TABLE LAMP by Cinna

Sandra Medium settee with lumbar cushions

Cinna > Accessories

STRUCTURE Entirely made of foam with 2 different densities: polyether 21 kg/m3 - 3.2 kPa and polyether 28 kg/m3 - 4.8 kPa. COMFORT The seat and back are made of high-resilience Bultex polyurethane foam (36 kg/m3 - 2.8 kPa and 38 kg/m3 - 2.8 kPa). Entirely clad in ultra-soft polyurethane foam (45 kg/m3 - 1.8 kPa). Each item (except the footstool and armchair) comes with a lumbar cushion. MAKING-UP Cover clad with 480 g/m² polyester quilting, single-needle stitching. Covers may be removed by a professional.

Sandra Large settee with lumbar cushions

Cinna > Accessories

STRUCTURE Entirely made of foam with 2 different densities: polyether 21 kg/m3 - 3.2 kPa and polyether 28 kg/m3 - 4.8 kPa. COMFORT The seat and back are made of high-resilience Bultex polyurethane foam (36 kg/m3 - 2.8 kPa and 38 kg/m3 - 2.8 kPa). Entirely clad in ultra-soft polyurethane foam (45 kg/m3 - 1.8 kPa). Each item (except the footstool and armchair) comes with a lumbar cushion. MAKING-UP Cover clad with 480 g/m² polyester quilting, single-needle stitching. Covers may be removed by a professional.

Prado 2 Medium settee

Cinna > Sofa

STRUCTURE AND COMFORT The structure is composed of three-layer, crossed, webbed panels of chipboard clad with a polyether foam with a density of 40 kg/m³. The seat is made of high-resilience Bultex polyurethane foam, with densities of 36 kg/m³ and 38 kg/m³, and a resistance of 2.8 kPa. The back cushion is made of injected foam with a density of 60 kg/m³, moulded onto a metal insert equipped with elastic webbing with a new compartmented goose feather filling, composed of 10% down and 90% feathers, as well as a layer of 110 g/m² polyester quilting. Anti-slip system. The lumbar cushion is filled with new goose feathers, with a ratio of 10% down and 90% feathers. The optional armrest cushion is made of high-resilience Bultex polyurethane foam with a density of 35 kg/m³ and clad with 200 g/m² polyester quilting. MAKING-UP The quilted version features a quilted cover, sewn crosswise, without any seams on the seat. A single seam runs through the centre, but it's located on the settee’s structure. In this version, the cushion cannot be turned over to transform it into a bed, and the base is now a single piece. The setttee’s base is identical to that of the original Prado. Leather is not suitable due to the quilting being too fragmented. The back benefits from an anti-slip system and remains identical to that of the Prado. As with the latter, some fabric options will be limited for the bases.

Prado 2 Large settee depth 125

Cinna > Sofa

STRUCTURE AND COMFORT The structure is composed of three-layer, crossed, webbed panels of chipboard clad with a polyether foam with a density of 40 kg/m³. The seat is made of high-resilience Bultex polyurethane foam, with densities of 36 kg/m³ and 38 kg/m³, and a resistance of 2.8 kPa. The back cushion is made of injected foam with a density of 60 kg/m³, moulded onto a metal insert equipped with elastic webbing with a new compartmented goose feather filling, composed of 10% down and 90% feathers, as well as a layer of 110 g/m² polyester quilting. Anti-slip system. The lumbar cushion is filled with new goose feathers, with a ratio of 10% down and 90% feathers. The optional armrest cushion is made of high-resilience Bultex polyurethane foam with a density of 35 kg/m³ and clad with 200 g/m² polyester quilting. MAKING-UP The quilted version features a quilted cover, sewn crosswise, without any seams on the seat. A single seam runs through the centre, but it's located on the settee’s structure. In this version, the cushion cannot be turned over to transform it into a bed, and the base is now a single piece. The setttee’s base is identical to that of the original Prado. Leather is not suitable due to the quilting being too fragmented. The back benefits from an anti-slip system and remains identical to that of the Prado. As with the latter, some fabric options will be limited for the bases.

Prado Large settee depth 120

Cinna > Sofa

CONSTRUCTION & COMFORT Structure in panels of chipboard, webbed and clad in foam 50 kg/m³ and 110 g/m² quilting; seat cushion in polyurethane foam 36 kg/m³ and 110 g/m² quilting. Back cushion in injected foam 60 kg/m³ moulded onto a metal insert, equipped with elastic webbing and with a compartmented goose feather-filled comfort layer (10 % down / 90 % feathers) with 110 g/m² quilting. Anti-slip system. Lumbar cushion filled with new goose feathers (10 % down / 90 % feathers). Optional armrest cushion in polyurethane foam 35 kg/m³ and 200 g/m² quilting. The reverse of the seat cushion is covered in mattress ticking: simply turn the cushion and use the optional 100 % white cotton fitted sheet to create a comfortable sleep area (width 100 or 120 cm). With the exception of the base in leather or microfibre, all elements of the model PRADO have removable covers. The Oda pedestal table (designed to slide above the seat cushion thanks to their cantilevered tops) is designed as the perfect complement to this settee, making it possible to create corner compositions, for example, or to add occasional tables on which one can place one's personal effects.

Prado Medium settee - d 120

Cinna > Sofa

CONSTRUCTION & COMFORT Structure in panels of chipboard, webbed and clad in foam 50 kg/m³ and 110 g/m² quilting; seat cushion in polyurethane foam 36 kg/m³ and 110 g/m² quilting. Back cushion in injected foam 60 kg/m³ moulded onto a metal insert, equipped with elastic webbing and with a compartmented goose feather-filled comfort layer (10 % down / 90 % feathers) with 110 g/m² quilting. Anti-slip system. Lumbar cushion filled with new goose feathers (10 % down / 90 % feathers). Optional armrest cushion in polyurethane foam 35 kg/m³ and 200 g/m² quilting. The reverse of the seat cushion is covered in mattress ticking: simply turn the cushion and use the optional 100 % white cotton fitted sheet to create a comfortable sleep area (width 100 or 120 cm). With the exception of the base in leather or microfibre, all elements of the model PRADO have removable covers. The Oda pedestal table (designed to slide above the seat cushion thanks to their cantilevered tops) is designed as the perfect complement to this settee, making it possible to create corner compositions, for example, or to add occasional tables on which one can place one's personal effects.

Prado Medium settee - d 100

Cinna > Sofa

CONSTRUCTION & COMFORT Structure in panels of chipboard, webbed and clad in foam 50 kg/m³ and 110 g/m² quilting; seat cushion in polyurethane foam 36 kg/m³ and 110 g/m² quilting. Back cushion in injected foam 60 kg/m³ moulded onto a metal insert, equipped with elastic webbing and with a compartmented goose feather-filled comfort layer (10 % down / 90 % feathers) with 110 g/m² quilting. Anti-slip system. Lumbar cushion filled with new goose feathers (10 % down / 90 % feathers). Optional armrest cushion in polyurethane foam 35 kg/m³ and 200 g/m² quilting. The reverse of the seat cushion is covered in mattress ticking: simply turn the cushion and use the optional 100 % white cotton fitted sheet to create a comfortable sleep area (width 100 or 120 cm). With the exception of the base in leather or microfibre, all elements of the model PRADO have removable covers. The Oda pedestal table (designed to slide above the seat cushion thanks to their cantilevered tops) is designed as the perfect complement to this settee, making it possible to create corner compositions, for example, or to add occasional tables on which one can place one's personal effects.

Prado Square settee

Cinna > Sofa

CONSTRUCTION & COMFORT Structure in panels of chipboard, webbed and clad in foam 50 kg/m³ and 110 g/m² quilting; seat cushion in polyurethane foam 36 kg/m³ and 110 g/m² quilting. Back cushion in injected foam 60 kg/m³ moulded onto a metal insert, equipped with elastic webbing and with a compartmented goose feather-filled comfort layer (10 % down / 90 % feathers) with 110 g/m² quilting. Anti-slip system. Lumbar cushion filled with new goose feathers (10 % down / 90 % feathers). Optional armrest cushion in polyurethane foam 35 kg/m³ and 200 g/m² quilting. The reverse of the seat cushion is covered in mattress ticking: simply turn the cushion and use the optional 100 % white cotton fitted sheet to create a comfortable sleep area (width 100 or 120 cm). With the exception of the base in leather or microfibre, all elements of the model PRADO have removable covers. The Oda pedestal table (designed to slide above the seat cushion thanks to their cantilevered tops) is designed as the perfect complement to this settee, making it possible to create corner compositions, for example, or to add occasional tables on which one can place one's personal effects.

Prado cadence Large settee depth 120

Cinna > Sofa

CONFIGURATION OF THE MODEL PRADO ÉDITION SPÉCIALE : - Base part A (upper section) : mattress upholstered in the exclusive fabric CADENCE Nature. A new, elegant and resistant covering material, elevated by dynamic lines and soft, natural shades. A fabric which affirms a strong, contemporary visual identity, exclusive to this version of PRADO. Composition : 58% polyester/42% polyacrylic – resistance to wear : 16,000 Martindale revolutions - lightfastness : 6–7 – tear test : 130 N / 290 N - weight : 1 194 g/ml. - Base part B (lower section), back cushions and bolsters exclusively upholstered in SCAN beige. A natural, soothing tone, ideal for a soft, contemporary ambiance.

Kobold soft Chaise longue with armrest

Cinna > Chair

STRUCTURE Seat frame in spruce plywood panels, clad in ash veneered MDF panel. Armrests and back structure in ash veneered MDF, clad in Bultex foam (48kg/m3 – 7.1kPa) and 110g/m² polyester quilting. Base in stained ash and for hidden areas in black lacquered beech. COMFORT The seat is composed of pocket springs and Bultex high resilience polyurethane foam (38 kg/m3 - 3.6 kPa): for the part integrated into the seat frames. The seat cushion is made of Bultex foam (38 kg/m3 – 3.6 kPa) with goose feathers and clad in 110 g/m² polyester quilting. Parallel bedding of 200x90 supplied with a mattress protector. The comfort of the backrests is achieved by a set of backrest cushions and kidney wedges, all in goose feathers. The comfort of the backs is achieved by a set of back cushions and bolsters in goose feathers. CONSTRUCTION Two satin stitches on the seat cushion. Cover may be removable by a professional. When the model KOBOLD SOFT is made up in ALPA, the bourdon point stitching on the seat is replaced by straight stitch.

Kobold classic 1-armed settee with short unit

Cinna > Sofa

STRUCTURE Seat frame in spruce plywood panels, clad in ash veneered MDF panel. Armrests and back structure in ash veneered MDF, clad in Bultex foam (48kg/m3 – 7.1kPa) and 110g/m² polyester quilting. Base in stained ash and for hidden areas in black lacquered beech. COMFORT The seat is composed of pocket springs and Bultex high resilience polyurethane foam (38 kg/m3 - 3.6 kPa): for the part integrated into the seat frames. The seat cushion is made of Bultex foam (36 kg/m3 – 2.8 kPa + 38kg/m3 – 2.8 kPa) and clad in 110 g/m² polyester quilting. Parallel bedding of 200x90. The comfort of the backs is achieved by a set of back cushions in Bultex foam (38kg/m3 – 2.8 kPa) + goose feathers and bolsters in goose feathers. CONSTRUCTION Two satin stitches on the seat cushion. Double piping on the seat and back cushions, simple piping on the lumbar cushions. Cover may be removable by a professional. When the model KOBOLD CLASSIC is made up in ALCANTARA, ALPA, DIVA, SOFT TOUCH, the bourdon point stitching on the seat is replaced by straight stitch.

Ottoman Large settee

Cinna > Sofa

CONSTRUCTION Base and external section in polyether foam 28 kg/m³ - 4.8 kPa. Armchairs are available in fixed or rotating versions (with base in 6 mm thick steel, finished in Epoxy black lacquer). COMFORT Enveloping 'bucket seat'-style seat and back in moulded polyurethane foam 35 kg/m³ - 3.2 kPa, with comfort layer in high resilience polyurethane Bultex foam 38 kg/m³ - 3.6 kPa. MAKING-UP Cover is removable (by a professional) and is held in place by lacings at the junction of the seat and back, and by gripper strips on the underside. Cover quilted with polyether foam on the seat/back section, and with 100g/m² polyester quilting on the vertical exterior. Important : the swivelling armchair does not have removable covers.

Ottoman Small settee

Cinna > Sofa

CONSTRUCTION Base and external section in polyether foam 28 kg/m³ - 4.8 kPa. Armchairs are available in fixed or rotating versions (with base in 6 mm thick steel, finished in Epoxy black lacquer). COMFORT Enveloping 'bucket seat'-style seat and back in moulded polyurethane foam 35 kg/m³ - 3.2 kPa, with comfort layer in high resilience polyurethane Bultex foam 38 kg/m³ - 3.6 kPa. MAKING-UP Cover is removable (by a professional) and is held in place by lacings at the junction of the seat and back, and by gripper strips on the underside. Cover quilted with polyether foam on the seat/back section, and with 100g/m² polyester quilting on the vertical exterior. Important : the swivelling armchair does not have removable covers.

Saparella Settee

Cinna > Sofa

CONSTRUCTION Base and sides in polyether foam 28kg/m3 - 4.8kPa. The three items sit on a ventilated fabric base. COMFORT Seat and back made from high resilience polyurethane Bultex foam (36kg/m3 - 3.2 kPa), clad in a comfort layer of high resilience polyurethane Bultex foam (38 kg/m3 - 3.6 kPa). MAKING-UP Cover quilted with 200g/m² polyester. 5mm baguette stitch. Removable covers. Important: no baguette stitch when model is upholstered in BYRAM, ELLA, FESTA, LHUIS or TONA.

G10 Settee upholstered arms

Cinna > Sofa

STRUCTURE Back composed of plywood panels clad with polyurethane foam and 110 g/m² polyester quilting. Mechanically-soldered base in Epoxy black lacquer finish. Armrests in moulded beech plywood with stained ash veneer. COMFORT Suspension of seat via elastic webbing. The seat and back are made of high resilience polyurethane Bultex foam (38 kg/m3 - 3,6 kPa and 38 kg/m3 - 2,8 kPa). 110 g/m² polyester quilting.

G10 Settee wood arms

Cinna > Sofa

STRUCTURE Back composed of plywood panels clad with polyurethane foam and 110 g/m² polyester quilting. Mechanically-soldered base in Epoxy black lacquer finish. Armrests in moulded beech plywood with stained ash veneer. COMFORT Suspension of seat via elastic webbing. The seat and back are made of high resilience polyurethane Bultex foam (38 kg/m3 - 3,6 kPa and 38 kg/m3 - 2,8 kPa). 110 g/m² polyester quilting.

Pukka Medium settee

Cinna > Sofa

CONSTRUCTION : Foams of various densities and a base of high resilience polyurethane foam (48 kg/m3 – 7.1 kPa). COMFORT : The back is composed of high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa) clad in ultra-flexible polyurethane foam (50 kg/m3 – 1.8 kPa). The seat is composed of high resilience polyurethane Bultex foam (38 kg/m3 – 3.6 kPa et 38 kg/m3 – 2.8 kPa) clad in ultra-flexible polyurethane foam (50 kg/m3 – 1.8 kPa) MAKING-UP : Fabrics with elastic properties must be selected. Cover may be removed by a professional.

Paipaï Large settee

Cinna > Sofa

CONSTRUCTION Settee and love seat: structure of seat and back in mechanically-soldered steel. Structure of armrest in technical fabric for flexibility. A sheet of steel forms the joint between seat and armrest. The screws are visible and make a nice aesthetic touch. Footstool : structure of seat in panels of multi-ply. Structure clad in polyether foam and high resilience polyurethane Bultex foam. The entire structure is clad in 100 g/m² and 200g/m² polyester quilting. Legs in matt black steel Ø 18 mm. COMFORT Settee and love seat : suspension of seat and back via elastic webbing. Structure of seat in high resilience Bultex foam (38 kg/m3 - 3.6 kPa), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and 200 g/m² polyester quilting. Back in high resilience Bultex foam (38 kg/m3 - 3.6 kPa,), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and polyester quilting (200 g/m² and 100 g/m²). Lumbar cushion (660 x 300mm) filled with goose feathers. Footstool : structure of seat in high resilience Bultex foam (38 kg/m3 - 3.6 kPa), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and 200 g/m² polyester quilting. MAKING-UP Structure of back: 5 mm bourrelet stitch. Removable covers in both fabric and leather. Covering material recommendations: Harald, Gandino, Match, Canvas, leathers.

Paipaï Medium settee

Cinna > Sofa

CONSTRUCTION Settee and love seat: structure of seat and back in mechanically-soldered steel. Structure of armrest in technical fabric for flexibility. A sheet of steel forms the joint between seat and armrest. The screws are visible and make a nice aesthetic touch. Footstool : structure of seat in panels of multi-ply. Structure clad in polyether foam and high resilience polyurethane Bultex foam. The entire structure is clad in 100 g/m² and 200g/m² polyester quilting. Legs in matt black steel Ø 18 mm. COMFORT Settee and love seat : suspension of seat and back via elastic webbing. Structure of seat in high resilience Bultex foam (38 kg/m3 - 3.6 kPa), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and 200 g/m² polyester quilting. Back in high resilience Bultex foam (38 kg/m3 - 3.6 kPa,), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and polyester quilting (200 g/m² and 100 g/m²). Lumbar cushion (660 x 300mm) filled with goose feathers. Footstool : structure of seat in high resilience Bultex foam (38 kg/m3 - 3.6 kPa), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and 200 g/m² polyester quilting. MAKING-UP Structure of back: 5 mm bourrelet stitch. Removable covers in both fabric and leather. Covering material recommendations: Harald, Gandino, Match, Canvas, leathers.

LARGE SETTEE WITH ARMREST B

Cinna > Curtain

LARGE ASYMMETRICAL SETTEE

Cinna > Curtain

Exclusif Small settee with armrest b

Cinna > Sofa

CONSTRUCTION & COMFORT The structure is mainly in multi-ply, thus making a significant reduction in terms of weight. For optimum comfort the seat cushion is supported by a webbed suspension. IMPORTANT: POSSIBILITY OF 2 DIFFERENT FOOT HEIGHTS: 30 mm OR 65 mm. PLEASE SPECIFY YOUR CHOICE WHEN PLACING YOUR ORDER. Feather-filled seat and back cushions (10% feathers/90% down), compressibility H 88 mm with compartmented liner on the seat, both with a core of high resilience polyurethane Bultex foam (30 kg/m³ - 1.8 kPa). Flat edges of seat cushions are quilted with a layer of polyester (200 g/m²). Seat cushions are anchored to the frame by a combination of zip fastenings. 57 x 57 cm cushion filled with 100% duck feathers. For a firmer level of comfort, seat cushions may be made entirely from high resilience polyurethane Bultex foam (dominant 2.6 kPa) : please specify when placing order. Headrest comprising a base in chromed steel wire (Ø 10 mm) clad in high resilience polyurethane Bultex foam (dominant 38 kg/m³ - 3.6 kPa) and 300 g/m² polyester quilting. MAKING-UP Removable cushion covers. Removable frame cover (NB except microfibres or leather), although is necessary to remove the armrests in order to do so - this can be done without difficulty. Bicolour interpretations may be created by specifying a different colour/fabric for the back and lumbar cushions. In the case of the large settees (with and without arms), large 1-arm settees and large asymmetrical settees, each ite

Exclusif Large asymmetrical settee

Cinna > Sofa

CONSTRUCTION & COMFORT The structure is mainly in multi-ply, thus making a significant reduction in terms of weight. For optimum comfort the seat cushion is supported by a webbed suspension. IMPORTANT: POSSIBILITY OF 2 DIFFERENT FOOT HEIGHTS: 30 mm OR 65 mm. PLEASE SPECIFY YOUR CHOICE WHEN PLACING YOUR ORDER. Feather-filled seat and back cushions (10% feathers/90% down), compressibility H 88 mm with compartmented liner on the seat, both with a core of high resilience polyurethane Bultex foam (30 kg/m³ - 1.8 kPa). Flat edges of seat cushions are quilted with a layer of polyester (200 g/m²). Seat cushions are anchored to the frame by a combination of zip fastenings. 57 x 57 cm cushion filled with 100% duck feathers. For a firmer level of comfort, seat cushions may be made entirely from high resilience polyurethane Bultex foam (dominant 2.6 kPa) : please specify when placing order. Headrest comprising a base in chromed steel wire (Ø 10 mm) clad in high resilience polyurethane Bultex foam (dominant 38 kg/m³ - 3.6 kPa) and 300 g/m² polyester quilting. MAKING-UP Removable cushion covers. Removable frame cover (NB except microfibres or leather), although is necessary to remove the armrests in order to do so - this can be done without difficulty. Bicolour interpretations may be created by specifying a different colour/fabric for the back and lumbar cushions. In the case of the large settees (with and without arms), large 1-arm settees and large asymmetrical settees, each ite

Exclusif Small asymmetrical settee

Cinna > Sofa

CONSTRUCTION & COMFORT The structure is mainly in multi-ply, thus making a significant reduction in terms of weight. For optimum comfort the seat cushion is supported by a webbed suspension. IMPORTANT: POSSIBILITY OF 2 DIFFERENT FOOT HEIGHTS: 30 mm OR 65 mm. PLEASE SPECIFY YOUR CHOICE WHEN PLACING YOUR ORDER. Feather-filled seat and back cushions (10% feathers/90% down), compressibility H 88 mm with compartmented liner on the seat, both with a core of high resilience polyurethane Bultex foam (30 kg/m³ - 1.8 kPa). Flat edges of seat cushions are quilted with a layer of polyester (200 g/m²). Seat cushions are anchored to the frame by a combination of zip fastenings. 57 x 57 cm cushion filled with 100% duck feathers. For a firmer level of comfort, seat cushions may be made entirely from high resilience polyurethane Bultex foam (dominant 2.6 kPa) : please specify when placing order. Headrest comprising a base in chromed steel wire (Ø 10 mm) clad in high resilience polyurethane Bultex foam (dominant 38 kg/m³ - 3.6 kPa) and 300 g/m² polyester quilting. MAKING-UP Removable cushion covers. Removable frame cover (NB except microfibres or leather), although is necessary to remove the armrests in order to do so - this can be done without difficulty. Bicolour interpretations may be created by specifying a different colour/fabric for the back and lumbar cushions. In the case of the large settees (with and without arms), large 1-arm settees and large asymmetrical settees, each ite

Uncover Large settee version b – stretch fabrics

Cinna > Sofa

CONSTRUCTION An assembly of varying densities of high resilience polyurethane Bultex foam and polyether foam (base). Frame of footstool in 3-layer particleboard, with black polypropylene gliders. COMFORT Structure in high resilience Bultex foam (36kg/m3 - 2.7 kPa, 38 kg/m3 - 3.6 kPa). Base in polyether foam (28 kg/m3 - 4.8kPa, 34 kg/m3 - 6.4 kPa). Core of settee armrests in moulded foam, density 42 kg/m3 – 48 kPa. The entire structure is clad in 110 g/m² polyester quilting. Settees are equipped with a feather-filled cushion (40 cm x 40 cm) as standard, covered in the same covering material/colour as the main cover, but without the stitched motif. This cushion is also priced separately should more be required. MAKING-UP Only stretch fabrics may be used. Fully removable covers. IMPORTANT : When the model UNCOVER (except armchair) is upholstered in ARDA, CAPA, MILLA or MOSAÏC 2 there is a transversal seam on the rear of the back.

Uncover Medium settee version b – stretch fabrics

Cinna > Sofa

CONSTRUCTION An assembly of varying densities of high resilience polyurethane Bultex foam and polyether foam (base). Frame of footstool in 3-layer particleboard, with black polypropylene gliders. COMFORT Structure in high resilience Bultex foam (36kg/m3 - 2.7 kPa, 38 kg/m3 - 3.6 kPa). Base in polyether foam (28 kg/m3 - 4.8kPa, 34 kg/m3 - 6.4 kPa). Core of settee armrests in moulded foam, density 42 kg/m3 – 48 kPa. The entire structure is clad in 110 g/m² polyester quilting. Settees are equipped with a feather-filled cushion (40 cm x 40 cm) as standard, covered in the same covering material/colour as the main cover, but without the stitched motif. This cushion is also priced separately should more be required. MAKING-UP Only stretch fabrics may be used. Fully removable covers. IMPORTANT : When the model UNCOVER (except armchair) is upholstered in ARDA, CAPA, MILLA or MOSAÏC 2 there is a transversal seam on the rear of the back.

Uncover Chaise longue

Cinna > Chair

CONSTRUCTION An assembly of varying densities of high resilience polyurethane Bultex foam and polyether foam (base). Frame of footstool in 3-layer particleboard, with black polypropylene gliders. COMFORT Structure in high resilience Bultex foam (36kg/m3 - 2.7 kPa, 38 kg/m3 - 3.6 kPa). Base in polyether foam (28 kg/m3 - 4.8kPa, 34 kg/m3 - 6.4 kPa). Core of settee armrests in moulded foam, density 42 kg/m3 – 48 kPa. The entire structure is clad in 110 g/m² polyester quilting. Settees are equipped with a feather-filled cushion (40 cm x 40 cm) as standard, covered in the same covering material/colour as the main cover, but without the stitched motif. This cushion is also priced separately should more be required. MAKING-UP Only stretch fabrics may be used. Fully removable covers. IMPORTANT : When the model UNCOVER (except armchair) is upholstered in ARDA, CAPA, MILLA or MOSAÏC 2 there is a transversal seam on the rear of the back.

Plumy Large settee

Cinna > Sofa

CONSTRUCTION Structuring base in polyether foam (28kg/m3 - 4.0 kPa). COMFORT Seat and back in high resilience polyurethane Bultex foam (38 kg/m3 - 3.6 kPa). Seat and back cushions : filled with goose feathers (85% feathers /15% down), with compartmented liner. MAKING-UP Fully removable cover, quilted with 200/m² polyester. Reverse of cushions available in 2 versions : in cloth, or upholstered in the main covering material. Choice of 3 colours for the zips (always matched to the cloth backing in the case of the version with cloth backing : matt black, pearl grey or ivory - please specify your choice when placing your order.

Plumy Medium settee

Cinna > Sofa

CONSTRUCTION Structuring base in polyether foam (28kg/m3 - 4.0 kPa). COMFORT Seat and back in high resilience polyurethane Bultex foam (38 kg/m3 - 3.6 kPa). Seat and back cushions : filled with goose feathers (85% feathers /15% down), with compartmented liner. MAKING-UP Fully removable cover, quilted with 200/m² polyester. Reverse of cushions available in 2 versions : in cloth, or upholstered in the main covering material. Choice of 3 colours for the zips (always matched to the cloth backing in the case of the version with cloth backing : matt black, pearl grey or ivory - please specify your choice when placing your order.

Murtoli Settee

Cinna > Sofa

STRUCTURE Structure of seat: mechanically-soldered frame. The invisible screws under the base are grey for the outdoor version and black for the indoor version. Structure of backrest cushion: ABS plate (outdoor) or panel of particleboard (indoor). The back cushions of the indoor and outdoor versions have the same weight. COMFORT Suspension via polypropylene slats reinforced with fibreglass. The seat is composed of high resilience polyurethane Bultex foam (38 kg/m3 – 3.6 kPa and 38 kg/m3 – 2.8 kPa). The back cushion is composed of high resilience polyurethane Bultex foam (42 kg/m3 – 4.8 kPa and 26 kg/m3 – 1.4 kPa) clad in ultra-flexible foam (45 kg/m3 – 1.8 kPa). Its interior is fitted with an anti-slip system. The bolster is made from high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa). COVER Covers quilted with 110 g/m² polyester. Baguette stitching and twin-needle stitching on seat and back cushions ; baguette stitching on bolster. Covers may be removed by a professional, except for a base in leather or microfibre.

Amédée Settee

Cinna > Sofa

CONSTRUCTION structure of seat in 3-layer particleboard ; structure of back in thermoformed ABS. Base in black MDF panels in the case of the settee and fixed armchair, or in 8 mm thick Epoxy black lacquered steel in the case of the rotating armchair. In the case of the footstool, the structure is in 3-layer particleboard. COMFORT elastic webbing and high resilience polyurethane foam (36 kg/m3 - 2.8 kPa) on the seat. High resilience polyurethane foam (26 kg/m3 - 1.4 kPa) on the back. Polyurethane foam (38 kg/m3 - 3.6 kPa) for the footstool. MAKING-UP cover quilted with 110g/m² polyester with, baguette stitch detailing; cover may be removed by a professional. Lumbar and armrest cushions are integral to the cover: they are stitched every 5 cm and quilted with ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa).

Grand angle Large settee with broad armrest without lumbar cushion

Cinna > Accessories

CONSTRUCTION Structure of seat: webbed metal frame. Structure of backrest : panels 3-layer plywood with articulated headrest. Armrest composed of panels of plywood. COMFORT Seat composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa) and ultra-flexible foam (45 kg/m3 – 1.8 kPa) with comfort layer of feathers (goose feathers, of which 15% down). Backrest composed of high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa) clad in ultra-flexible foam (45 kg/m3 – 1.8 kPa). Feather-filled back (lumbar) cushion (goose feathers, of which 15% down). MAKING-UP Backrest quilted with stretch fabric to retain pleating on rear of backrest. Cover quilted with 110 g/m² polyester.

Grand angle Large settee with slim armrest without lumbar cushion

Cinna > Accessories

CONSTRUCTION Structure of seat: webbed metal frame. Structure of backrest : panels 3-layer plywood with articulated headrest. Armrest composed of panels of plywood. COMFORT Seat composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa) and ultra-flexible foam (45 kg/m3 – 1.8 kPa) with comfort layer of feathers (goose feathers, of which 15% down). Backrest composed of high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa) clad in ultra-flexible foam (45 kg/m3 – 1.8 kPa). Feather-filled back (lumbar) cushion (goose feathers, of which 15% down). MAKING-UP Backrest quilted with stretch fabric to retain pleating on rear of backrest. Cover quilted with 110 g/m² polyester.

Grand angle Small settee with slim armrest without lumbar cushion

Cinna > Accessories

CONSTRUCTION Structure of seat: webbed metal frame. Structure of backrest : panels 3-layer plywood with articulated headrest. Armrest composed of panels of plywood. COMFORT Seat composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa) and ultra-flexible foam (45 kg/m3 – 1.8 kPa) with comfort layer of feathers (goose feathers, of which 15% down). Backrest composed of high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa) clad in ultra-flexible foam (45 kg/m3 – 1.8 kPa). Feather-filled back (lumbar) cushion (goose feathers, of which 15% down). MAKING-UP Backrest quilted with stretch fabric to retain pleating on rear of backrest. Cover quilted with 110 g/m² polyester.

Telen Module a

Cinna > Curtain

CONSTRUCTION Structure of seat : 3-layer plywood. Structure of back cushion: panel of particleboard. COMFORT The seat is composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa and 38 kg/m3 – 2.8 kPa) clad in 110 g/m² polyester quilting. The back cushion is composed of high resilience polyurethane Bultex foam (42 kg/m3 – 4.8 kPa and 26 kg/m3 – 1.4 kPa) clad in ultra-flexible polyurethane foam (45 kg/m3 – 1.8 kPa). Anti-slip system on lower face. Clad in 110 g/m² polyester quilting. MAKING-UP Twin-needle stitching on seat ; baguette and twin-needle stitching on the back cushion. Covers may be removed by a professional.

Telen Module b2

Cinna > Curtain

CONSTRUCTION Structure of seat : 3-layer plywood. Structure of back cushion: panel of particleboard. COMFORT The seat is composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa and 38 kg/m3 – 2.8 kPa) clad in 110 g/m² polyester quilting. The back cushion is composed of high resilience polyurethane Bultex foam (42 kg/m3 – 4.8 kPa and 26 kg/m3 – 1.4 kPa) clad in ultra-flexible polyurethane foam (45 kg/m3 – 1.8 kPa). Anti-slip system on lower face. Clad in 110 g/m² polyester quilting. MAKING-UP Twin-needle stitching on seat ; baguette and twin-needle stitching on the back cushion. Covers may be removed by a professional.

Telen Module b1

Cinna > Curtain

CONSTRUCTION Structure of seat : 3-layer plywood. Structure of back cushion: panel of particleboard. COMFORT The seat is composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa and 38 kg/m3 – 2.8 kPa) clad in 110 g/m² polyester quilting. The back cushion is composed of high resilience polyurethane Bultex foam (42 kg/m3 – 4.8 kPa and 26 kg/m3 – 1.4 kPa) clad in ultra-flexible polyurethane foam (45 kg/m3 – 1.8 kPa). Anti-slip system on lower face. Clad in 110 g/m² polyester quilting. MAKING-UP Twin-needle stitching on seat ; baguette and twin-needle stitching on the back cushion. Covers may be removed by a professional.

Ipanema Curved settee

Cinna > Sofa

CONSTRUCTION Structure of armrest and backrest in mechanically-soldered tubular steel clad in Bultex foam and 110g/m² polyester quilting. Structure of seat: majority multi-ply, which makes each piece significantly lighter, clad in polyether foam and 110g/m² polyester quilting. Matt black round legs H 30 mm Ø 50mm, concealed beneath the structure. COMFORT Suspension of seat via elastic webbing. Seat cushion in high resilience Bultex foam (36kg/m3 - 2.8 kPa, 42kg/m3 – 4.8 kPa) and 110g/m² polyester quilting. Structure of seat clad in 110g/m² polyester quilting. Comfort of backrest provided by a combination of feather-filled cushions: large cushions filled with new duck feathers (10% down / 90% feathers); small cushions filled with new duck feathers (15% feathers).

Cover Medium settee

Cinna > Sofa

CONSTRUCTION Structure of settees in high resilience Bultex foam ; footstool has a wooden carcase made from 3-layer particleboard. Black polypropylene gliders. COMFORT High resilience Bultex foam (36 kg/m3 - 2.7 kPa, 38 kg/m3 - 3.6 kPa). Polyether foam (28 kg/m3 - 4.8 kPa, 34 kg/m3 - 6.4 kPa). Core of settee armrests in moulded foam. Settees are systematically supplied with a 40 x 40 cm feather-filled cushion, upholstered in the same covering material as the main cover. This cushion is also priced separately to enable additional cushions to be ordered ; additional cushions may be made up in any fabric or leather from the collection. MAKING-UP The medium and large Cover settees are composed of a base and a 'cover', which is draped over the base and is held in position by toggles at the rear of the seat. These items may be bi-colour and/or bi-material. Base is covered in fabric (to order) + base cloth. The stitching of the cover follows the outline of the back and armrests, creating a geometric effect which appears completely random. The stitching serves to 'quilt' the covering fabric used, whilst the upper and lower fabrics act to sandwich 300 g/m2 polyester quilting. Progressive V-shaped motifs (denser towards the middle of the seat and less so at the edges). The cover may be removed easily and may be dry cleaned. Footstool : baguette stitching around the edges. Cover is quilted with 110 g/m2 polyester.

Okura Medium settee low back

Cinna > Sofa

CONSTRUCTION Seat in panels of 3-layer particleboard, cut and clad in polyether foam and 110 g/m2 polyester quilting. COMFORT Webbed suspension on seat. Back consists of a mechanically-soldered steel structure clad in injected polyurethane foam and 110 g/m2 polyester quilting. Seat cushion in high resilience polyurethane Bultex foam (36kg/m3 - 2.8kPa) and 110 g/m2 polyester quilting. Compartmented back cushion filled with new goose feathers (10% down / 90% feathers). High back cushion with structure in mechanically-soldered steel clad in high resilience polyurethane Bultex 26kg/m3 - 1.4kPa and 110g/m2 polyester quilting.

SPIN - Highboard / display cabinet

Capo d’Opera > Cabinet

ESTREMI - Round glass table

Capo d’Opera > Table

MAGIC - Rectangular coffee table in sheet metal and base in MDF

Capo d’Opera > Coffee table

ROMANA - Beech chair

OAK > Chair

Alight Ottomans

Steelcase > Pouf

Alight offers stylish, impromptu seating that flexes to support teams of any size. With a low profile perfect for casual and collaborative spaces, Alight sets the stage for creativity in a relaxed environment.

Hand/Tea Towel 'Cake Server'

Jade + Amber > Accessories

Shop unique curated French tea towel and hand towels, made in France, French kitchen decor, French linen table, beautiful tea towels, designer tea towels, Toorak, Armadale, Melbourne, Sydney, Brisbane

Lino Bed - Solid 90x200 cm

Noah Living > Accessories

The Noah Living bed 90x200 cm: Modern & sustainable bed design combined with high-quality manufacture from natural materials in Europe. The solid wood bed can be expanded with bed accessories, such as a bedside table and various bed headboards, and can be changed in color and size. Free shipping + returns!

Lino Bed - Solid 160x200 cm

Noah Living > Accessories

The Noah Living bed 160x200 cm: Modern & sustainable bed design combined with high quality manufacturing from natural materials in Europe. The solid wood bed can be expanded with bed accessories, such as a bedside table and various bed headboards, and can be changed in color and size. Free shipping + returns!

Lino Bed - Solid 200x220 cm

Noah Living > Accessories

The Noah Living bed 200x220 cm: Modern & sustainable bed design combined with high quality manufacturing from natural materials in Europe. The solid wood bed can be expanded with bed accessories, such as a bedside table and various bed headboards, and can be changed in color and size. Free shipping + returns!

Lino Bed - Solid 180x200 cm

Noah Living > Accessories

The Noah Living bed 180x200 cm: Modern & sustainable bed design combined with high-quality manufacture from natural materials in Europe. The solid wood bed can be expanded with bed accessories, such as a bedside table and various bed headboards, and can be changed in color and size. Free shipping + returns!

DISPLAY CABINET

Cinna > Cabinet

LINENS

Cinna > Coffee table

TABLE LAMP

Cinna > Table lamp

TABLE LAMP

Cinna > Table lamp

TABLE LAMP

Cinna > Table lamp

Ease Portable Lamp

Muuto > Table lamp

Inspired by shapes of traditional table lamps, the Ease Portable Lamp transforms this typology into a carriable size suitable to take wherever. Ease offers a high-quality dimmable, no-glare light with 3 levels, striking a balance between atmospheric and functional light. The design has a distinct lightness to it, with the top and bottom gently touching. A slightly flared bottom mimics the lip of a vase in a grounding gesture that allows the base to be slimmer and easier to grab. Ease Portable Lamp is a humble friend with a strong character that works alone or in repetition in any setting; from the bedside, reading nook and home office to the café table, co-working space or library. ​

Tip Table Lamp

Muuto > Table lamp

Created from the idea of stripping a design down to its essentials, the Tip Table Lamp is an example of simple, functional design with careful attention to detail. Offering direct as well as ambient light, the lamp's adjustable head and arm feature an opal diffuser and dimmer function that effortlessly alters the volume of light.

Cosy In Grey Table Lamp

Muuto > Table lamp

With its modern shape in mouth-blown glass, the Cosy In Grey Table Lamp provides gentle lighting through its dimmable naked bulb, encased in smoked grey glass. Place the Cosy In Grey Table Lamp in any space for a new perspective on ambient lighting.

Halo Portable Light Bronze

Astro > Table lamp

Halo is a portable lamp that brings comfortable task lighting to any space in your home, including bedside tables, work surfaces or the living room. Available in Light Bronze, it complements any modern décor. Halo's intuitive touch control and durable, contemporary design make it the ideal choice for modern task lighting.

Bourgie xmas limited edition

Kartell > Table lamp

Ferruccio Laviani’s Bourgie lamp is waiting to brighten up your Christmas with its soft, warm aura. A touch of light is all it takes to create a magical atmosphere. After the new colours launched to celebrate the product’s twentieth anniversary at Salone del Mobile, Bourgie now comes in a XMAS limited edition in four new colours. Bordeaux, grey, bronze and matte champagne have been specially chosen to turn Bourgie into an exclusive gift to place under the tree.

Bourgie metal gold

Kartell > Table lamp

Bourgie unites classicism, wealth and tradition with technological innovation. The baroque-style base consists of three decorated elements that interlock, while the large shade is created with a pleated effect which creates a multitude of reflections when lit. Thanks to a special system used to hang the shade, three different heights can be obtained, altering them to suit personal preference, depending on the use to be made of the lamp: 68, 73 and 78 centimetres.

Bourgie

Kartell > Table lamp

Bourgie unites classicism, wealth and tradition with technological innovation. The baroque-style base consists of three decorated elements that interlock, while the large shade is created with a pleated effect which creates a multitude of reflections when lit. Thanks to a special system used to hang the shade, three different heights can be obtained, altering them to suit personal preference, depending on the use to be made of the lamp: 68, 73 and 78 centimetres.

Planet

Kartell > Table lamp

A family of lamps: suspended, for a coffee table and with a metal structure, and the most recent floor version of the lamp is available in two heights: 130 and 160 cm. The distinctive trait is the shape of the slightly elliptical transparent diffuser, which is characterised by a multi-faceted surface, both inside and out, which creates a rich tapestry of reflections.

Toy

Kartell > Table lamp

The iconic bear of Moschino, re-launched by the designer, becomes a table lamp for Kartell that interprets the playful, irreverent and colourful style that the two brands have in common.

Colette ATD6

&tradition > Table lamp

Named after the famed and pioneering French author known simply as ‘Colette’, &Tradition’s new table lamp has an avant-garde aesthetic. Showcasing a tactile shade and base, this dimmable lamp is elegant, fresh and playful.

Bilboquet

Flos > Table lamp

Table lamp with adjustable head. Integrated LED bulb and cut-off providing direct lighting . Body made of a special pigmented polycarbonate deriving from a by-product of paper production rather than from petroleum. Adjustability through steel sphere treated with protective layer deposited in PVD. Useful length of the cable 2 mt. The cable can be adjusted and locked in place through a special slit in the base of the lamp. The product has been designed according to the ISCC standards and it is assembled with total absence of glued components so that it can be completely separated for future recyclability.

Snoopy

Flos > Table lamp

Table lamp giving direct light with enamelled metal reflector and white Carrara's marble base. It was designed by Achille e Pier Giacomo Castiglioni in 1967.

Gatto

Flos > Table lamp

Table lamp providing diffused light. White powder coated internal steel structure sprayed with a unique "cocoon" resin to create the diffuser which is then protected by a transparent sprayed on finish. On the cable there is the electronic  dimmer which allows the regulation of light brightness.