ - 1.8 kPa). Flat edges of seat cushions are quilted with a layer of polyester (200 g/m²). Seat cushions are anchored to the frame by a combination of zip fastenings. 57 x 57 cm cushion filled with 100% duck feathers. For a firmer level of comfort, seat cushions may be made entirely from high resilience polyurethane Bultex foam (dominant 2.6 kPa) : please specify when placing order. Headrest comprising a base in chromed steel wire (Ø 10 mm) clad in high resilience polyurethane Bultex foam (dominant 38 kg/m³ - 3.6 kPa) and 300 g/m² polyester quilting. MAKING-UP Removable cushion covers. Removable frame cover (NB except microfibres or leather), although is necessary to remove the armrests in order to do so - this can be done without difficulty. Bicolour interpretations may be created by specifying a different colour/fabric for the back and lumbar cushions. In the case of the large settees (with and without arms), large 1-arm settees and large asymmetrical settees, each ite

Uncover Large settee version b – stretch fabrics

Cinna > Sofa

CONSTRUCTION An assembly of varying densities of high resilience polyurethane Bultex foam and polyether foam (base). Frame of footstool in 3-layer particleboard, with black polypropylene gliders. COMFORT Structure in high resilience Bultex foam (36kg/m3 - 2.7 kPa, 38 kg/m3 - 3.6 kPa). Base in polyether foam (28 kg/m3 - 4.8kPa, 34 kg/m3 - 6.4 kPa). Core of settee armrests in moulded foam, density 42 kg/m3 – 48 kPa. The entire structure is clad in 110 g/m² polyester quilting. Settees are equipped with a feather-filled cushion (40 cm x 40 cm) as standard, covered in the same covering material/colour as the main cover, but without the stitched motif. This cushion is also priced separately should more be required. MAKING-UP Only stretch fabrics may be used. Fully removable covers. IMPORTANT : When the model UNCOVER (except armchair) is upholstered in ARDA, CAPA, MILLA or MOSAÏC 2 there is a transversal seam on the rear of the back.

Uncover Medium settee version b – stretch fabrics

Cinna > Sofa

CONSTRUCTION An assembly of varying densities of high resilience polyurethane Bultex foam and polyether foam (base). Frame of footstool in 3-layer particleboard, with black polypropylene gliders. COMFORT Structure in high resilience Bultex foam (36kg/m3 - 2.7 kPa, 38 kg/m3 - 3.6 kPa). Base in polyether foam (28 kg/m3 - 4.8kPa, 34 kg/m3 - 6.4 kPa). Core of settee armrests in moulded foam, density 42 kg/m3 – 48 kPa. The entire structure is clad in 110 g/m² polyester quilting. Settees are equipped with a feather-filled cushion (40 cm x 40 cm) as standard, covered in the same covering material/colour as the main cover, but without the stitched motif. This cushion is also priced separately should more be required. MAKING-UP Only stretch fabrics may be used. Fully removable covers. IMPORTANT : When the model UNCOVER (except armchair) is upholstered in ARDA, CAPA, MILLA or MOSAÏC 2 there is a transversal seam on the rear of the back.

Uncover Chaise longue

Cinna > Chair

CONSTRUCTION An assembly of varying densities of high resilience polyurethane Bultex foam and polyether foam (base). Frame of footstool in 3-layer particleboard, with black polypropylene gliders. COMFORT Structure in high resilience Bultex foam (36kg/m3 - 2.7 kPa, 38 kg/m3 - 3.6 kPa). Base in polyether foam (28 kg/m3 - 4.8kPa, 34 kg/m3 - 6.4 kPa). Core of settee armrests in moulded foam, density 42 kg/m3 – 48 kPa. The entire structure is clad in 110 g/m² polyester quilting. Settees are equipped with a feather-filled cushion (40 cm x 40 cm) as standard, covered in the same covering material/colour as the main cover, but without the stitched motif. This cushion is also priced separately should more be required. MAKING-UP Only stretch fabrics may be used. Fully removable covers. IMPORTANT : When the model UNCOVER (except armchair) is upholstered in ARDA, CAPA, MILLA or MOSAÏC 2 there is a transversal seam on the rear of the back.

Plumy Large settee

Cinna > Sofa

CONSTRUCTION Structuring base in polyether foam (28kg/m3 - 4.0 kPa). COMFORT Seat and back in high resilience polyurethane Bultex foam (38 kg/m3 - 3.6 kPa). Seat and back cushions : filled with goose feathers (85% feathers /15% down), with compartmented liner. MAKING-UP Fully removable cover, quilted with 200/m² polyester. Reverse of cushions available in 2 versions : in cloth, or upholstered in the main covering material. Choice of 3 colours for the zips (always matched to the cloth backing in the case of the version with cloth backing : matt black, pearl grey or ivory - please specify your choice when placing your order.

Plumy Medium settee

Cinna > Sofa

CONSTRUCTION Structuring base in polyether foam (28kg/m3 - 4.0 kPa). COMFORT Seat and back in high resilience polyurethane Bultex foam (38 kg/m3 - 3.6 kPa). Seat and back cushions : filled with goose feathers (85% feathers /15% down), with compartmented liner. MAKING-UP Fully removable cover, quilted with 200/m² polyester. Reverse of cushions available in 2 versions : in cloth, or upholstered in the main covering material. Choice of 3 colours for the zips (always matched to the cloth backing in the case of the version with cloth backing : matt black, pearl grey or ivory - please specify your choice when placing your order.

Murtoli Settee

Cinna > Sofa

STRUCTURE Structure of seat: mechanically-soldered frame. The invisible screws under the base are grey for the outdoor version and black for the indoor version. Structure of backrest cushion: ABS plate (outdoor) or panel of particleboard (indoor). The back cushions of the indoor and outdoor versions have the same weight. COMFORT Suspension via polypropylene slats reinforced with fibreglass. The seat is composed of high resilience polyurethane Bultex foam (38 kg/m3 – 3.6 kPa and 38 kg/m3 – 2.8 kPa). The back cushion is composed of high resilience polyurethane Bultex foam (42 kg/m3 – 4.8 kPa and 26 kg/m3 – 1.4 kPa) clad in ultra-flexible foam (45 kg/m3 – 1.8 kPa). Its interior is fitted with an anti-slip system. The bolster is made from high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa). COVER Covers quilted with 110 g/m² polyester. Baguette stitching and twin-needle stitching on seat and back cushions ; baguette stitching on bolster. Covers may be removed by a professional, except for a base in leather or microfibre.

Amédée Settee

Cinna > Sofa

CONSTRUCTION structure of seat in 3-layer particleboard ; structure of back in thermoformed ABS. Base in black MDF panels in the case of the settee and fixed armchair, or in 8 mm thick Epoxy black lacquered steel in the case of the rotating armchair. In the case of the footstool, the structure is in 3-layer particleboard. COMFORT elastic webbing and high resilience polyurethane foam (36 kg/m3 - 2.8 kPa) on the seat. High resilience polyurethane foam (26 kg/m3 - 1.4 kPa) on the back. Polyurethane foam (38 kg/m3 - 3.6 kPa) for the footstool. MAKING-UP cover quilted with 110g/m² polyester with, baguette stitch detailing; cover may be removed by a professional. Lumbar and armrest cushions are integral to the cover: they are stitched every 5 cm and quilted with ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa).

Grand angle Large settee with broad armrest without lumbar cushion

Cinna > Accessories

CONSTRUCTION Structure of seat: webbed metal frame. Structure of backrest : panels 3-layer plywood with articulated headrest. Armrest composed of panels of plywood. COMFORT Seat composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa) and ultra-flexible foam (45 kg/m3 – 1.8 kPa) with comfort layer of feathers (goose feathers, of which 15% down). Backrest composed of high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa) clad in ultra-flexible foam (45 kg/m3 – 1.8 kPa). Feather-filled back (lumbar) cushion (goose feathers, of which 15% down). MAKING-UP Backrest quilted with stretch fabric to retain pleating on rear of backrest. Cover quilted with 110 g/m² polyester.

Grand angle Large settee with slim armrest without lumbar cushion

Cinna > Accessories

CONSTRUCTION Structure of seat: webbed metal frame. Structure of backrest : panels 3-layer plywood with articulated headrest. Armrest composed of panels of plywood. COMFORT Seat composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa) and ultra-flexible foam (45 kg/m3 – 1.8 kPa) with comfort layer of feathers (goose feathers, of which 15% down). Backrest composed of high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa) clad in ultra-flexible foam (45 kg/m3 – 1.8 kPa). Feather-filled back (lumbar) cushion (goose feathers, of which 15% down). MAKING-UP Backrest quilted with stretch fabric to retain pleating on rear of backrest. Cover quilted with 110 g/m² polyester.

Grand angle Small settee with slim armrest without lumbar cushion

Cinna > Accessories

CONSTRUCTION Structure of seat: webbed metal frame. Structure of backrest : panels 3-layer plywood with articulated headrest. Armrest composed of panels of plywood. COMFORT Seat composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa) and ultra-flexible foam (45 kg/m3 – 1.8 kPa) with comfort layer of feathers (goose feathers, of which 15% down). Backrest composed of high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa) clad in ultra-flexible foam (45 kg/m3 – 1.8 kPa). Feather-filled back (lumbar) cushion (goose feathers, of which 15% down). MAKING-UP Backrest quilted with stretch fabric to retain pleating on rear of backrest. Cover quilted with 110 g/m² polyester.

Telen Module a

Cinna > Curtain

CONSTRUCTION Structure of seat : 3-layer plywood. Structure of back cushion: panel of particleboard. COMFORT The seat is composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa and 38 kg/m3 – 2.8 kPa) clad in 110 g/m² polyester quilting. The back cushion is composed of high resilience polyurethane Bultex foam (42 kg/m3 – 4.8 kPa and 26 kg/m3 – 1.4 kPa) clad in ultra-flexible polyurethane foam (45 kg/m3 – 1.8 kPa). Anti-slip system on lower face. Clad in 110 g/m² polyester quilting. MAKING-UP Twin-needle stitching on seat ; baguette and twin-needle stitching on the back cushion. Covers may be removed by a professional.

Telen Module b2

Cinna > Curtain

CONSTRUCTION Structure of seat : 3-layer plywood. Structure of back cushion: panel of particleboard. COMFORT The seat is composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa and 38 kg/m3 – 2.8 kPa) clad in 110 g/m² polyester quilting. The back cushion is composed of high resilience polyurethane Bultex foam (42 kg/m3 – 4.8 kPa and 26 kg/m3 – 1.4 kPa) clad in ultra-flexible polyurethane foam (45 kg/m3 – 1.8 kPa). Anti-slip system on lower face. Clad in 110 g/m² polyester quilting. MAKING-UP Twin-needle stitching on seat ; baguette and twin-needle stitching on the back cushion. Covers may be removed by a professional.

Telen Module b1

Cinna > Curtain

CONSTRUCTION Structure of seat : 3-layer plywood. Structure of back cushion: panel of particleboard. COMFORT The seat is composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa and 38 kg/m3 – 2.8 kPa) clad in 110 g/m² polyester quilting. The back cushion is composed of high resilience polyurethane Bultex foam (42 kg/m3 – 4.8 kPa and 26 kg/m3 – 1.4 kPa) clad in ultra-flexible polyurethane foam (45 kg/m3 – 1.8 kPa). Anti-slip system on lower face. Clad in 110 g/m² polyester quilting. MAKING-UP Twin-needle stitching on seat ; baguette and twin-needle stitching on the back cushion. Covers may be removed by a professional.

Ipanema Curved settee

Cinna > Sofa

CONSTRUCTION Structure of armrest and backrest in mechanically-soldered tubular steel clad in Bultex foam and 110g/m² polyester quilting. Structure of seat: majority multi-ply, which makes each piece significantly lighter, clad in polyether foam and 110g/m² polyester quilting. Matt black round legs H 30 mm Ø 50mm, concealed beneath the structure. COMFORT Suspension of seat via elastic webbing. Seat cushion in high resilience Bultex foam (36kg/m3 - 2.8 kPa, 42kg/m3 – 4.8 kPa) and 110g/m² polyester quilting. Structure of seat clad in 110g/m² polyester quilting. Comfort of backrest provided by a combination of feather-filled cushions: large cushions filled with new duck feathers (10% down / 90% feathers); small cushions filled with new duck feathers (15% feathers).

Cover Medium settee

Cinna > Sofa

CONSTRUCTION Structure of settees in high resilience Bultex foam ; footstool has a wooden carcase made from 3-layer particleboard. Black polypropylene gliders. COMFORT High resilience Bultex foam (36 kg/m3 - 2.7 kPa, 38 kg/m3 - 3.6 kPa). Polyether foam (28 kg/m3 - 4.8 kPa, 34 kg/m3 - 6.4 kPa). Core of settee armrests in moulded foam. Settees are systematically supplied with a 40 x 40 cm feather-filled cushion, upholstered in the same covering material as the main cover. This cushion is also priced separately to enable additional cushions to be ordered ; additional cushions may be made up in any fabric or leather from the collection. MAKING-UP The medium and large Cover settees are composed of a base and a 'cover', which is draped over the base and is held in position by toggles at the rear of the seat. These items may be bi-colour and/or bi-material. Base is covered in fabric (to order) + base cloth. The stitching of the cover follows the outline of the back and armrests, creating a geometric effect which appears completely random. The stitching serves to 'quilt' the covering fabric used, whilst the upper and lower fabrics act to sandwich 300 g/m2 polyester quilting. Progressive V-shaped motifs (denser towards the middle of the seat and less so at the edges). The cover may be removed easily and may be dry cleaned. Footstool : baguette stitching around the edges. Cover is quilted with 110 g/m2 polyester.

Okura Medium settee low back

Cinna > Sofa

CONSTRUCTION Seat in panels of 3-layer particleboard, cut and clad in polyether foam and 110 g/m2 polyester quilting. COMFORT Webbed suspension on seat. Back consists of a mechanically-soldered steel structure clad in injected polyurethane foam and 110 g/m2 polyester quilting. Seat cushion in high resilience polyurethane Bultex foam (36kg/m3 - 2.8kPa) and 110 g/m2 polyester quilting. Compartmented back cushion filled with new goose feathers (10% down / 90% feathers). High back cushion with structure in mechanically-soldered steel clad in high resilience polyurethane Bultex 26kg/m3 - 1.4kPa and 110g/m2 polyester quilting.

SOFT ISLAND - Sectional fabric sofa

Bonaldo > Sofa

The Soft Island sofa by Bonaldo epitomizes a refined and contemporary approach to comfort, blending simplicity with elegance in every detail. Constructed from high-quality materials, the sofa's slender and minimalist design is both visually appealing and functional. The body of the sofa features clean lines that accommodate a single long seat cushion, which is crafted with meticulous attention to detail, offering a customizable seating experience. The Soft Island collection offers versatile configurations including linear sofas, poufs, compositions featuring corner pieces, and chaise longues. This versatility makes it suitable for various interior design settings, from living rooms to bedrooms, ensuring that the sofa can be seamlessly integrated into any space while maintaining its refined aesthetic. One of the key features of the Soft Island collection is its removable upholstery, available in both fabric and leather options, allowing for easy maintenance and customization. The subtle metal feet further enhance the overall elegance and sophistication of the design, subtly defining the base of the sofa. The cushions are designed to provide a comfortable seating experience with their generous amounts and varied backrests, creating a dichotomy that accentuates the sofa's formal simplicity and composed comfort. For those seeking an additional touch of luxury, Bonaldo offers a metal frame option for the Soft Island collection, which not only defines the base but also adds a refined elegance to the design. Care tips are essential for maintaining the longevity and aesthetic appeal of this sophisticated piece. Regular cleaning with a soft cloth is recommended, avoiding harsh chemicals or abrasive materials that could damage the upholstery. Periodic repositioning of cushions can help distribute wear evenly across all areas, prolonging their lifespan. For leather options, it's important to use Bonaldo-approved leather care products and avoid prolonged exposure to direct sunlight. The Soft Island sofa by Bonaldo is not only a testament to contemporary design but also an investment in comfort and style that will endure for years to come. Its thoughtful construction and versatile configurations make it ideal for both residential and commercial settings, offering a perfect blend of functionality and sophistication.

French cafe chairs

Jade + Amber > Chair

French Café Chairs Made in France, exclusive and unique custom made French café bistro chair made in France for commercial and residential café chairs, French Authentic café chairs, French Furniture Showroom Melbourne, Sydney, Brisbane, Lindon, New York, Toorak

Uncover Chaise longue

Cinna > Chair

CONSTRUCTION An assembly of varying densities of high resilience polyurethane Bultex foam and polyether foam (base). Frame of footstool in 3-layer particleboard, with black polypropylene gliders. COMFORT Structure in high resilience Bultex foam (36kg/m3 - 2.7 kPa, 38 kg/m3 - 3.6 kPa). Base in polyether foam (28 kg/m3 - 4.8kPa, 34 kg/m3 - 6.4 kPa). Core of settee armrests in moulded foam, density 42 kg/m3 – 48 kPa. The entire structure is clad in 110 g/m² polyester quilting. Settees are equipped with a feather-filled cushion (40 cm x 40 cm) as standard, covered in the same covering material/colour as the main cover, but without the stitched motif. This cushion is also priced separately should more be required. MAKING-UP Only stretch fabrics may be used. Fully removable covers. IMPORTANT : When the model UNCOVER (except armchair) is upholstered in ARDA, CAPA, MILLA or MOSAÏC 2 there is a transversal seam on the rear of the back.

Grand angle Large settee with broad armrest without lumbar cushion

Cinna > Accessories

CONSTRUCTION Structure of seat: webbed metal frame. Structure of backrest : panels 3-layer plywood with articulated headrest. Armrest composed of panels of plywood. COMFORT Seat composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa) and ultra-flexible foam (45 kg/m3 – 1.8 kPa) with comfort layer of feathers (goose feathers, of which 15% down). Backrest composed of high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa) clad in ultra-flexible foam (45 kg/m3 – 1.8 kPa). Feather-filled back (lumbar) cushion (goose feathers, of which 15% down). MAKING-UP Backrest quilted with stretch fabric to retain pleating on rear of backrest. Cover quilted with 110 g/m² polyester.

Loft Chair

Muuto > Chair

Loft Chair exemplifies honest, simple design thanks to an expression inspired by industrial design. The design features contrasting materials with its frame in powder coated steel that is offset by the soft plywood on seat and back, molded to embrace the user's body.

Outline Chair

Muuto > Chair

The Outline Series adds new perspectives to the classic Scandinavian design sofas of the 1960's, marrying the ideals of simplicity and function into one. With the design taking its name from its strong outline of a sofa, the Outline Series is clean and elegant on the outside with a deep seat and soft cushioning on its inside. The Outline Series has an expression that is at once elegant yet timeless, elevated by its lines referencing architectural shapes alongside its curved armrests, giving the design a distinct appearance across various sizes and variants. The Outline Series also includes Studio versions of the Sofa and Chair, being compact versions with slimmed-down proportions for smaller spaces within the home, hotel rooms, work settings and more. The Outline Studio Sofa and Chair have a smaller depth of 76 cm / 29.9”.

Workshop Chair

Muuto > Chair

The Workshop Chair brings a playful approach to the wooden chair. The design creates a new perspective on archetypical Scandinavian design through its thin back shell and slightly curved seat that gives the chair its distinct look.

Fiber Side Chair Sled Base

Muuto > Chair

The Fiber Chair brings a new perspective to the iconic shell chair through its innovative composite of 100% recycled plastic and wood fibers. The wood fibers blend into the surface for a matte finish, adding a soft, inviting touch. The Fiber Chair is designed with friendly, embracing curves that provide extensive comfort to its user while taking up little space in the room. 

Outline Studio Chair

Muuto > Chair

The Outline Studio Series adds new perspectives to the classic Scandinavian design sofas of the 1960's, designed in slimmed-down proportions for smaller spaces such as apartments, hotel rooms, workplaces and more. With the design taking its name from its strong outline of a sofa, the Outline Series is clean and elegant on the outside with a deep seat and soft cushioning on its inside. The Outline Series has an expression that is at once elegant yet timeless, elevated by its lines referencing architectural shapes alongside its curved armrests, giving the design a distinct appearance across various sizes and variants.

Gyon

Leolux > Chair

Designer Christian Werner has stripped the dining chair back to the basics. The result is Gyon, a design built entirely on basic shapes. Werner has created a stunningly elegant chair that doesn't compromise on comfort.

Tamarinde

Leolux > Chair

Tamarinde is a slender dining chair with invitingly open arms and an adjustable back, so you can easily relax after dessert. With Tamarinde, a good conversation can go on for hours after an amazing meal.

Be bop

Kartell > Chair

A chair that combines several expressions in a single vocabulary, tracing the lines of the most traditional carved African stools and merging them with the American design of the golden years, echoing the concept of curved multilayer plywood.

Ero|s|

Kartell > Chair

Ero|S| is a swivel armchair with an organic egg shape, a refined combination of finishes and an adept use of colour. Ero|S| is ideal for the home, in dining or living rooms, but it also fits nicely into offices as a representative chair in the meeting room or in waiting areas. Two versions are available: the chair can rest on a glossy aluminium rotating base with central support or on a lightweight four-legged chrome structure.

Comback (2 chairs)

Kartell > Chair

Comback is a chair featuring a backrest consisting of seven "teeth" which spread out towards the lumbar region where they meet a reinforced hexagonal rim with slim shafts radiating down to join the seat. A goodly size, this single mould chair embodies functionality and well-freighted ergonomics with sentiment and memories. The Comback comes in several modernised versions – the “swivel” model with four spokes and a central swivel shaft and the “sled” with two slim tubular sides.

BM5565 Deck Chair with Footrest

Carl Hansen > Chair

Børge Mogensen’s Outdoor series, first introduced to Carl Hansen & Søn’s collection of outdoor furniture in 2020, is now expanded with the Deck Chair with Footrest. Comfortable, functional and space-saving, the foldable design provides optimal comfort as well as a light and elegant expression.

Off Chair High 5W Gas Lift Aluminum Ultra Leather

Normann Copenhagen > Chair

Off Chair consists of a seat made from rigid PU foam with full upholstery. Inside the upholstery and PU foam, the chair has a steel reinforcement structure. The base comes with either four static legs or five wheels with swivel and a tilt inclination of 10°, and is made of polished or black powder-coated aluminum. An optional cushion made of veneer and PU foam is available. Choose between leather upholstery or a wide range of different textile upholstery options.