STAIRTEC SA aluminium stairnosing trims with anti-slip strip - 2d files - 3d files

TRIMTEC TR: multipurpose profiles in different materials

profilitec > Accessories

TRIMTEC TR: multipurpose profiles in different materials TRIMTEC TR is a complete range of brass, aluminium and stainless steel trim profiles designed for fast and efficient installation of any flooring type, regardless of size and thickness. TRIMTEC TR is available in various heights from 2 to 30 mm, matching different tile thicknesses. In the aluminium and brass versions, a dovetail groove maximizes the grout grip and edge protection for both vertical and horizontal tile laying. TRIMTEC TR profiles are conceived for tile laying, but can also be used with other types of flooring such as stone, wood and industrial resin floors. TRIMTEC TR profiles are mainly used as transition trims between two types of flooring (for example between tiling and moquetteing) and as expansion joints when two lengths are laid side by side. They can also be used as trimming for ceramic skirtings and as edge protection for any floor thickness. In some cases the profiles may be used as entrance mat framing. TRIMTEC TR Curveline: the bendable version of the TR TRIMTEC TR series is also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code. TRIMTEC TR how to install 1) Choose the trim size according to the tile thickness. The trim should be 0.5+/-1mm lower than the tile, therefore not exceeding the height of the tile. 2) Apply tile adhesive. 3) Cut the profile to required length, leaving extra space for linear expansion. The perforated flange of the trim is then firmly embedded into the adhesive and aligned. 4) Trowel an additional layer of adhesive over the perforations in the profile and in the dovetail groove of the vertical section. 5) Leave a tiny gap of approximately 0.5+/-2mm between the trim and the tile for final grouting.

TRIMTEC SR Edging perimeter profiles for ceramic floors

profilitec > Accessories

TRIMTEC SR Edging perimeter profiles for ceramic floors TRIMTEC SR is especially recommended for finishing the perimeter of ceramic floors, particularly when they abut a vertical surface. It is also used as stair nosing and trimming in balconies and exit ways. TRIMTEC SR profiles have an extended vertical edge to cover and protect border surfaces and prevent future cracking. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. The aluminium section is designed with vertical dovetail anchoring. TRIMTEC SR CURVELINE: bendable profiles TRIMTEC SR series is also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code.

BORDERTEC SBR Edging profiles for balconies and patios

profilitec > Accessories

BORDERTEC SBR Edging profiles for balconies and patios The BORDERTEC BSR is recommended for contouring marble and stone balconies and sidewalks. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. BORDERTEC BSR in size BSR 20/* can be used with PROFILITEC floating floor support systems. BORDERTEC BSR contains all necessary elements for state-of-the-art installation.

ROUNDJOLLY profiles for thin floors

profilitec > Accessories

ROUNDJOLLY profiles for thin floors ROUNDJOLLY profiles join floor types of different thicknesses, finishing and protecting the tile edge. Available in aluminium and stainless steel, this profile is ideal for renovations with thin tiles.

SQUAREJOLLY SJ: square shape trims

profilitec > Accessories

SQUAREJOLLY SJ: square shape trims Squarejolly SJ is a multipurpose aluminium profile used in laying adhesive ceramic floor and wall coverings. Its uniquely symmetrical shape lends itself to endless detailing possibilities. In the technical specs, H corresponds to the tile thickness and B = H + 1mm corresponds to the visible width of the profile. In the aluminium version, a patented internal cavity with a dovetail groove maximizes vertical grout grip and edge protection. The sectional design of the SQUAREJOLLY SJ profile provides a completely leveled surface, making it resistant to vertical loads and perfectly suitable for flooring applications. How SJ models can be used SQUAREJOLLY SJ is a multipurpose profile with a wide range of applications: • Leveled flooring intersections • Decorative accent bands • Wall tile contouring • Entrance mat framing • skirting finishing and edging • Stair nosing

COVERTEC EP: Transition trims for floors with the same height

profilitec > Accessories

COVERTEC EP: Transition trims for floors with the same height The COVERTEC EP profile joins two adjacent flooring surfaces (for example: concrete/ceramic tile, wood/ceramic tile and other resin or vinyl floor combinations). The overlapping section allows differential movement of the flooring, hides edging imperfections and prevents chipping and cracking. Available in aluminium and brass with patented dovetail anchoring.

COVERTEC SP: T shape trims for floors with the same height

profilitec > Accessories

COVERTEC SP: T shape trims for floors with the same height COVERTEC SP is a profile designed to join two adjacent existing floors at the same height but it can cover imperfections in cutting or slight variations of height to be found on a tiled floor joining to a wooden one for example. Thanks to its shape, available in 3 different widths, this profile helps floor coverings to maintain the minimum distance thus acting also as a dilatation joint.

STRIPTEC ST: Transition trims for floors with different heights (max 5mm)

profilitec > Accessories

STRIPTEC ST: Transition trims for floors with different heights (max 5mm) STRIPTEC ST profiles are designed to join adjoining floors of equal or different type and thickness. The rounded shape of this profile covers edge imperfections and allows a slight rotation, compensating for elevation differences of up to 5mm. It can also be used as a termination profile, given a floor thickness of up to 5mm. Available in two versions: self-adhesive and screw-on. STRIPTEC how to install Installation of self adhesive version: 1) Make sure the base is solid, flat, level, clean and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of the pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

STRIPTEC ST38: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC ST38: Transition trims for floors with the same heights ST38 aluminium profiles (available in the adhesive or perforated version) for transition or threshold cover with knurled surface. Slightly rounded shape. The shaped edge allows perfect contact with the floor. Used to minimize installation defects and creating expansion joints.

STRIPTEC STP: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC STP: Transition trims for floors with the same heights STP Brass profiles (available in the adhesive or perforated version) for connection or threshold cover with smooth brass surface. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

STRIPTEC STB: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC STB: Transition trims for floors with the same heights STB profiles in brass or aluminium (available in the adhesive or perforated version) for connection or threshold cover with smooth brass and aluminium grooves. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

MULTICLIP CLG Transition trims for all kind of floors

profilitec > Accessories

MULTICLIP CLG Transition trims for all kind of floors The innovative, patented MULTICLIP® CLG 370 profiles has a tilting head to adjust minor height differences up to 3mm. MULTICLIP CLG allows flooring expansion and contraction making it the perfect transition profile in between different flooring materials. You can easily increase the height by stacking up to 3 plastic rails one on top of the other. A 16mm internal cavity acts as an expansion joint, allowing 5mm of differential movement. Typically, laminate wood flooring expands about 5mm per plank due to humidity.

MULTIFIIX CLG Transitions trims for floors with the same height

profilitec > Accessories

MULTIFIIX CLG Transitions trims for floors with the same height Patented transition profile for floors at the same level, slightly rounded in anodised aluminium finish and with high resistance wood effect coating. This article has been conceived for a purely domestic environment and for Do-it-yourself use, to be fixed primarily with the nylon "MULTIFIX" plugs. MULTIFIX how to install 1. Forare con punta da 6 mm 2. Inserire gli appositi tasselli 3. Allineare i tasselli 4. Martellare in modo uniforme

MULTICOVER CLG - Transition trims for floors with the same height

profilitec > Accessories

MULTICOVER CLG - Transition trims for floors with the same height CLG transition profiles in anodised aluminium finish and with high resistance wood effect coating. The elements that make up the MULTICOVER® system fit perfectly thanks to the plastic rail and do not move once clipped together. The profiles are also available in a perforated version, for fixing with screws and plugs or self-adhesive, equipped with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective paper from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry

WOODTEC LG edging trims for wooden floors

profilitec > Accessories

WOODTEC LG edging trims for wooden floors WOODTEC LG profiles are specifically designed to join two adjoining floating wood floors. The size and shape of the profile section allows for differential movement typical of wood flooring. Its smooth top surface fits under doorways making it perfectly suitable for thresholds.

CARPETEC MG transition trims for carpet floors

profilitec > Accessories

CARPETEC MG transition trims for carpet floors Designed for carpet flooring, CARPETEC MG profiles are composed of two elements: a base track onto which the carpet is laid, and an interlocking, grooved top piece that snaps shut and compresses the carpeting.

CARPETEC MP Transition / edging trims for carpet floors

profilitec > Accessories

CARPETEC MP Transition / edging trims for carpet floors The multipurpose, grooved moquetteEC MP profiles designed to compress moquette flooring at different elevations. They may be used to join two types of moquetteing or as edge profiles.

STC Profile to cover electric cables

profilitec > Accessories

STC Profile to cover electric cables Profile used to cover electric cables. Available in the adhesive version.

CUBETEC CU: Transition trims for floors with the same height

profilitec > Accessories

CUBETEC CU: Transition trims for floors with the same height CUBETEC CU is a decorative profile that allows you to create a transition between floors of the same height or as a wall transition. The profile is characterized by the constancy of the visible dimension (8 mm) which is independent of the height of the profile. Available in polished AISI 304 stainless steel and satin steel.

CUBETEC FI: Transition trims for floors with the same height

profilitec > Accessories

CUBETEC FI: Transition trims for floors with the same height CUBETEC FI is a linear and decorative finishing element which provides long-lasting and heavy-duty tile edge protection. The CUBETEC FI profile is a decorative joint between different flooring types, trimming for ceramic tile and suitable for welcome mat framing. Two profile widths are available in polished stainless steel AISI 304.

VARIOTEC DS Transition trims to be used after flooring installation

profilitec > Accessories

VARIOTEC DS Transition trims to be used after flooring installation VARIOTEC DS is a stainless steel or brass profile for floors with differences in height from 7 to 12 mm. Supplied with adhesive on the lower side for a quick and long-lasting installation. Fitting to combine ceramic or parquet floors with lower thickness materials, such as moquettes or vinyl floors. Adhesives: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

LINETEC PR Transition trims

profilitec > Accessories

LINETEC PR Transition trims Extruded brass transition profile. Perimeter profile for wooden floors or ceramic with thickness 10 mm. They allow to solve quickly and with an excellent aesthetic result the most frequent junction situations between floors of different nature, where an appropriate connection system has not been foreseen at the time of installation.

LINETEC PQ Transition trims for floors with the same height

profilitec > Accessories

LINETEC PQ Transition trims for floors with the same height Profiles in extruded brass or stainless steel for transition between floors already installed. It fits between floors of 10 mm thick. They allow to solve quickly and with an excellent aesthetic result the most frequent transition situations between floors of different nature, where an appropriate transition system has not been foreseen at the time of installation.

LINETEC PU Transition trims for floors with the same height

profilitec > Accessories

LINETEC PU Transition trims for floors with the same height Extruded U-shaped brass profile for transition between floors already installed of 10 mm thick. It solves quickly and with an excellent aesthetic result the most frequent transition situations between floors of different nature, where an appropriate connection system has not been foreseen at the time of installation.

MULTICPLIP CLP perimetral trims that allows the flooring expansion / contraction

profilitec > Accessories

MULTICPLIP CLP perimetral trims that allows the flooring expansion / contraction The patented MULTICLIP® CLP 270 aluminium perimeter profile allows floor edge finishing without skirtings. A 16mm internal cavity allows 3/16’’ (5mm) of differential movement. This profile is also suitable along sliding door tracks and as entrance mat framing.

WOODTEC LT edging trims for wooden floors

profilitec > Accessories

WOODTEC LT edging trims for wooden floors The WOODTEC LT profiles are specifically designed for finishing the perimeter of floating wood floors, particularly when they transition to another floor type at the same elevation or abut a vertical surface. While acting as an expansion joint, they also allow floor edge finishing without skirtings. This profile is also suitable along sliding door tracks and as entrance mat framing. Installed with flathead screws.

CARPETEC MD edging tims for carpet floors

profilitec > Accessories

CARPETEC MD edging tims for carpet floors Perimeter profiles in anodised aluminium for flexible floors such as moquettes and coconut mats. The profiles, by pressing them, close, locking the edge, covering the cutting defects and preserving the edge. Available in the perforated and with hooks version to allow a better grip of the moquette.

CARPETEC MS edging tims for carpet floors

profilitec > Accessories

CARPETEC MS edging tims for carpet floors Rounded perimeter profile in anodised aluminium or brass for flexible floors such as moquetteing and coconut mats. The profiles, by pressing them, close, locking the coating in a lasting way, covering the cutting defects and preserving the edge. The profile is serrated both in the rounded part on the inside and on the surface to allow a better grip of the moquette.

ENTRYTEC BU Profiles for entrance mattings

profilitec > Accessories

ENTRYTEC BU Profiles for entrance mattings Reversible profile to create perimeters suitable for containing coconut doormats, moquettes or technical aluminium doormats. The profile, thanks to the particular shape, allows to obtain the two most common doormat thicknesses of 18 and 23 mm. The laying of the frame, which can be easily assembled with the brackets supplied, must be prepared at a height before laying the adjacent floor. The profile can also be laid with the help of modular and sliding fixing brackets inside the slots.

ROUNDTEC RD Transition trims for floors with different heights

profilitec > Accessories

ROUNDTEC RD Transition trims for floors with different heights The ROUNDTEC profile is mainly used in transitioning floor types of different thicknesses, for example from ceramic tile to thin linoleum. Its rounded section provides a smooth level change of 3mm, making it suitable between two floor types or as an end profile. ROUNDTEC can even be used as stair nosing or edging for tile countertops. Available in brass with patented dovetail anchoring.

ZEROTEC ZRM Ramp trims for floors with different heights

profilitec > Accessories

ZEROTEC ZRM Ramp trims for floors with different heights ZEROTEC ZRM profile is the ideal solution for joining two floors at different levels, between a ceramic covering and one in moquette moquetteing for instance. This trim allows a 5 mm progressive sloping difference to the next floor to match thus making safer when treading over the connecting floors. The ramp inclination has been conceived for vehicle and wheel carts transit.

ZEROTEC ZR Transition trims for floors with different heights and of different materials

profilitec > Accessories

ZEROTEC ZR Transition trims for floors with different heights and of different materials ZEROTEC ZR allows the installer to perfectly match different floor levels when laying ceramic tile or wood flooring over an existing floor. Because of the slope, ZEROTEC profiles are ideal in passage areas for hand trolley and cars, while providing edge protection resistant to vertical loads. The brass version is recommended for industrial applications in garages and shopping centers. Available in aluminium and brass with patented vertical dovetail anchoring. ZEROTEC ZR Curveline: bendable version of the Zerotec Some ZEROTEC ZR profiles are also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code.

Zerotec ZRN60 Transition trims for floors with different heights and of different materials

profilitec > Accessories

Zerotec ZRN60 Transition trims for floors with different heights and of different materials Zerotec ZRN60 has been designed to optimize transitions between different flooring materials, situation that often occurs in public environments such as hotels and restaurants. Its delicate line and its defined inclination allow to optimize the transition between different heights: from 8, 10 or 12.5 mm thick tiles to another 6 mm thick floor, giving a modern and elegant touch to the environment. The ramp length is 8.5 mm fixed for all heights. This particular design protects and hides the portion of the underlying coating (6 mm thick) from impacts and mechanical hits, preventing its possible breakage.

Zerotec ZR60 Transition trims for floors with different heights and of different materials

profilitec > Accessories

Zerotec ZR60 Transition trims for floors with different heights and of different materials Zerotec ZR60 has been designed to optimize transitions between different flooring materials; it can be typically found in public spaces, like hotels and restaurants. Its delicate line and gradual inclination allows a smooth transition between different floor levels: from 8 mm, 10 mm and 12.5 mm tile to an adjacent floor covering with a thickness of 6 mm, excellent for modern and elegant interior detailing. The profile’s unique shape hides and protects the edge of the flooring below (6 mm thickness) from mechanical impact, hiding imperfections while preventing damage caused by passage and use.

Profili RAMPTEC ZRR Ramp trims for floors with different heights

profilitec > Accessories

Profili RAMPTEC ZRR Ramp trims for floors with different heights The 20° slope of the anodised aluminium RAMPTEC ZRR profile provides a safe and progressive transition between two different floor levels. The vertical edge has a dovetailed internal cavity that maximizes grout and adhesive grip on load bearing points.

LEVELTEC RPR Transition trims to be used after flooring installation

profilitec > Accessories

LEVELTEC RPR Transition trims to be used after flooring installation LEVELTEC RPR is a model with the function of perimeter or connection profile between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wooden floors or moquetteing. LEVELTEC RPR is able to compensate for differences of 8 ÷ 14 mm. The profile is normally supplied with an adhesive with high sealing characteristics or without an adhesive.

LEVELTEC RP Transition trims to be used after flooring installation

profilitec > Accessories

LEVELTEC RP Transition trims to be used after flooring installation LEVELTEC RP is a series of profiles with a terminal or connecting function between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wood or carpet floors. The LEVELTEC RP series consists of profiles with heights between 4.5 ÷ 12.5 mm, capable of compensating for height differences of 3 ÷ 14 mm. The profile is normally supplied with adhesive of high sealing properties. They are also available in a drilled version for fixing with screws and dowels. LEVELTEC RP: transition profile in different dimensions Smooth and grooved LEVELTEC profiles in varying widths and heights transition floors of different elevations. Their sectional thickness makes them especially suitable for high traffic areas and the end detailing allows frictionless contact between the profile and floor. LEVELTEC RP how to install Installation of self-adhesive version: 1) Make sure the base is solid, flat, level, clean, and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

VARIOTEC DC Adhesive flooring profiles

profilitec > Accessories

VARIOTEC DC Adhesive flooring profiles VARIOTEC DC profiles’ innovative design elegantly rotates and adapts to match different floor elevations. By simply rotating its shape, this profile can adapt to floor thicknesses ranging from 7 to 14mm. Use our adhesive for on-site installation.

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8")

profilitec > Accessories

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8") Especially conceived for residential and light commercial use, VARIOTEC DK profiles are available in a wide range of decorative finishes. This profile series is designed to join different floor types with an elevation difference ranging from 7 to 16mm. VARIOTEC DK profiles are self-adhesive - simply cut the profile to the desired length, remove the adhesive backing and press uniformly downwards on to the profile to install. Always make sure the base is solid, flat, level, clean and dry.

VARIOTEC DR Transition trims to be used after flooring installation

profilitec > Accessories

VARIOTEC DR Transition trims to be used after flooring installation VARIOTEC DR are stainless steel or brass profiles used as a transition between already installed floors of different nature and level. Self-adhesive: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

Hand shower

duravit > Shower

Spray mode: SoftRain, Rain, IntenseRain, Dimensions of water supply connection: 1/2", Spray mode selection: Rotating blasting disc, Silicone nubs

STAIRTEC SA aluminium stairnosing trims with anti-slip strip

profilitec > Accessories

STAIRTEC SA aluminium stairnosing trims with anti-slip strip STAIRTEC SA is an anodised aluminium profile with a non-slip mineral grain strip that ensures high safety standards. This profile is an excellent choice for pre-existing stairs in commercial and industrial renovations. The carved internal cavity soundly adheres to pre-laid stairs, perfect for retrofitting damaged stairs and concealing edge imperfections. STAIRTEC SA profiles can be installed with adhesive or flathead screws subsequently covered with the mineral grain strip. STAIRTEC SA and its anti slip features The SWH product is R13 certified (non-slip insert). Non-slip properties. DIN 51130 (06/2004): slip resistance with footwear.

STAIRTEC FSL stair nosing trims with anti-slip insert

profilitec > Accessories

STAIRTEC FSL stair nosing trims with anti-slip insert The STAIRTEC FSL series with a non-slip thermoplastic rubber insert proposes a practical, durable and technical solution particularly applicable in public buildings with high traffic areas. The optional, patented “riser cover” conceals the riser edge.

STAIRTEC SWR Stainless steel tactile button for stairs

profilitec > Accessories

STAIRTEC SWR Stainless steel tactile button for stairs Modern and sophisticated, STAIRTEC SWR stainless steel non-slip buttons are a safe and innovative alternative to linear profiles. The round, grooved buttons slightly protrude 1.6mm from the stair or floor surface. Elegantly designed, STAIRTEC SWR buttons can be used to customize wood and natural stone staircases. Installation and assembly can be made on or off-site. To install on wood flooring, simply drill a 6.5mm hole and hammer the button in place. The buttons should be spaced 70mm on center. To install natural wood or ceramic tile flooring, simply drill a 7mm hole and fasten the button with appropriate adhesive. The buttons should be spaced 70mm on center. STAIRTEC SWR anti slip button The SWR series is R11 certified. Non-slip properties. DIN 51130 (06/2004): slip resistance with footwear.

Square section trims for coverings: SQUAREJOLLY SJ

profilitec > Accessories

Square section trims for coverings: SQUAREJOLLY SJ SQUAREJOLLY SJ is a multipurpose aluminium profile used in laying thin-set wall installations. Its uniquely symmetrical shape lends itself to endless detailing possibilities. The inner section of the profile has been designed to interlock with SQUARECAPSULE SJC, a single, symmetrical element which acts as an end cap, internal and external corner, and three-way intersection. SQUAREJOLLY SJ and its different functions Wide range of applications • Fillet floors on the same level • Create decorative strips • Fillet the external edge of the vertical coverings • Compasses for doormats • Top finish of ceramic edges and skirting boards Stair nosing profiles

Tileable covers with "invisible" effect for Showertec Linear conduits

profilitec > Accessories

Tileable covers with "invisible" effect for Showertec Linear conduits Showertec STL - CT are a family of tileable covers with "invisible" effect for linear trunking available in sizes 600-700-800-900-1000-1200 mm. Made with an aluminium support on which a membrane is applied which allows easy gluing of the tile. The system rests on the steel channel with plastic feet that cushion the acoustic transmission. The islands on the channel, on which the feet rest, allow an easy flow of water and guarantee the stability of the tiled part even during pedestrian use.

Flush-fitting frame for linear channels of the Showertec Linear system

profilitec > Accessories

Flush-fitting frame for linear channels of the Showertec Linear system Showertec STL - FW are a family of wall frames in AISI 316 stainless steel.The flush wall frame is available in the sizes 600-700-800-900-1000-1200 mm.

JALI - Vase with base in opaline glass and brass wire _ Ligne Roset

Ligne Roset > Accessories

The **JALI Vase** is a stunning fusion of opaline glass and epoxy matt brass lacquered steel wire mesh, standing at 22 cm in height with a 24 cm diameter. This unique piece combines a handcrafted brass mesh sphere with a matching opaline glass sphere, creating a versatile vase that allows for creative floral arrangements by threading flowers through the grid. Individually, each component doubles as a table lamp—the opaline glass diffuses soft, uniform light, while the brass mesh casts intricate decorative shadows. A 3D file of the product is available for download, offering a detailed digital representation for design enthusiasts. Crafted by **Ligne Roset**, a renowned French manufacturer established in 1860, the JALI Vase reflects the brand’s commitment to innovative, high-quality craftsmanship and modern design. Ligne Roset’s global presence and collaborations with leading designers ensure their products, including furniture, lighting, and accessories, remain timeless and accessible across diverse markets.

VIK - Swivel fabric office chair with castors with 5-Spoke base _ Ligne Roset

Ligne Roset > Chair

The Vik is a sleek and functional swivel fabric office chair, featuring a 5-spoke base with castors for smooth mobility, designed by the renowned French manufacturer Ligne Roset, a leader in modern and contemporary furniture since 1860, celebrated for its innovative designs and exceptional craftsmanship. A 3D file of the Vik chair is available for download, allowing for detailed visualization and integration into design projects.

FOCUS 4 - Square glass shower cabin with sliding door _ DISENIA

DISENIA > Shower

The Focus 4 shower enclosure features a stunning Bronze glass design with a Cromo finish frame, combining elegance and functionality. Its innovative release mechanism allows the door to open inwards, simplifying cleaning and maintenance, while its sleek design enhances any bathroom space. Part of the Focus collection, this model is available for both alcove and corner installations, offering versatility and a touch of modern sophistication to elevate your daily wellness rituals. A downloadable 3D file of the product is available for detailed visualization and planning. Manufactured by DISENIA, a renowned Italian supplier specializing in high-end bathroom and kitchen products, the Focus 4 reflects the brand’s commitment to luxury, innovation, and timeless design, making it a preferred choice for architects and interior designers worldwide.

TABULA CRITA102 - Wall-mounted bathtub set with hand shower _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **Tabula CRITA102** is a sleek, single-control wall-mounted external set designed for bathtubs, featuring a metal plate, mechanical mixing, and a diverter with two outlets. It includes a 185 mm spout, a brass anti-scale mini showerhead, a fixed support, a water outlet, and a long-life hose. Available in a variety of finishes such as white matt, chrome, polished black chrome, brushed black chrome, brushed metallic, black matt PVD, polished rose gold PVD, and brushed rose gold, this collection embodies a minimalist yet sophisticated design. Created by the renowned **Angeletti Ruzza Design Studio** for **CRISTINA Rubinetterie**, the Tabula series reflects a perfect blend of contemporary aesthetics and functionality, with its angular body and thoughtfully proportioned lever. A 3D file of the product is available for download, making it easier for designers and architects to integrate it into their projects. **CRISTINA Rubinetterie**, established in 1949 in Gozzano, Italy, is a leading manufacturer of high-quality faucets and bathroom accessories, renowned for combining cutting-edge technology with timeless elegance, making it a preferred choice for luxury and contemporary design projects worldwide.

DELTA CRIDE321 - Countertop bidet mixer with swivel spout _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The Delta CRIDE321 is a sleek, single-control, single-hole deck-mounted bidet mixer featuring mechanical mixing and a 1" 1/4 pop-up waste, available in a sophisticated Chrome Black matt finish. Designed as part of the CRISTINA range, this bidet mixer is perfect for contemporary bathrooms, combining style and functionality with its single-piece cast body and spout. A 3D file of the product is available for download, allowing for seamless integration into design plans. CRISTINA Rubinetterie, an Italian leader in high-quality faucets and bathroom accessories since 1949, is renowned for blending cutting-edge technology with timeless elegance, making it a preferred choice for luxury and contemporary design projects worldwide.

EXCLUSIVE CRIEV143 - 2 hole bathtub mixer with diverter _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **Exclusive CRIEV143** is a wall-mounted, 2-hole deck-mounted bath edge mixer featuring thermostatic mixing and a diverter with 3 outlets, complete with a recessed part for seamless integration. Available in a variety of premium finishes, including chrome, brushed black chrome, brushed metallic, black matt, yellow gold oro, PVD brushed rose gold, and brushed old brass, this product combines antique-inspired shapes with modern functionality, offering a perfect blend of timeless elegance and contemporary design. The series is designed with ergonomic and visually appealing handles, making it both prestigious and practical for modern lifestyles. A 3D file of the product is available for download, allowing for precise planning and integration into your design projects. **CRISTINA Rubinetterie**, the Italian manufacturer behind this product, is a leader in high-quality faucets and bathroom accessories, renowned for its fusion of cutting-edge technology and timeless elegance since its establishment in 1949.

EXCLUSIVE CRIEV205 - 3 hole washbasin tap _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **Exclusive CRIEV205** is a dual-control, 3-hole deck-mounted washbasin mixer featuring mechanical mixing and a 1 1/4" pop-up waste, available in a variety of premium finishes including chrome, brushed black chrome, brushed metallic, black matt, yellow gold oro, PVD brushed rose gold, and brushed old brass. This collection blends antique-inspired shapes with modern craftsmanship, offering a timeless yet contemporary design that complements both traditional and future-forward lifestyles. The mixer is equipped with ergonomic handles for enhanced functionality and aesthetic appeal. Additionally, a downloadable 3D file of the product is available for design and planning purposes. Manufactured by **CRISTINA Rubinetterie**, a renowned Italian brand established in 1949, the company is celebrated for its fusion of cutting-edge technology and elegant design, producing high-quality faucets and bathroom accessories that combine durability with luxurious aesthetics.

IMPERO CRIIM312 - Countertop single handle bidet mixer _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The Impero CRIIM312 is a single-control, single-hole deck-mounted large washbasin mixer featuring mechanical mixing and a 1" 1/4 pop-up waste, with a swan neck spout height of 159 mm. Available in a variety of finishes, including Chrome, Yellow Gold Oro, and Brushed Old Brass, this mixer combines traditional design elements with modern functionality, offering a nostalgic yet contemporary aesthetic for any bathroom. A 3D file of the product is available for download, allowing for seamless integration into design plans. Cristina Rubinetterie, the esteemed Italian manufacturer behind this product, has been a leader in high-quality faucet design since 1949, blending cutting-edge technology with timeless elegance to create luxurious and durable solutions for bathrooms, kitchens, and beyond.

QUADRI S CRIQS100 - Wall-mounted single handle bathtub set with hand shower _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The Quadri S CRIQS100 is a sleek, single-control wall-mounted external bath mixer featuring mechanical mixing, an automatic diverter with two outlets, a 165 mm spout, an anti-scale mini showerhead, a fixed support, and a long-life hose. Available in a variety of finishes, including polished chrome, brushed black chrome, matte black, and PVD rose gold, this model combines minimalist design with exceptional functionality. The Quadri S series, inspired by the iconic QM - Quadri Mono range, showcases softer lines and rounded edges, maintaining the brand’s signature clean, compact shapes and square lever. Designed for contemporary bathrooms, it blends rigorous aesthetics with the durability and reliability synonymous with CRISTINA Rubinetterie. A 3D file of the product is available for download, offering designers and architects a detailed preview for seamless integration into projects. CRISTINA Rubinetterie, a leading Italian manufacturer since 1949, is renowned for its innovative, high-quality faucets and bathroom solutions, blending cutting-edge technology with timeless elegance.

QUADRI S CRIQS107 - Wall-mounted single handle bathtub mixer with diverter _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **Quadri S CRIQS107** is a single-control, wall-mounted external bath mixer featuring mechanical mixing, an automatic diverter with two outlets, and a 165 mm spout. Available in a variety of finishes, including polished chrome, brushed black chrome, matte black, and PVD rose gold, this model combines sleek geometric shapes with softer, rounded edges, making it a standout addition to contemporary bathrooms. Part of the **Quadri S** series, this design evolved from the **Quadri Mono** range, showcasing CRISTINA Rubinetterie’s commitment to minimalist, functional elegance. A 3D file of the product is available for download, allowing for seamless integration into design plans. **CRISTINA Rubinetterie**, an Italian leader in luxury faucets and bathroom solutions since 1949, is renowned for blending cutting-edge technology with timeless design, offering products that cater to residential, hospitality, and wellness projects worldwide.

CRIXX833 - Stainless steel side shower _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Shower

The **CRIXX833** is a wall-mounted external set for body-jets, featuring a sleek round stainless steel plate designed to complement recessed parts CRICS705, CRICS706, or CRICS707. Crafted with precision, it boasts a brushed stainless steel AISI finish, ensuring both durability and a modern aesthetic. Known for its accuracy and speed in temperature selection, this product exemplifies the perfect blend of functionality and style. A downloadable 3D file of the product is available for design and planning purposes. **CRISTINA Rubinetterie**, the supplier, is a renowned Italian brand established in 1949, celebrated for its high-quality faucets and bathroom accessories that combine cutting-edge technology with timeless elegance, making it a preferred choice for luxury and contemporary design projects worldwide.

CRIPD010 - Overhead shower with anti-lime system _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Shower

**CRIPD010 - SANDWICH PLUS Anti-Scale Rain Effect Showerhead, 300 x 400 mm** This sleek and modern showerhead, designed for a luxurious showering experience, features a unique rain effect that creates a soothing cascade of water. Crafted from brushed stainless steel (AISI) with a chrome finish, it combines durability with a contemporary aesthetic. The innovative "Sandwich" design, made of thin steel sheets layered to a total thickness of 4 mm, ensures optimal performance even at low water pressure, delivering both comfort and water efficiency. Its slim profile and elegant design make it a perfect fit for sophisticated and modern bathrooms. The product is designed to be paired with a shower arm and is available in various sizes and shapes to suit different preferences. A downloadable 3D file of the product is available for designers and architects to integrate seamlessly into their projects. **Supplier Overview:** CRISTINA Rubinetterie, an Italian leader in high-quality faucets and bathroom accessories since 1949, is renowned for blending cutting-edge technology with timeless elegance, offering luxurious and sustainable solutions for residential, hospitality, and wellness spaces.

CRIPD557 - Ceiling mounted square overhead shower with anti-lime system _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Shower

**CRIPD557 - Square Antiscale Shower Head, 30 x 30 cm** This sleek and modern square shower head, measuring 30 x 30 cm, is designed to prevent limescale buildup, ensuring long-lasting performance and easy maintenance. Crafted with precision, it combines functionality with a minimalist aesthetic, making it a perfect addition to contemporary bathrooms. A 3D file of the product is available for download, allowing for seamless integration into design projects. **Supplier Overview** CRISTINA Rubinetterie, an Italian leader in luxury faucets and bathroom accessories since 1949, is renowned for its innovative designs, premium materials, and commitment to sustainability, making it a trusted choice for high-end residential and commercial projects worldwide.

CRICR486 - Wall-mounted thermostatic shower panel with hand shower _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Shower panel

The **CRICR486** is an external thermostatic shower mixer featuring a turning column pipe, a checkable anti-lime overhead shower, an anti-lime hand shower with a slide rail, and a LONG LIFE flexible hose, designed for both functionality and durability. A 3D file of the product is available for download, allowing for seamless integration into design projects. Manufactured by **CRISTINA Rubinetterie**, a renowned Italian leader in high-quality faucets and bathroom accessories since 1949, the company combines cutting-edge technology with timeless elegance, offering premium solutions for residential, hospitality, and wellness spaces.

DAYTIME - Wall-mounted thermostatic shower panel with hand shower _ newform

newform > Shower panel

Art. 69050 - Shower pillar with an exposed coaxial thermostatic mixer, complete with a diverter, a brass head shower, and a brass single-jet hand shower set, designed to elevate your everyday bathing experience. Inspired by the timeless charm and style of "Old England," the DAYTIME collection seamlessly blends design with tradition, catering to even the most refined tastes. Its classic yet sophisticated aesthetic shines in both traditional and contemporary settings, making it a versatile addition to any bathroom. A 3D file of the product is available for download, allowing for detailed visualization and planning. Newform, the supplier, is a renowned Italian interior design brand established in 1983, celebrated for its innovative and stylish bathroom and kitchen fixtures that combine functionality with aesthetic appeal, catering to both residential and commercial spaces worldwide.

DAYTIME - Recessed shower tap with diverter _ newform

newform > Tap

Art. 69044 - 1/2’’ concealed shower group, featuring a 2-way-in and 3-way-out concealed diverter with a 1/2’’ connection, is part of the DAYTIME collection, inspired by the timeless charm and elegance of "Old England." This collection seamlessly blends traditional design with modern functionality, catering to refined tastes and complementing both classic and contemporary interiors. The 3D file of this product is available for download, allowing for precise planning and integration into your space. Newform, the supplier, is a renowned Italian interior design company founded in 1983, celebrated for its innovative and stylish bathroom and kitchen fixtures that combine aesthetic appeal with exceptional durability and performance.

DAYTIME - 4 hole bathtub set with diverter with hand shower _ newform

newform > Tap

Art. 69095C - 4-hole deck-mounted bathtub group, complete with a diverter and shower set (without spout), is part of the DAYTIME collection, inspired by the timeless charm and elegance of "Old England." This collection seamlessly blends traditional design with modern sophistication, making it a perfect fit for both classic and contemporary interiors. The DAYTIME series reflects refined taste and attention to detail, offering a touch of splendor to any bathroom setting. Additionally, a downloadable 3D file of this product is available for detailed visualization and planning. Newform, an Italian interior design supplier established in 1983, is renowned for its innovative and stylish bathroom and kitchen fixtures, combining functionality with aesthetic appeal to cater to both residential and commercial spaces.

Z316 MONO 3300T601A00 / 3300SO01A00 - Ceiling mounted stainless steel rain shower _ ZAZZERI

ZAZZERI > Shower

The shower arm with an antilimescale showerhead is a sleek and functional addition to any modern bathroom, designed to resist mineral buildup and ensure long-lasting performance. Crafted by ZAZZERI, a renowned Italian luxury interior design supplier established in 1929, this product reflects the brand’s commitment to high-quality materials, innovative design, and timeless aesthetics. ZAZZERI’s expertise in creating premium bathroom and kitchen fixtures has made them a trusted choice for both residential and commercial spaces worldwide. Additionally, a 3D file of the product is available for download, allowing for seamless integration into design plans and virtual previews.

POP - Wall-mounted waterfall shower _ ZAZZERI

ZAZZERI > Shower

The POP shower wall-mounted jets and waterfall jet embody a fusion of tradition and innovation, blending clean, archetypal shapes with modern functionality. Inspired by the simplicity of early design, POP combines straight lines and curves, harmonizing metal's sleekness with the soft, colorful touch of silicon for a playful yet elegant aesthetic. Its brass construction is available in chrome, brushed steel, or black and white lacquered finishes, with a silicon neck in vibrant hues like smoky black, apple green, blueberry purple, apricot orange, milky white, and phosphorescent blue moon. The neck is flexible, allowing users to twist and bend it, while its glow-in-the-dark feature adds a practical and fun element. Designed with sustainability in mind, POP features a flow reducer for water efficiency (max 4 lt/min), an aerator for enhanced water pressure, and a temperature control system to prevent energy waste. Suitable for washbasins, bidets, bathtubs, and showers, POP is both innovative and user-friendly. A 3D file of the product is available for download, offering designers and customers a detailed preview. ZAZZERI, the Italian luxury bathroom and kitchen fixture supplier behind POP, has been a leader in high-quality, minimalist design since 1929, combining timeless craftsmanship with modern innovation.

IDEALRAIN NERO SETA - BD140 - Wall-mounted overhead shower _ Ideal Standard

Ideal Standard > Shower

Here’s your rephrased and expanded product description with a concise supplier overview and mention of the 3D file: *"This wall-mounted overhead shower from the Idealrain collection features a sleek matt black finish, combining modern elegance with timeless functionality. The product includes a downloadable 3D file for easy integration into design plans. Manufactured by Ideal Standard—a renowned bathroom solutions provider with over a century of expertise—the shower reflects the brand’s commitment to high-quality, stylish, and sustainable fittings for both residential and commercial spaces."* Let me know if you'd like any further refinements!

D-Code Spare roll holder

duravit > Accessories

Design by sieger design

D-Code Soap dispenser

duravit > Accessories

Type of mounting: Wall-mounted Design by sieger design

D-Code Towel shelf

duravit > Accessories

Design by sieger design

D-Code Toilet paper holder

duravit > Accessories

Design by sieger design

Starck T Glass holder

duravit > Accessories

Accent colour: White Matt, Glass, Brass, Type of mounting: Wall-mounted, Position toothbrush holder: Right, Left Design by Philippe Starck

Karree Soap dispenser

duravit > Accessories

Chrome, Type of mounting: Wall-mounted Design by Duravit

Universal Towel rail

duravit > Accessories