Leveltec leveling system, the LEV / M cap - 2d files - 3d files

PRODUCT DESCRIPTION

Leveltec leveling system, the LEV / M cap Leveltec is a revolutionary tiling system with no current equivalents in the market. The first levelling system that requires no tools for both installation and disassembly. It is an automatic screw system that works with a simple click. The product is laid in dry conditions, without need of adhesives. The system consists of a reusable cap and a series of tie-base (linear, cross or “T”) for joints of 2 mm, 3 mm and 5 mm (according to UNI EN 11493) or joints of 1 mm. The cap is compatible with all the tie-bases that should be chosen according to the type of tile and the installation to do. Self-levelling function for tile laying The use of the Leveltec allows the perfect alignement of the upper surface of the floor with the surface of the wall, compensating not the non-planarity and the following glue shrinkage.

SUPPLIER: PROFILITEC

TYPE: ACCESSORIES

HTTPS://US.PROFILITEC.COM

[email protected]

LIST OF FILES:

Leveltec - Brochure - Pieghevole Leveltec 2022 - web.pdf

OTHER SUPPLIERS

A wide range of product from near to 3,000 suppliers around the world.

Other Products From This Supplier

A wide range of product from furniture to finishes to meet the desire of all designers.

TRIMTEC TR: multipurpose profiles in different materials

profilitec > Accessories

TRIMTEC TR: multipurpose profiles in different materials TRIMTEC TR is a complete range of brass, aluminium and stainless steel trim profiles designed for fast and efficient installation of any flooring type, regardless of size and thickness. TRIMTEC TR is available in various heights from 2 to 30 mm, matching different tile thicknesses. In the aluminium and brass versions, a dovetail groove maximizes the grout grip and edge protection for both vertical and horizontal tile laying. TRIMTEC TR profiles are conceived for tile laying, but can also be used with other types of flooring such as stone, wood and industrial resin floors. TRIMTEC TR profiles are mainly used as transition trims between two types of flooring (for example between tiling and moquetteing) and as expansion joints when two lengths are laid side by side. They can also be used as trimming for ceramic skirtings and as edge protection for any floor thickness. In some cases the profiles may be used as entrance mat framing. TRIMTEC TR Curveline: the bendable version of the TR TRIMTEC TR series is also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code. TRIMTEC TR how to install 1) Choose the trim size according to the tile thickness. The trim should be 0.5+/-1mm lower than the tile, therefore not exceeding the height of the tile. 2) Apply tile adhesive. 3) Cut the profile to required length, leaving extra space for linear expansion. The perforated flange of the trim is then firmly embedded into the adhesive and aligned. 4) Trowel an additional layer of adhesive over the perforations in the profile and in the dovetail groove of the vertical section. 5) Leave a tiny gap of approximately 0.5+/-2mm between the trim and the tile for final grouting.

TRIMTEC SR Edging perimeter profiles for ceramic floors

profilitec > Accessories

TRIMTEC SR Edging perimeter profiles for ceramic floors TRIMTEC SR is especially recommended for finishing the perimeter of ceramic floors, particularly when they abut a vertical surface. It is also used as stair nosing and trimming in balconies and exit ways. TRIMTEC SR profiles have an extended vertical edge to cover and protect border surfaces and prevent future cracking. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. The aluminium section is designed with vertical dovetail anchoring. TRIMTEC SR CURVELINE: bendable profiles TRIMTEC SR series is also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code.

BORDERTEC SBR Edging profiles for balconies and patios

profilitec > Accessories

BORDERTEC SBR Edging profiles for balconies and patios The BORDERTEC BSR is recommended for contouring marble and stone balconies and sidewalks. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. BORDERTEC BSR in size BSR 20/* can be used with PROFILITEC floating floor support systems. BORDERTEC BSR contains all necessary elements for state-of-the-art installation.

ROUNDJOLLY profiles for thin floors

profilitec > Accessories

ROUNDJOLLY profiles for thin floors ROUNDJOLLY profiles join floor types of different thicknesses, finishing and protecting the tile edge. Available in aluminium and stainless steel, this profile is ideal for renovations with thin tiles.

SQUAREJOLLY SJ: square shape trims

profilitec > Accessories

SQUAREJOLLY SJ: square shape trims Squarejolly SJ is a multipurpose aluminium profile used in laying adhesive ceramic floor and wall coverings. Its uniquely symmetrical shape lends itself to endless detailing possibilities. In the technical specs, H corresponds to the tile thickness and B = H + 1mm corresponds to the visible width of the profile. In the aluminium version, a patented internal cavity with a dovetail groove maximizes vertical grout grip and edge protection. The sectional design of the SQUAREJOLLY SJ profile provides a completely leveled surface, making it resistant to vertical loads and perfectly suitable for flooring applications. How SJ models can be used SQUAREJOLLY SJ is a multipurpose profile with a wide range of applications: • Leveled flooring intersections • Decorative accent bands • Wall tile contouring • Entrance mat framing • skirting finishing and edging • Stair nosing

COVERTEC EP: Transition trims for floors with the same height

profilitec > Accessories

COVERTEC EP: Transition trims for floors with the same height The COVERTEC EP profile joins two adjacent flooring surfaces (for example: concrete/ceramic tile, wood/ceramic tile and other resin or vinyl floor combinations). The overlapping section allows differential movement of the flooring, hides edging imperfections and prevents chipping and cracking. Available in aluminium and brass with patented dovetail anchoring.

COVERTEC SP: T shape trims for floors with the same height

profilitec > Accessories

COVERTEC SP: T shape trims for floors with the same height COVERTEC SP is a profile designed to join two adjacent existing floors at the same height but it can cover imperfections in cutting or slight variations of height to be found on a tiled floor joining to a wooden one for example. Thanks to its shape, available in 3 different widths, this profile helps floor coverings to maintain the minimum distance thus acting also as a dilatation joint.

STRIPTEC ST: Transition trims for floors with different heights (max 5mm)

profilitec > Accessories

STRIPTEC ST: Transition trims for floors with different heights (max 5mm) STRIPTEC ST profiles are designed to join adjoining floors of equal or different type and thickness. The rounded shape of this profile covers edge imperfections and allows a slight rotation, compensating for elevation differences of up to 5mm. It can also be used as a termination profile, given a floor thickness of up to 5mm. Available in two versions: self-adhesive and screw-on. STRIPTEC how to install Installation of self adhesive version: 1) Make sure the base is solid, flat, level, clean and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of the pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

STRIPTEC ST38: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC ST38: Transition trims for floors with the same heights ST38 aluminium profiles (available in the adhesive or perforated version) for transition or threshold cover with knurled surface. Slightly rounded shape. The shaped edge allows perfect contact with the floor. Used to minimize installation defects and creating expansion joints.

STRIPTEC STP: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC STP: Transition trims for floors with the same heights STP Brass profiles (available in the adhesive or perforated version) for connection or threshold cover with smooth brass surface. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

STRIPTEC STB: Transition trims for floors with the same heights

profilitec > Accessories

STRIPTEC STB: Transition trims for floors with the same heights STB profiles in brass or aluminium (available in the adhesive or perforated version) for connection or threshold cover with smooth brass and aluminium grooves. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

MULTICLIP CLG Transition trims for all kind of floors

profilitec > Accessories

MULTICLIP CLG Transition trims for all kind of floors The innovative, patented MULTICLIP® CLG 370 profiles has a tilting head to adjust minor height differences up to 3mm. MULTICLIP CLG allows flooring expansion and contraction making it the perfect transition profile in between different flooring materials. You can easily increase the height by stacking up to 3 plastic rails one on top of the other. A 16mm internal cavity acts as an expansion joint, allowing 5mm of differential movement. Typically, laminate wood flooring expands about 5mm per plank due to humidity.

MULTIFIIX CLG Transitions trims for floors with the same height

profilitec > Accessories

MULTIFIIX CLG Transitions trims for floors with the same height Patented transition profile for floors at the same level, slightly rounded in anodised aluminium finish and with high resistance wood effect coating. This article has been conceived for a purely domestic environment and for Do-it-yourself use, to be fixed primarily with the nylon "MULTIFIX" plugs. MULTIFIX how to install 1. Forare con punta da 6 mm 2. Inserire gli appositi tasselli 3. Allineare i tasselli 4. Martellare in modo uniforme

MULTICOVER CLG - Transition trims for floors with the same height

profilitec > Accessories

MULTICOVER CLG - Transition trims for floors with the same height CLG transition profiles in anodised aluminium finish and with high resistance wood effect coating. The elements that make up the MULTICOVER® system fit perfectly thanks to the plastic rail and do not move once clipped together. The profiles are also available in a perforated version, for fixing with screws and plugs or self-adhesive, equipped with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective paper from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry

WOODTEC LG edging trims for wooden floors

profilitec > Accessories

WOODTEC LG edging trims for wooden floors WOODTEC LG profiles are specifically designed to join two adjoining floating wood floors. The size and shape of the profile section allows for differential movement typical of wood flooring. Its smooth top surface fits under doorways making it perfectly suitable for thresholds.

CARPETEC MG transition trims for carpet floors

profilitec > Accessories

CARPETEC MG transition trims for carpet floors Designed for carpet flooring, CARPETEC MG profiles are composed of two elements: a base track onto which the carpet is laid, and an interlocking, grooved top piece that snaps shut and compresses the carpeting.

CARPETEC MP Transition / edging trims for carpet floors

profilitec > Accessories

CARPETEC MP Transition / edging trims for carpet floors The multipurpose, grooved moquetteEC MP profiles designed to compress moquette flooring at different elevations. They may be used to join two types of moquetteing or as edge profiles.

STC Profile to cover electric cables

profilitec > Accessories

STC Profile to cover electric cables Profile used to cover electric cables. Available in the adhesive version.

CUBETEC CU: Transition trims for floors with the same height

profilitec > Accessories

CUBETEC CU: Transition trims for floors with the same height CUBETEC CU is a decorative profile that allows you to create a transition between floors of the same height or as a wall transition. The profile is characterized by the constancy of the visible dimension (8 mm) which is independent of the height of the profile. Available in polished AISI 304 stainless steel and satin steel.

CUBETEC FI: Transition trims for floors with the same height

profilitec > Accessories

CUBETEC FI: Transition trims for floors with the same height CUBETEC FI is a linear and decorative finishing element which provides long-lasting and heavy-duty tile edge protection. The CUBETEC FI profile is a decorative joint between different flooring types, trimming for ceramic tile and suitable for welcome mat framing. Two profile widths are available in polished stainless steel AISI 304.

VARIOTEC DS Transition trims to be used after flooring installation

profilitec > Accessories

VARIOTEC DS Transition trims to be used after flooring installation VARIOTEC DS is a stainless steel or brass profile for floors with differences in height from 7 to 12 mm. Supplied with adhesive on the lower side for a quick and long-lasting installation. Fitting to combine ceramic or parquet floors with lower thickness materials, such as moquettes or vinyl floors. Adhesives: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

LINETEC PR Transition trims

profilitec > Accessories

LINETEC PR Transition trims Extruded brass transition profile. Perimeter profile for wooden floors or ceramic with thickness 10 mm. They allow to solve quickly and with an excellent aesthetic result the most frequent junction situations between floors of different nature, where an appropriate connection system has not been foreseen at the time of installation.

LINETEC PQ Transition trims for floors with the same height

profilitec > Accessories

LINETEC PQ Transition trims for floors with the same height Profiles in extruded brass or stainless steel for transition between floors already installed. It fits between floors of 10 mm thick. They allow to solve quickly and with an excellent aesthetic result the most frequent transition situations between floors of different nature, where an appropriate transition system has not been foreseen at the time of installation.

LINETEC PU Transition trims for floors with the same height

profilitec > Accessories

LINETEC PU Transition trims for floors with the same height Extruded U-shaped brass profile for transition between floors already installed of 10 mm thick. It solves quickly and with an excellent aesthetic result the most frequent transition situations between floors of different nature, where an appropriate connection system has not been foreseen at the time of installation.

MULTICPLIP CLP perimetral trims that allows the flooring expansion / contraction

profilitec > Accessories

MULTICPLIP CLP perimetral trims that allows the flooring expansion / contraction The patented MULTICLIP® CLP 270 aluminium perimeter profile allows floor edge finishing without skirtings. A 16mm internal cavity allows 3/16’’ (5mm) of differential movement. This profile is also suitable along sliding door tracks and as entrance mat framing.

WOODTEC LT edging trims for wooden floors

profilitec > Accessories

WOODTEC LT edging trims for wooden floors The WOODTEC LT profiles are specifically designed for finishing the perimeter of floating wood floors, particularly when they transition to another floor type at the same elevation or abut a vertical surface. While acting as an expansion joint, they also allow floor edge finishing without skirtings. This profile is also suitable along sliding door tracks and as entrance mat framing. Installed with flathead screws.

CARPETEC MD edging tims for carpet floors

profilitec > Accessories

CARPETEC MD edging tims for carpet floors Perimeter profiles in anodised aluminium for flexible floors such as moquettes and coconut mats. The profiles, by pressing them, close, locking the edge, covering the cutting defects and preserving the edge. Available in the perforated and with hooks version to allow a better grip of the moquette.

CARPETEC MS edging tims for carpet floors

profilitec > Accessories

CARPETEC MS edging tims for carpet floors Rounded perimeter profile in anodised aluminium or brass for flexible floors such as moquetteing and coconut mats. The profiles, by pressing them, close, locking the coating in a lasting way, covering the cutting defects and preserving the edge. The profile is serrated both in the rounded part on the inside and on the surface to allow a better grip of the moquette.

ENTRYTEC BU Profiles for entrance mattings

profilitec > Accessories

ENTRYTEC BU Profiles for entrance mattings Reversible profile to create perimeters suitable for containing coconut doormats, moquettes or technical aluminium doormats. The profile, thanks to the particular shape, allows to obtain the two most common doormat thicknesses of 18 and 23 mm. The laying of the frame, which can be easily assembled with the brackets supplied, must be prepared at a height before laying the adjacent floor. The profile can also be laid with the help of modular and sliding fixing brackets inside the slots.

ROUNDTEC RD Transition trims for floors with different heights

profilitec > Accessories

ROUNDTEC RD Transition trims for floors with different heights The ROUNDTEC profile is mainly used in transitioning floor types of different thicknesses, for example from ceramic tile to thin linoleum. Its rounded section provides a smooth level change of 3mm, making it suitable between two floor types or as an end profile. ROUNDTEC can even be used as stair nosing or edging for tile countertops. Available in brass with patented dovetail anchoring.

ZEROTEC ZRM Ramp trims for floors with different heights

profilitec > Accessories

ZEROTEC ZRM Ramp trims for floors with different heights ZEROTEC ZRM profile is the ideal solution for joining two floors at different levels, between a ceramic covering and one in moquette moquetteing for instance. This trim allows a 5 mm progressive sloping difference to the next floor to match thus making safer when treading over the connecting floors. The ramp inclination has been conceived for vehicle and wheel carts transit.

ZEROTEC ZR Transition trims for floors with different heights and of different materials

profilitec > Accessories

ZEROTEC ZR Transition trims for floors with different heights and of different materials ZEROTEC ZR allows the installer to perfectly match different floor levels when laying ceramic tile or wood flooring over an existing floor. Because of the slope, ZEROTEC profiles are ideal in passage areas for hand trolley and cars, while providing edge protection resistant to vertical loads. The brass version is recommended for industrial applications in garages and shopping centers. Available in aluminium and brass with patented vertical dovetail anchoring. ZEROTEC ZR Curveline: bendable version of the Zerotec Some ZEROTEC ZR profiles are also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code.

Zerotec ZRN60 Transition trims for floors with different heights and of different materials

profilitec > Accessories

Zerotec ZRN60 Transition trims for floors with different heights and of different materials Zerotec ZRN60 has been designed to optimize transitions between different flooring materials, situation that often occurs in public environments such as hotels and restaurants. Its delicate line and its defined inclination allow to optimize the transition between different heights: from 8, 10 or 12.5 mm thick tiles to another 6 mm thick floor, giving a modern and elegant touch to the environment. The ramp length is 8.5 mm fixed for all heights. This particular design protects and hides the portion of the underlying coating (6 mm thick) from impacts and mechanical hits, preventing its possible breakage.

Zerotec ZR60 Transition trims for floors with different heights and of different materials

profilitec > Accessories

Zerotec ZR60 Transition trims for floors with different heights and of different materials Zerotec ZR60 has been designed to optimize transitions between different flooring materials; it can be typically found in public spaces, like hotels and restaurants. Its delicate line and gradual inclination allows a smooth transition between different floor levels: from 8 mm, 10 mm and 12.5 mm tile to an adjacent floor covering with a thickness of 6 mm, excellent for modern and elegant interior detailing. The profile’s unique shape hides and protects the edge of the flooring below (6 mm thickness) from mechanical impact, hiding imperfections while preventing damage caused by passage and use.

Profili RAMPTEC ZRR Ramp trims for floors with different heights

profilitec > Accessories

Profili RAMPTEC ZRR Ramp trims for floors with different heights The 20° slope of the anodised aluminium RAMPTEC ZRR profile provides a safe and progressive transition between two different floor levels. The vertical edge has a dovetailed internal cavity that maximizes grout and adhesive grip on load bearing points.

LEVELTEC RPR Transition trims to be used after flooring installation

profilitec > Accessories

LEVELTEC RPR Transition trims to be used after flooring installation LEVELTEC RPR is a model with the function of perimeter or connection profile between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wooden floors or moquetteing. LEVELTEC RPR is able to compensate for differences of 8 ÷ 14 mm. The profile is normally supplied with an adhesive with high sealing characteristics or without an adhesive.

LEVELTEC RP Transition trims to be used after flooring installation

profilitec > Accessories

LEVELTEC RP Transition trims to be used after flooring installation LEVELTEC RP is a series of profiles with a terminal or connecting function between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wood or carpet floors. The LEVELTEC RP series consists of profiles with heights between 4.5 ÷ 12.5 mm, capable of compensating for height differences of 3 ÷ 14 mm. The profile is normally supplied with adhesive of high sealing properties. They are also available in a drilled version for fixing with screws and dowels. LEVELTEC RP: transition profile in different dimensions Smooth and grooved LEVELTEC profiles in varying widths and heights transition floors of different elevations. Their sectional thickness makes them especially suitable for high traffic areas and the end detailing allows frictionless contact between the profile and floor. LEVELTEC RP how to install Installation of self-adhesive version: 1) Make sure the base is solid, flat, level, clean, and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

VARIOTEC DC Adhesive flooring profiles

profilitec > Accessories

VARIOTEC DC Adhesive flooring profiles VARIOTEC DC profiles’ innovative design elegantly rotates and adapts to match different floor elevations. By simply rotating its shape, this profile can adapt to floor thicknesses ranging from 7 to 14mm. Use our adhesive for on-site installation.

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8")

profilitec > Accessories

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8") Especially conceived for residential and light commercial use, VARIOTEC DK profiles are available in a wide range of decorative finishes. This profile series is designed to join different floor types with an elevation difference ranging from 7 to 16mm. VARIOTEC DK profiles are self-adhesive - simply cut the profile to the desired length, remove the adhesive backing and press uniformly downwards on to the profile to install. Always make sure the base is solid, flat, level, clean and dry.

VARIOTEC DR Transition trims to be used after flooring installation

profilitec > Accessories

VARIOTEC DR Transition trims to be used after flooring installation VARIOTEC DR are stainless steel or brass profiles used as a transition between already installed floors of different nature and level. Self-adhesive: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

Recently Viewed Products

A wide range of product from furniture to finishes to meet the desire of all designers.

Metal Line 89/613 - Aluminium skirting board

profilpas > Accessories

VARIOTEC DS Transition trims to be used after flooring installation

profilitec > Accessories

STAIRTEC SI Stair nosing trims with anti-slip instert to be installed after flooring installation

profilitec > Accessories

STAIRTEC SI Stair nosing trims with anti-slip instert to be installed after flooring installation Engineered to withstand mechanical impact and chemical corrosion, the STAIRTEC SI profile is an optimal stair nosing solution. Equipped with a non-slip mineral grain strip, it ensures high safety standards. This profile is particularly suited for retrofitting stairs in commercial and industrial renovations. STAIRTEC SI profiles can be installed with adhesive or flathead screws. The non-slip mineral grain strip must be ordered separately and should be applied when the profile installation is complete. STAIRTEC SI stair nosing profiles to be used after flooring installation The SWH product is R13 certified (non-slip insert). Non-slip properties. DIN 51130 (06/2004): slip resistance with footwear.

ROUNDTEC RD Stainless Steel trims for stair nosing

profilitec > Accessories

ROUNDTEC RD Stainless Steel trims for stair nosing Stainless steel and brass profiles Ideal for finishing the edge of ceramic steps, protecting it from scratches and avoiding the corner at a sharp angle. Ideal for domestic and commercial applications.

SANITEC SB 30 Cove trim

profilitec > Accessories

SANITEC SB 30 Cove trim Hygienic cove shaped profiles between wall and wall and between wall and floor. Connections between the wall and the bathtub, the shower tray or the kitchen surface. The silicones that are normally used lose their anti-mold properties after a few months producing unsightly halos or stains. SB30 is a plastic profile with a rear support to facilitate the application and grip of the silicone with which it is installed on the walls. Improve or restore the appearance of the corners, making them more hygienic.

SANITEC SB 18 Cove trim

profilitec > Accessories

SANITEC SB 18 Cove trim SANITEC SB acrylic profiles seamlessly integrate around the edges of modern acrylic bathtubs and shower stalls. Internal corners and endcaps are available to install enclosed bathtubs

COFLEX CR corner joint between floors and walls

profilitec > Accessories

COFLEX CR corner joint between floors and walls The COFLEX CR patented series is designed as a cove-shaped wall-to-floor transition profile that allows elasticity and movement. A soft, internal section provides acoustic insulation, deadening the impact noise of footsteps. The profile is composed of a co-extruded synthetic resin profile and KERAJOLLY KJ profiles that interlock to perfectly match the tile thickness.

INTERJOLLY IJ connecting trims between the walls and the bath or shower trays

profilitec > Accessories

INTERJOLLY IJ connecting trims between the walls and the bath or shower trays INTERJOLLY IJ profiles optimize wall-to-floor tile transitions while allowing differential movement. The perforated flange installed behind the wall tiling guarantees secure grip. This cove-shaped profile is hygienic, easy to clean and can replace silicone caulking around shower stalls and bathtubs.

Structural joints in aluminium with rubber insert: JOINTEC GEL

profilitec > Accessories

Structural joints in aluminium with rubber insert: JOINTEC GEL Structural joints with an aluminium load-bearing structure and a synthetic rubber insert for 48 mm gates with horizontal (+ 8 / -7) and horizontal (+ 3 / -3) dilations. Designed to withstand structural movements of large buildings or compounds. They must be installed in correspondence of the spaces existing between two semi-attached parts making up the same building or between two different spans. They are able to connect these spaces, allowing vertical and horizontal movements according to the building settlements, be they cyclic or permanent. Within the modules created by the structural joints, however, a further fractionation of the surface with a grid of fraction joints must always be provided, depending on the type of passage provided on the surface.

BT aluminium SKIRTING for low thickness fittings

profilitec > Accessories

BT aluminium SKIRTING for low thickness fittings BASEBOARD-BT aluminium profiles detail glass mosaic and thin-set tile wall-to-floor transitions. The unique section of the profile trims the thin wall covering, hides tile edge imperfections, and conceals the perimeter movement joint.

Linear drain frames of the Showertec Linear system

profilitec > Accessories

Linear drain frames of the Showertec Linear system Showertec STL - F are a family of metal frames, made of stainless steel or aluminium with high resistance (Alu +). The frames are available in sizes 600-700-800-900-1000-1200 mm.

Leveltec leveling system, the LEV / M cap

profilitec > Accessories

POSTMODERNE - Wood and glass display cabinet _ Ligne Roset

Ligne Roset > Cabinet

This elegant piece features a rounded carcase and back panel finished in natural varnished walnut veneer, complemented by glazed doors with pewter anodized aluminum frames and clear toughened glass shelves. The top is available in a choice of gloss black marble-effect ceramic stoneware, argile lacquered glass, or plomb lacquered glass, with the interior finished in matching argile or plomb lacquer. Offering four distinct finish associations, this piece is also available with optional LED illumination, including a remote dimmer for added convenience. Designed by Eric Jourdan, this furniture reflects a unique design language, characterized by light, asymmetrical, and hollowed-out rounded forms that balance the tops with offset legs. A 3D file of the product is available for download, allowing for detailed visualization and planning. Crafted by Ligne Roset, a renowned French furniture manufacturer established in 1860, this piece exemplifies the brand’s commitment to modern, high-quality craftsmanship and innovative design, making it a perfect addition to both residential and commercial spaces.

DELTA CRIDE220 - Single handle washbasin mixer _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The Delta CRIDE220 is a single-control, single-hole deck-mounted washbasin mixer from the CRISTINA range, designed for contemporary bathrooms. It features mechanical mixing, a 1" 1/4 U&D* drain, and a sleek Chrome Black matt finish. Crafted with a body and spout cast into a single piece, it combines style and functionality seamlessly. A 3D file of the product is available for download, making it easier for designers and architects to integrate it into their projects. CRISTINA Rubinetterie, an Italian leader in high-quality faucets and bathroom accessories since 1949, is renowned for blending cutting-edge technology with timeless elegance, offering luxurious and durable solutions for residential, hospitality, and wellness spaces.

DELTA CRIDE237 - Wall-mounted single handle washbasin mixer _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The Delta CRIDE237 is a single-control, wall-mounted, 2-hole washbasin mixer from the CRISTINA range, designed for contemporary and essential bathrooms. It features a 185 mm spout, mechanical mixing, a 1" 1/4 U&D* drain, and comes with two rosettes and a recessed part, all finished in elegant Chrome Black matt. Crafted with the body and spout cast into a single piece, this mixer combines style and functionality seamlessly. A 3D file of the product is available for download, making it easier to visualize and integrate into your design plans. Supplied by CRISTINA Rubinetterie, a renowned Italian leader in high-quality faucets and bathroom accessories since 1949, the brand is celebrated for its fusion of cutting-edge technology, timeless elegance, and sustainable craftsmanship, making it a preferred choice for luxury and contemporary projects worldwide.

WC JET CRIWJ676 - Wall mounted toilet / bidet mixer with hand shower _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The WC Jet CRIWJ676 is a premium WC/bidet mixer valve featuring an integrated douche handset holder and a LONG LIFE flexible hose, designed for both functionality and durability. A 3D file of the product is available for download, offering convenience for designers and installers. Manufactured by CRISTINA Rubinetterie, a renowned Italian brand established in 1949, the company is celebrated for its fusion of cutting-edge technology and timeless elegance, producing high-quality faucets and bathroom accessories that cater to luxury residential, hospitality, and wellness projects worldwide.

EXCLUSIVE CRIEV114 - Bathtub tap / shower tap _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **Exclusive CRIEV114** is a dual-control, wall-mounted 3-hole shower and bathtub mixer featuring mechanical mixing and a diverter with two outlets, complete with a recessed part for seamless installation. This elegant fixture is available in a variety of premium finishes, including chrome, brushed black chrome, brushed metallic, black matt, yellow gold oro, PVD brushed rose gold, and brushed old brass, catering to diverse design preferences. Inspired by antique shapes reimagined for modern lifestyles, this series combines timeless aesthetics with contemporary functionality, offering ergonomic handles for a luxurious user experience. A 3D file of the product is available for download, allowing for precise planning and integration into your design projects. Manufactured by **CRISTINA Rubinetterie**, a renowned Italian leader in high-quality faucets and bathroom accessories since 1949, this product reflects the brand’s commitment to blending cutting-edge technology with timeless elegance, making it a trusted choice for luxury and contemporary spaces worldwide.

EXCLUSIVE CRIEV142 - 2 hole bathtub mixer with diverter _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **Exclusive CRIEV142** is a wall-mounted, 2-hole deck-mounted bath edge mixer featuring thermostatic mixing and a diverter with two outlets, complete with a recessed part. Available in a variety of premium finishes, including chrome, brushed black chrome, brushed metallic, black matt, yellow gold oro, PVD brushed rose gold, and brushed old brass, this series combines antique-inspired shapes with modern craftsmanship, offering a timeless yet contemporary aesthetic. Designed for both prestige and functionality, it features ergonomic handles for ease of use. A 3D file of the product is available for download, allowing for seamless integration into design projects. **Supplier Description:** CRISTINA Rubinetterie, an Italian leader in luxury faucets and bathroom solutions since 1949, is renowned for blending cutting-edge technology with timeless elegance, offering high-quality, sustainable designs for residential, hospitality, and wellness spaces.

EXCLUSIVE CRIEV226 - 1 hole metal washbasin mixer with individual rosettes _ CRISTINA Rubinetterie

CRISTINA Rubinetterie > Tap

The **Exclusive CRIEV226** is a dual-control, single-hole deck-mounted washbasin mixer featuring mechanical mixing and a 1 1/4" pop-up waste, available in a variety of premium finishes such as chrome, brushed black chrome, brushed metallic, black matt, yellow gold oro, PVD brushed rose gold, and brushed old brass. This collection blends antique-inspired shapes with modern craftsmanship, offering a timeless yet contemporary design that complements future-forward lifestyles. The mixer is equipped with ergonomic and visually appealing handles, combining prestige with functionality. A 3D file of the product is available for download, allowing for seamless integration into design projects. Manufactured by **CRISTINA Rubinetterie**, a renowned Italian brand established in 1949, the company is celebrated for its fusion of cutting-edge technology and timeless elegance, producing high-quality faucets and bathroom accessories that cater to luxury residential, hospitality, and wellness projects worldwide.

3-WAY OUT THERMOSTATIC SELECTORS 67603E - Thermostatic 4 hole shower mixer _ newform

newform > Tap

**ART. 67603E - Multifunction 3-Way Out Thermostatic (External Part)** This versatile thermostatic selector offers three-way functionality, designed for precise temperature control and efficient water distribution in modern bathroom or kitchen setups. The product is part of Newform's innovative range of fixtures, known for their sleek design and advanced features. A downloadable 3D file of the product is available for detailed visualization and planning. **Supplier Description:** Newform, an Italian interior design leader since 1983, specializes in crafting high-quality, stylish bathroom and kitchen fixtures, blending functionality with minimalist aesthetics for both residential and commercial spaces.

AQUALITE - Wall-mounted stainless steel remote control tap _ newform

newform > Tap

Art. 69263E - A sleek external wall mixer component designed for precise flow and temperature regulation, compatible with spouts or showerheads, crafted from durable AISI 316 stainless steel. This piece is part of the Aqualite collection by Newform, designed by Alberto Apostoli, which combines visual elegance with cutting-edge technology. The collection features minimalist, wall-integrated designs enhanced by light-reflecting blades, offering 31 customizable finish options to create a truly unique and versatile product. A 3D file of the product is available for download, allowing for detailed visualization and planning. Newform, an Italian interior design leader since 1983, is renowned for its innovative, high-quality bathroom and kitchen fixtures, blending functionality with modern aesthetics to cater to both residential and commercial spaces worldwide.

AQUALITE - Wall-mounted stainless steel waterfall spout _ newform

newform > Tap

Art. 69274E is an external waterfall spout designed to pair with the concealed body Art. 69273, offering a sleek and modern aesthetic for both residential and commercial spaces. This spout can be operated using the control Art. 69264E+69262 or other compatible mixing devices. Part of the Aqualite collection by Newform, designed by renowned architect Alberto Apostoli, this product exemplifies visual perfection and cutting-edge technology. The collection features harmonious, essential shapes that integrate seamlessly into walls, with light accents that enhance the surrounding space. Inspired by contemporary color trends, Aqualite offers extensive customization with 31 finish options, allowing for unique combinations of frame and plate colors, making each piece truly one-of-a-kind. A 3D file of the product is available for download, providing detailed visualization for design planning. Newform, an Italian interior design supplier founded in 1983, is celebrated for its innovative and stylish bathroom and kitchen fixtures, blending functionality with aesthetic appeal to cater to both residential and commercial markets globally.

PARK LIMITED EDITION - Deck mounted 5 hole bathtub tap with plate _ newform

newform > Tap

Art. 69789C - 5-hole deck-mounted bath group with plate and water supply from the spout, designed to elevate bathroom aesthetics with its refined blend of classical and contemporary styles, making it a perfect fit for international markets. This LIMITED EDITION PARK collection is available in two striking finishes: 62.093 GLOSSY GOLD-MATT BLACK and 05.093 CHROME-MATT BLACK, offering a luxurious touch to any space. A 3D file of the product is available for download, allowing for seamless integration into design plans. Manufactured by Newform, a renowned Italian interior design supplier founded in 1983, this product reflects the company’s dedication to innovative, stylish, and high-quality bathroom and kitchen fixtures, combining functionality with timeless design.

PARK LIMITED EDITION - Floor standing bathtub set with diverter with hand shower _ newform

newform > Tap

Art. 69785C - Bathgroup with floor pillar unions, an automatic diverter, a 150 cm brass LL flexible hose, and a showerhead. Part of the LIMITED EDITION PARK collection, this product is crafted to meet the demands of international markets, blending refined classical and contemporary aesthetics for a sophisticated look. Available in two striking finishes: 62.093 GLOSSY GOLD-MATT BLACK and 05.093 CHROME-MATT BLACK. A 3D file of the product is available for download, allowing for detailed visualization and planning. Manufactured by Newform, an esteemed Italian interior design company founded in 1983, known for its innovative and stylish bathroom and kitchen fixtures that combine functionality with timeless design. Explore more at www.newform.it.

PARK LIMITED EDITION - External bathtub tap with diverter _ newform

newform > Tap

**Art. 69740 - Exposed Bath Group with Automatic Diverter** This exquisite bath group, designed for the global stage, is part of the LIMITED EDITION PARK collection, offering a unique blend of refined classical and contemporary aesthetics to cater to sophisticated tastes. Available in two striking finishes: 62.093 GLOSSY GOLD-MATT BLACK and 05.093 CHROME-MATT BLACK, this product is a perfect fusion of elegance and functionality. A 3D file of the product is available for download, allowing for seamless integration into design projects. **Supplier Description:** Newform, an Italian interior design leader since 1983, is renowned for its innovative and stylish bathroom and kitchen fixtures, combining cutting-edge design with exceptional quality for both residential and commercial spaces.

XT - Countertop single handle washbasin mixer without waste _ newform

newform > Tap

The XT 4209 is a sleek, single-lever basin mixer with a long spout, designed without a pop-up waste set, offering a timeless and versatile aesthetic that seamlessly integrates into any modern or traditional bathroom design. As part of Newform's **Save Water** initiative, this mixer is engineered to reduce water consumption significantly, featuring a flow rate of just 5 liters per minute, which can save up to 50% in water usage while also lowering energy costs. Additionally, the product is **lead-free**, ensuring safer, healthier water for daily use, reflecting Newform's commitment to sustainability and user well-being. For added convenience, a downloadable 3D file of the product is available for design and planning purposes. Newform, an Italian interior design leader founded in 1983, is renowned for its innovative, high-quality bathroom and kitchen fixtures, blending cutting-edge design with functionality to cater to both residential and commercial spaces worldwide.

XT - Countertop single handle washbasin mixer _ newform

newform > Tap

The XT 4204 is a sleek, single-lever mixer designed for above-counter basins, featuring a long spout and a 1”1/4 pop-up waste set. As part of Newform's **Save Water** initiative, this mixer is engineered to reduce water flow to 5 l/m, cutting water usage by up to 50% while maintaining optimal performance. Crafted with **lead-free materials**, it prioritizes safety and sustainability, aligning with Newform's commitment to environmental responsibility and human health. The XT 4204 boasts a timeless, universally appealing design, blending seamlessly with both modern and traditional interiors. Additionally, a downloadable 3D file of the product is available for design and planning purposes. Newform, an Italian interior design leader since 1983, specializes in innovative, high-quality bathroom and kitchen fixtures, combining functionality with aesthetic excellence for residential and commercial spaces worldwide.

XT - Countertop washbasin mixer without waste _ newform

newform > Tap

The XT 4208 is a sleek, single-lever basin mixer without a pop-up waste set, designed with both elegance and sustainability in mind. As part of Newform's Save Water collection, this mixer features a reduced flow rate of 5 l/m, achieving up to 50% water savings while maintaining optimal performance, making it an eco-conscious choice for modern bathrooms. Crafted with lead-free materials, it ensures safety and durability, aligning with Newform's commitment to human health and environmental responsibility. The timeless, minimalist design of the XT 4208 blends seamlessly with various interior styles, from contemporary to traditional, offering universal appeal. Additionally, a downloadable 3D file of the product is available for design and planning purposes. Newform, an Italian interior design leader since 1983, is renowned for its innovative, high-quality bathroom and kitchen fixtures, combining cutting-edge technology with aesthetic excellence to serve both residential and commercial markets globally.

XT - Wall-mounted external bathtub mixer with diverter _ newform

newform > Tap

The XT 4240 is a sophisticated single-lever exposed bath mixer featuring an automatic diverter, blending timeless elegance with universal appeal to seamlessly integrate into any design trend, whether modern or traditional. This product is part of the XT line by Newform, an Italian interior design supplier renowned since 1983 for its innovative, high-quality bathroom and kitchen fixtures that combine functionality with aesthetic perfection. Newform’s global presence, with headquarters in Italy and branches in the US, Germany, and the UK, ensures its products meet international standards of design and performance. Additionally, a downloadable 3D file of the XT 4240 is available for detailed visualization and planning.

O'RAMA - Wall-mounted single handle washbasin mixer without waste _ newform

newform > Tap

The O'RAMA 68430E is a sleek, single-lever wall-mounted mixer group featuring a long spout and designed to pair seamlessly with concealed components, offering a modern and minimalist aesthetic. Part of Newform's Save Water collection, this mixer is engineered to reduce water flow to 5 l/m, achieving up to 50% water savings while maintaining optimal performance, reflecting the brand's commitment to sustainability and environmental responsibility. The O'RAMA line embodies a bold, geometric design with a solid, upward-reaching structure that exudes power and balance, complemented by customizable finishes such as chrome, black matte, or white lacquer for a personalized touch. A 3D file of the product is available for download, allowing for detailed visualization and integration into design projects. Newform, an Italian interior design leader since 1983, is renowned for its innovative, high-quality bathroom and kitchen fixtures that blend functionality with timeless elegance, catering to both residential and commercial spaces worldwide.

DAYTIME - Countertop 1 hole washbasin tap _ newform

newform > Tap

Art. 69025 - Single hole basin group featuring a 1” 1/4 pop-up waste set and 3/8” female connecting hoses, designed to elevate the elegance of your everyday life. Inspired by the timeless charm and style of "Old England," the DAYTIME collection seamlessly blends design with tradition, catering to even the most refined tastes. Its classic and sophisticated aesthetic shines in both traditional and contemporary settings, making it a versatile choice for any interior. Additionally, a 3D file of the product is available for download, allowing for detailed visualization and planning. Newform, an Italian interior design supplier founded in 1983, is renowned for its innovative and stylish bathroom and kitchen fixtures, combining functionality with aesthetic appeal to create durable, high-quality products for both residential and commercial spaces.

LINFA II - Recessed bathtub set with diverter with hand shower _ newform

newform > Tap

The LINFA and LINFA II collections offer a complete set of bathroom fixtures, including a deck-mounted mixer, spout, diverter, and a hand shower set, designed to embody a nature-inspired balance with a dynamic, energetic, and effortless aesthetic. These refined and minimalist collections are perfect for modern and contemporary spaces, blending functionality with sleek design. A 3D file of the product is available for download, allowing for detailed visualization and planning. Newform, the Italian supplier behind these collections, has been a leader in innovative interior design since 1983, specializing in high-quality bathroom and kitchen fixtures that combine durability, performance, and minimalist aesthetics, catering to both residential and commercial projects worldwide.

HEAD SHOWERS - Built-in steel overhead shower _ newform

newform > Shower

This stainless steel squared concealed head shower features a sleek, minimalist design with a raining jet for a luxurious shower experience, blending modern aesthetics with high functionality. The product is complemented by a downloadable 3D file, allowing for seamless integration into design projects. Manufactured by Newform, a renowned Italian interior design supplier founded in 1983, the company is celebrated for its innovative and stylish bathroom and kitchen fixtures, combining durability, performance, and timeless design to cater to both residential and commercial spaces worldwide.

OVERHEAD SHOWERS FOR CHROMOTHERAPY - Built-in 3-spray steel overhead shower _ newform

newform > Shower

Elevate your shower experience with this stainless steel concealed round head shower, featuring a versatile design that includes a raining jet, waterfall jet, atomizer jet, and an integrated multicolor chromotherapy lighting system. The chromotherapy function is designed to create an emotional ambiance, with warm colors inspiring joy and energy, cool tones promoting calm and meditation, and green offering a stabilizing, centering effect. This shower system allows your body to absorb different stimuli based on the color shades and their transition rhythms, enhancing relaxation and well-being. A downloadable 3D file of the product is available for detailed visualization and planning. Crafted by Newform, a renowned Italian interior design supplier established in 1983, this product reflects the brand's dedication to innovative, stylish, and high-quality bathroom and kitchen fixtures. Known for blending functionality with aesthetic appeal, Newform offers a wide range of products, from faucets to shower systems, designed for both residential and commercial spaces, with a focus on sleek, modern designs and durability.

NOBU - INOX AISI 316L - 1-spray stainless steel handshower _ Bossini

Bossini > Shower

The Nobu Stainless Steel Shower Set, featuring a sleek wall bracket and a durable Cromolux hose measuring 150 cm, embodies minimalist elegance with its AISI 316L stainless steel construction, ensuring maximum hygiene, easy maintenance, and eco-friendly recyclability. A 3D file of the product is available for download, allowing for detailed visualization and planning. Supplied by Bossini, a renowned Italian interior design company established in 1958, the shower set reflects the brand's legacy of high-quality, innovative designs that cater to both residential and commercial spaces, blending contemporary aesthetics with functional excellence.

APICE - ABS handshower _ Bossini

Bossini > Shower

The APICE ABS shut-off handspray, featuring a rain spray with 61 holes, combines sophisticated design with functionality to transform your shower into a luxurious experience. Its sleek, chiseled lines and cylindrical form create a lightweight, sculptural piece that doubles as a functional artwork. Available in classic finishes like chrome, brushed nickel, white, and black, the Apice collection elevates everyday routines into moments of indulgence through its striking beauty and ease of use. A 3D file of the product is available for download, allowing for detailed visualization and planning. Bossini, the Italian interior design supplier behind this product, has been a leader in the industry since its founding in 1958, renowned for its innovative, high-quality designs that blend contemporary aesthetics with functionality.

Dream 4 Getti - RGB CROMOTERAPIA - Contemporary style LED overhead shower _ Bossini

Bossini > Shower

The Dream/4 Showerhead by Bossini is a luxurious ceiling-mounted shower system designed to elevate your bathing experience with four versatile spray modes: a wide-rain jet, a soft nebulized jet, a powerful cascade, and a natural Kneipp jet, all enhanced by RGB LED lights and chromotherapy for a multisensory wellness experience. The showerhead features a patented air suction duct to minimize water stagnation, ensuring hygiene and durability. A low-voltage transformer, control keyboard, and flexible water connection make installation seamless, while the false ceiling design (570 x 470 mm) adds a modern touch to any bathroom. For added convenience, a 3D file of the product is available for download, allowing for precise planning and integration into your space. Bossini, an Italian interior design leader since 1958, is renowned for its innovative, high-quality products, blending contemporary aesthetics with functionality for residential and commercial spaces worldwide.

Dream 3 Sprays - LED LIGHTS - LED 3-spray overhead shower _ Bossini

Bossini > Shower

The Dream/3 Shower Head by Bossini is a luxurious ceiling-mounted shower system designed to transform your bathing experience into a multisensory retreat. Featuring three versatile spray modes—wide-rain, soft nebulized, powerful cascade, rain waterfall, and natural Kneipp jet—this showerhead offers a customizable experience tailored to your mood and preference. Enhanced with LED lights, a low-voltage transformer, a control keyboard, and a flexible water connection, the Dream/3 combines functionality with elegance. Its false ceiling installation and dimensions of 570 x 470 mm make it a seamless addition to modern bathrooms. A standout feature is the built-in air suction duct, a Bossini-patented innovation that minimizes water stagnation by efficiently draining residual water from the distribution chamber. For added convenience, a 3D file of the product is available for download, allowing for precise planning and integration into your space. Bossini, a renowned Italian interior design brand established in 1958, is celebrated for its innovative, high-quality products that blend contemporary aesthetics with functionality, making it a trusted name in both residential and commercial design worldwide.

IDEALRAIN NERO SETA - BC774 - Handshower _ Ideal Standard

Ideal Standard > Shower

Here’s a refined and expanded product description with a concise supplier overview and mention of the 3D file: *"This sleek handshower from the Idealrain collection features a stylish matt black finish, combining modern elegance with practical functionality for a luxurious shower experience. The 3D file of this product is available for download, allowing for seamless integration into your design plans. Manufactured by Ideal Standard—a trusted leader in bathroom solutions since 1873—the handshower reflects the brand’s commitment to innovative, high-quality fixtures designed for both residential and commercial spaces."* Let me know if you'd like any further adjustments!

CONNECT 2 - PS - Niche tempered glass shower cabin with folding door _ Ideal Standard

Ideal Standard > Shower

Here’s a refined and expanded product description with a concise supplier overview, including the 3D file availability: *"The CONNECT 2 - PS is a sleek, space-saving tempered glass shower cabin featuring a convenient folding door, designed to blend functionality with modern aesthetics. This niche solution is ideal for compact bathrooms without compromising on style or durability. A downloadable 3D file of the product is available for precise planning and visualization. Manufactured by Ideal Standard, a globally recognized leader in premium bathroom solutions since 1873, the product reflects the brand’s commitment to innovative design and quality craftsmanship."*