READING LAMP by Cinna
Key details
| SKU | 2816 |
|---|---|
| Brand | Cinna |
| Category | Floor lamp |
Specifications
| SKU | 2816 |
|---|---|
| Designer | Patrick Zulauf |
| Brand | Cinna |
| Category | Floor lamp |
More Floor lamp by Cinna
Sandra Medium settee with lumbar cushions
Cinna > Accessories
STRUCTURE Entirely made of foam with 2 different densities: polyether 21 kg/m3 - 3.2 kPa and polyether 28 kg/m3 - 4.8 kPa. COMFORT The seat and back are made of high-resilience Bultex polyurethane foam (36 kg/m3 - 2.8 kPa and 38 kg/m3 - 2.8 kPa). Entirely clad in ultra-soft polyurethane foam (45 kg/m3 - 1.8 kPa). Each item (except the footstool and armchair) comes with a lumbar cushion. MAKING-UP Cover clad with 480 g/m² polyester quilting, single-needle stitching. Covers may be removed by a professional.
Sandra Large settee with lumbar cushions
Cinna > Accessories
STRUCTURE Entirely made of foam with 2 different densities: polyether 21 kg/m3 - 3.2 kPa and polyether 28 kg/m3 - 4.8 kPa. COMFORT The seat and back are made of high-resilience Bultex polyurethane foam (36 kg/m3 - 2.8 kPa and 38 kg/m3 - 2.8 kPa). Entirely clad in ultra-soft polyurethane foam (45 kg/m3 - 1.8 kPa). Each item (except the footstool and armchair) comes with a lumbar cushion. MAKING-UP Cover clad with 480 g/m² polyester quilting, single-needle stitching. Covers may be removed by a professional.
Prado 2 Medium settee
Cinna > Sofa
STRUCTURE AND COMFORT The structure is composed of three-layer, crossed, webbed panels of chipboard clad with a polyether foam with a density of 40 kg/m³. The seat is made of high-resilience Bultex polyurethane foam, with densities of 36 kg/m³ and 38 kg/m³, and a resistance of 2.8 kPa. The back cushion is made of injected foam with a density of 60 kg/m³, moulded onto a metal insert equipped with elastic webbing with a new compartmented goose feather filling, composed of 10% down and 90% feathers, as well as a layer of 110 g/m² polyester quilting. Anti-slip system. The lumbar cushion is filled with new goose feathers, with a ratio of 10% down and 90% feathers. The optional armrest cushion is made of high-resilience Bultex polyurethane foam with a density of 35 kg/m³ and clad with 200 g/m² polyester quilting. MAKING-UP The quilted version features a quilted cover, sewn crosswise, without any seams on the seat. A single seam runs through the centre, but it's located on the settee’s structure. In this version, the cushion cannot be turned over to transform it into a bed, and the base is now a single piece. The setttee’s base is identical to that of the original Prado. Leather is not suitable due to the quilting being too fragmented. The back benefits from an anti-slip system and remains identical to that of the Prado. As with the latter, some fabric options will be limited for the bases.
Prado 2 Large settee depth 125
Cinna > Sofa
STRUCTURE AND COMFORT The structure is composed of three-layer, crossed, webbed panels of chipboard clad with a polyether foam with a density of 40 kg/m³. The seat is made of high-resilience Bultex polyurethane foam, with densities of 36 kg/m³ and 38 kg/m³, and a resistance of 2.8 kPa. The back cushion is made of injected foam with a density of 60 kg/m³, moulded onto a metal insert equipped with elastic webbing with a new compartmented goose feather filling, composed of 10% down and 90% feathers, as well as a layer of 110 g/m² polyester quilting. Anti-slip system. The lumbar cushion is filled with new goose feathers, with a ratio of 10% down and 90% feathers. The optional armrest cushion is made of high-resilience Bultex polyurethane foam with a density of 35 kg/m³ and clad with 200 g/m² polyester quilting. MAKING-UP The quilted version features a quilted cover, sewn crosswise, without any seams on the seat. A single seam runs through the centre, but it's located on the settee’s structure. In this version, the cushion cannot be turned over to transform it into a bed, and the base is now a single piece. The setttee’s base is identical to that of the original Prado. Leather is not suitable due to the quilting being too fragmented. The back benefits from an anti-slip system and remains identical to that of the Prado. As with the latter, some fabric options will be limited for the bases.
Prado Large settee depth 120
Cinna > Sofa
CONSTRUCTION & COMFORT Structure in panels of chipboard, webbed and clad in foam 50 kg/m³ and 110 g/m² quilting; seat cushion in polyurethane foam 36 kg/m³ and 110 g/m² quilting. Back cushion in injected foam 60 kg/m³ moulded onto a metal insert, equipped with elastic webbing and with a compartmented goose feather-filled comfort layer (10 % down / 90 % feathers) with 110 g/m² quilting. Anti-slip system. Lumbar cushion filled with new goose feathers (10 % down / 90 % feathers). Optional armrest cushion in polyurethane foam 35 kg/m³ and 200 g/m² quilting. The reverse of the seat cushion is covered in mattress ticking: simply turn the cushion and use the optional 100 % white cotton fitted sheet to create a comfortable sleep area (width 100 or 120 cm). With the exception of the base in leather or microfibre, all elements of the model PRADO have removable covers. The Oda pedestal table (designed to slide above the seat cushion thanks to their cantilevered tops) is designed as the perfect complement to this settee, making it possible to create corner compositions, for example, or to add occasional tables on which one can place one's personal effects.
Prado Medium settee - d 120
Cinna > Sofa
CONSTRUCTION & COMFORT Structure in panels of chipboard, webbed and clad in foam 50 kg/m³ and 110 g/m² quilting; seat cushion in polyurethane foam 36 kg/m³ and 110 g/m² quilting. Back cushion in injected foam 60 kg/m³ moulded onto a metal insert, equipped with elastic webbing and with a compartmented goose feather-filled comfort layer (10 % down / 90 % feathers) with 110 g/m² quilting. Anti-slip system. Lumbar cushion filled with new goose feathers (10 % down / 90 % feathers). Optional armrest cushion in polyurethane foam 35 kg/m³ and 200 g/m² quilting. The reverse of the seat cushion is covered in mattress ticking: simply turn the cushion and use the optional 100 % white cotton fitted sheet to create a comfortable sleep area (width 100 or 120 cm). With the exception of the base in leather or microfibre, all elements of the model PRADO have removable covers. The Oda pedestal table (designed to slide above the seat cushion thanks to their cantilevered tops) is designed as the perfect complement to this settee, making it possible to create corner compositions, for example, or to add occasional tables on which one can place one's personal effects.
Prado Medium settee - d 100
Cinna > Sofa
CONSTRUCTION & COMFORT Structure in panels of chipboard, webbed and clad in foam 50 kg/m³ and 110 g/m² quilting; seat cushion in polyurethane foam 36 kg/m³ and 110 g/m² quilting. Back cushion in injected foam 60 kg/m³ moulded onto a metal insert, equipped with elastic webbing and with a compartmented goose feather-filled comfort layer (10 % down / 90 % feathers) with 110 g/m² quilting. Anti-slip system. Lumbar cushion filled with new goose feathers (10 % down / 90 % feathers). Optional armrest cushion in polyurethane foam 35 kg/m³ and 200 g/m² quilting. The reverse of the seat cushion is covered in mattress ticking: simply turn the cushion and use the optional 100 % white cotton fitted sheet to create a comfortable sleep area (width 100 or 120 cm). With the exception of the base in leather or microfibre, all elements of the model PRADO have removable covers. The Oda pedestal table (designed to slide above the seat cushion thanks to their cantilevered tops) is designed as the perfect complement to this settee, making it possible to create corner compositions, for example, or to add occasional tables on which one can place one's personal effects.
Prado Square settee
Cinna > Sofa
CONSTRUCTION & COMFORT Structure in panels of chipboard, webbed and clad in foam 50 kg/m³ and 110 g/m² quilting; seat cushion in polyurethane foam 36 kg/m³ and 110 g/m² quilting. Back cushion in injected foam 60 kg/m³ moulded onto a metal insert, equipped with elastic webbing and with a compartmented goose feather-filled comfort layer (10 % down / 90 % feathers) with 110 g/m² quilting. Anti-slip system. Lumbar cushion filled with new goose feathers (10 % down / 90 % feathers). Optional armrest cushion in polyurethane foam 35 kg/m³ and 200 g/m² quilting. The reverse of the seat cushion is covered in mattress ticking: simply turn the cushion and use the optional 100 % white cotton fitted sheet to create a comfortable sleep area (width 100 or 120 cm). With the exception of the base in leather or microfibre, all elements of the model PRADO have removable covers. The Oda pedestal table (designed to slide above the seat cushion thanks to their cantilevered tops) is designed as the perfect complement to this settee, making it possible to create corner compositions, for example, or to add occasional tables on which one can place one's personal effects.
Prado cadence Large settee depth 120
Cinna > Sofa
CONFIGURATION OF THE MODEL PRADO ÉDITION SPÉCIALE : - Base part A (upper section) : mattress upholstered in the exclusive fabric CADENCE Nature. A new, elegant and resistant covering material, elevated by dynamic lines and soft, natural shades. A fabric which affirms a strong, contemporary visual identity, exclusive to this version of PRADO. Composition : 58% polyester/42% polyacrylic – resistance to wear : 16,000 Martindale revolutions - lightfastness : 6–7 – tear test : 130 N / 290 N - weight : 1 194 g/ml. - Base part B (lower section), back cushions and bolsters exclusively upholstered in SCAN beige. A natural, soothing tone, ideal for a soft, contemporary ambiance.
Kobold soft Chaise longue with armrest
Cinna > Chair
STRUCTURE Seat frame in spruce plywood panels, clad in ash veneered MDF panel. Armrests and back structure in ash veneered MDF, clad in Bultex foam (48kg/m3 – 7.1kPa) and 110g/m² polyester quilting. Base in stained ash and for hidden areas in black lacquered beech. COMFORT The seat is composed of pocket springs and Bultex high resilience polyurethane foam (38 kg/m3 - 3.6 kPa): for the part integrated into the seat frames. The seat cushion is made of Bultex foam (38 kg/m3 – 3.6 kPa) with goose feathers and clad in 110 g/m² polyester quilting. Parallel bedding of 200x90 supplied with a mattress protector. The comfort of the backrests is achieved by a set of backrest cushions and kidney wedges, all in goose feathers. The comfort of the backs is achieved by a set of back cushions and bolsters in goose feathers. CONSTRUCTION Two satin stitches on the seat cushion. Cover may be removable by a professional. When the model KOBOLD SOFT is made up in ALPA, the bourdon point stitching on the seat is replaced by straight stitch.
Kobold classic 1-armed settee with short unit
Cinna > Sofa
STRUCTURE Seat frame in spruce plywood panels, clad in ash veneered MDF panel. Armrests and back structure in ash veneered MDF, clad in Bultex foam (48kg/m3 – 7.1kPa) and 110g/m² polyester quilting. Base in stained ash and for hidden areas in black lacquered beech. COMFORT The seat is composed of pocket springs and Bultex high resilience polyurethane foam (38 kg/m3 - 3.6 kPa): for the part integrated into the seat frames. The seat cushion is made of Bultex foam (36 kg/m3 – 2.8 kPa + 38kg/m3 – 2.8 kPa) and clad in 110 g/m² polyester quilting. Parallel bedding of 200x90. The comfort of the backs is achieved by a set of back cushions in Bultex foam (38kg/m3 – 2.8 kPa) + goose feathers and bolsters in goose feathers. CONSTRUCTION Two satin stitches on the seat cushion. Double piping on the seat and back cushions, simple piping on the lumbar cushions. Cover may be removable by a professional. When the model KOBOLD CLASSIC is made up in ALCANTARA, ALPA, DIVA, SOFT TOUCH, the bourdon point stitching on the seat is replaced by straight stitch.
Ottoman Large settee
Cinna > Sofa
CONSTRUCTION Base and external section in polyether foam 28 kg/m³ - 4.8 kPa. Armchairs are available in fixed or rotating versions (with base in 6 mm thick steel, finished in Epoxy black lacquer). COMFORT Enveloping 'bucket seat'-style seat and back in moulded polyurethane foam 35 kg/m³ - 3.2 kPa, with comfort layer in high resilience polyurethane Bultex foam 38 kg/m³ - 3.6 kPa. MAKING-UP Cover is removable (by a professional) and is held in place by lacings at the junction of the seat and back, and by gripper strips on the underside. Cover quilted with polyether foam on the seat/back section, and with 100g/m² polyester quilting on the vertical exterior. Important : the swivelling armchair does not have removable covers.
Ottoman Small settee
Cinna > Sofa
CONSTRUCTION Base and external section in polyether foam 28 kg/m³ - 4.8 kPa. Armchairs are available in fixed or rotating versions (with base in 6 mm thick steel, finished in Epoxy black lacquer). COMFORT Enveloping 'bucket seat'-style seat and back in moulded polyurethane foam 35 kg/m³ - 3.2 kPa, with comfort layer in high resilience polyurethane Bultex foam 38 kg/m³ - 3.6 kPa. MAKING-UP Cover is removable (by a professional) and is held in place by lacings at the junction of the seat and back, and by gripper strips on the underside. Cover quilted with polyether foam on the seat/back section, and with 100g/m² polyester quilting on the vertical exterior. Important : the swivelling armchair does not have removable covers.
Saparella Settee
Cinna > Sofa
CONSTRUCTION Base and sides in polyether foam 28kg/m3 - 4.8kPa. The three items sit on a ventilated fabric base. COMFORT Seat and back made from high resilience polyurethane Bultex foam (36kg/m3 - 3.2 kPa), clad in a comfort layer of high resilience polyurethane Bultex foam (38 kg/m3 - 3.6 kPa). MAKING-UP Cover quilted with 200g/m² polyester. 5mm baguette stitch. Removable covers. Important: no baguette stitch when model is upholstered in BYRAM, ELLA, FESTA, LHUIS or TONA.
G10 Settee upholstered arms
Cinna > Sofa
STRUCTURE Back composed of plywood panels clad with polyurethane foam and 110 g/m² polyester quilting. Mechanically-soldered base in Epoxy black lacquer finish. Armrests in moulded beech plywood with stained ash veneer. COMFORT Suspension of seat via elastic webbing. The seat and back are made of high resilience polyurethane Bultex foam (38 kg/m3 - 3,6 kPa and 38 kg/m3 - 2,8 kPa). 110 g/m² polyester quilting.
G10 Settee wood arms
Cinna > Sofa
STRUCTURE Back composed of plywood panels clad with polyurethane foam and 110 g/m² polyester quilting. Mechanically-soldered base in Epoxy black lacquer finish. Armrests in moulded beech plywood with stained ash veneer. COMFORT Suspension of seat via elastic webbing. The seat and back are made of high resilience polyurethane Bultex foam (38 kg/m3 - 3,6 kPa and 38 kg/m3 - 2,8 kPa). 110 g/m² polyester quilting.
Pukka Medium settee
Cinna > Sofa
CONSTRUCTION : Foams of various densities and a base of high resilience polyurethane foam (48 kg/m3 – 7.1 kPa). COMFORT : The back is composed of high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa) clad in ultra-flexible polyurethane foam (50 kg/m3 – 1.8 kPa). The seat is composed of high resilience polyurethane Bultex foam (38 kg/m3 – 3.6 kPa et 38 kg/m3 – 2.8 kPa) clad in ultra-flexible polyurethane foam (50 kg/m3 – 1.8 kPa) MAKING-UP : Fabrics with elastic properties must be selected. Cover may be removed by a professional.
Paipaï Large settee
Cinna > Sofa
CONSTRUCTION Settee and love seat: structure of seat and back in mechanically-soldered steel. Structure of armrest in technical fabric for flexibility. A sheet of steel forms the joint between seat and armrest. The screws are visible and make a nice aesthetic touch. Footstool : structure of seat in panels of multi-ply. Structure clad in polyether foam and high resilience polyurethane Bultex foam. The entire structure is clad in 100 g/m² and 200g/m² polyester quilting. Legs in matt black steel Ø 18 mm. COMFORT Settee and love seat : suspension of seat and back via elastic webbing. Structure of seat in high resilience Bultex foam (38 kg/m3 - 3.6 kPa), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and 200 g/m² polyester quilting. Back in high resilience Bultex foam (38 kg/m3 - 3.6 kPa,), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and polyester quilting (200 g/m² and 100 g/m²). Lumbar cushion (660 x 300mm) filled with goose feathers. Footstool : structure of seat in high resilience Bultex foam (38 kg/m3 - 3.6 kPa), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and 200 g/m² polyester quilting. MAKING-UP Structure of back: 5 mm bourrelet stitch. Removable covers in both fabric and leather. Covering material recommendations: Harald, Gandino, Match, Canvas, leathers.
Paipaï Medium settee
Cinna > Sofa
CONSTRUCTION Settee and love seat: structure of seat and back in mechanically-soldered steel. Structure of armrest in technical fabric for flexibility. A sheet of steel forms the joint between seat and armrest. The screws are visible and make a nice aesthetic touch. Footstool : structure of seat in panels of multi-ply. Structure clad in polyether foam and high resilience polyurethane Bultex foam. The entire structure is clad in 100 g/m² and 200g/m² polyester quilting. Legs in matt black steel Ø 18 mm. COMFORT Settee and love seat : suspension of seat and back via elastic webbing. Structure of seat in high resilience Bultex foam (38 kg/m3 - 3.6 kPa), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and 200 g/m² polyester quilting. Back in high resilience Bultex foam (38 kg/m3 - 3.6 kPa,), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and polyester quilting (200 g/m² and 100 g/m²). Lumbar cushion (660 x 300mm) filled with goose feathers. Footstool : structure of seat in high resilience Bultex foam (38 kg/m3 - 3.6 kPa), clad in ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa) and 200 g/m² polyester quilting. MAKING-UP Structure of back: 5 mm bourrelet stitch. Removable covers in both fabric and leather. Covering material recommendations: Harald, Gandino, Match, Canvas, leathers.
Exclusif Small settee with armrest b
Cinna > Sofa
CONSTRUCTION & COMFORT The structure is mainly in multi-ply, thus making a significant reduction in terms of weight. For optimum comfort the seat cushion is supported by a webbed suspension. IMPORTANT: POSSIBILITY OF 2 DIFFERENT FOOT HEIGHTS: 30 mm OR 65 mm. PLEASE SPECIFY YOUR CHOICE WHEN PLACING YOUR ORDER. Feather-filled seat and back cushions (10% feathers/90% down), compressibility H 88 mm with compartmented liner on the seat, both with a core of high resilience polyurethane Bultex foam (30 kg/m³ - 1.8 kPa). Flat edges of seat cushions are quilted with a layer of polyester (200 g/m²). Seat cushions are anchored to the frame by a combination of zip fastenings. 57 x 57 cm cushion filled with 100% duck feathers. For a firmer level of comfort, seat cushions may be made entirely from high resilience polyurethane Bultex foam (dominant 2.6 kPa) : please specify when placing order. Headrest comprising a base in chromed steel wire (Ø 10 mm) clad in high resilience polyurethane Bultex foam (dominant 38 kg/m³ - 3.6 kPa) and 300 g/m² polyester quilting. MAKING-UP Removable cushion covers. Removable frame cover (NB except microfibres or leather), although is necessary to remove the armrests in order to do so - this can be done without difficulty. Bicolour interpretations may be created by specifying a different colour/fabric for the back and lumbar cushions. In the case of the large settees (with and without arms), large 1-arm settees and large asymmetrical settees, each ite
Exclusif Large asymmetrical settee
Cinna > Sofa
CONSTRUCTION & COMFORT The structure is mainly in multi-ply, thus making a significant reduction in terms of weight. For optimum comfort the seat cushion is supported by a webbed suspension. IMPORTANT: POSSIBILITY OF 2 DIFFERENT FOOT HEIGHTS: 30 mm OR 65 mm. PLEASE SPECIFY YOUR CHOICE WHEN PLACING YOUR ORDER. Feather-filled seat and back cushions (10% feathers/90% down), compressibility H 88 mm with compartmented liner on the seat, both with a core of high resilience polyurethane Bultex foam (30 kg/m³ - 1.8 kPa). Flat edges of seat cushions are quilted with a layer of polyester (200 g/m²). Seat cushions are anchored to the frame by a combination of zip fastenings. 57 x 57 cm cushion filled with 100% duck feathers. For a firmer level of comfort, seat cushions may be made entirely from high resilience polyurethane Bultex foam (dominant 2.6 kPa) : please specify when placing order. Headrest comprising a base in chromed steel wire (Ø 10 mm) clad in high resilience polyurethane Bultex foam (dominant 38 kg/m³ - 3.6 kPa) and 300 g/m² polyester quilting. MAKING-UP Removable cushion covers. Removable frame cover (NB except microfibres or leather), although is necessary to remove the armrests in order to do so - this can be done without difficulty. Bicolour interpretations may be created by specifying a different colour/fabric for the back and lumbar cushions. In the case of the large settees (with and without arms), large 1-arm settees and large asymmetrical settees, each ite
Exclusif Small asymmetrical settee
Cinna > Sofa
CONSTRUCTION & COMFORT The structure is mainly in multi-ply, thus making a significant reduction in terms of weight. For optimum comfort the seat cushion is supported by a webbed suspension. IMPORTANT: POSSIBILITY OF 2 DIFFERENT FOOT HEIGHTS: 30 mm OR 65 mm. PLEASE SPECIFY YOUR CHOICE WHEN PLACING YOUR ORDER. Feather-filled seat and back cushions (10% feathers/90% down), compressibility H 88 mm with compartmented liner on the seat, both with a core of high resilience polyurethane Bultex foam (30 kg/m³ - 1.8 kPa). Flat edges of seat cushions are quilted with a layer of polyester (200 g/m²). Seat cushions are anchored to the frame by a combination of zip fastenings. 57 x 57 cm cushion filled with 100% duck feathers. For a firmer level of comfort, seat cushions may be made entirely from high resilience polyurethane Bultex foam (dominant 2.6 kPa) : please specify when placing order. Headrest comprising a base in chromed steel wire (Ø 10 mm) clad in high resilience polyurethane Bultex foam (dominant 38 kg/m³ - 3.6 kPa) and 300 g/m² polyester quilting. MAKING-UP Removable cushion covers. Removable frame cover (NB except microfibres or leather), although is necessary to remove the armrests in order to do so - this can be done without difficulty. Bicolour interpretations may be created by specifying a different colour/fabric for the back and lumbar cushions. In the case of the large settees (with and without arms), large 1-arm settees and large asymmetrical settees, each ite
Uncover Large settee version b – stretch fabrics
Cinna > Sofa
CONSTRUCTION An assembly of varying densities of high resilience polyurethane Bultex foam and polyether foam (base). Frame of footstool in 3-layer particleboard, with black polypropylene gliders. COMFORT Structure in high resilience Bultex foam (36kg/m3 - 2.7 kPa, 38 kg/m3 - 3.6 kPa). Base in polyether foam (28 kg/m3 - 4.8kPa, 34 kg/m3 - 6.4 kPa). Core of settee armrests in moulded foam, density 42 kg/m3 – 48 kPa. The entire structure is clad in 110 g/m² polyester quilting. Settees are equipped with a feather-filled cushion (40 cm x 40 cm) as standard, covered in the same covering material/colour as the main cover, but without the stitched motif. This cushion is also priced separately should more be required. MAKING-UP Only stretch fabrics may be used. Fully removable covers. IMPORTANT : When the model UNCOVER (except armchair) is upholstered in ARDA, CAPA, MILLA or MOSAÏC 2 there is a transversal seam on the rear of the back.
Uncover Medium settee version b – stretch fabrics
Cinna > Sofa
CONSTRUCTION An assembly of varying densities of high resilience polyurethane Bultex foam and polyether foam (base). Frame of footstool in 3-layer particleboard, with black polypropylene gliders. COMFORT Structure in high resilience Bultex foam (36kg/m3 - 2.7 kPa, 38 kg/m3 - 3.6 kPa). Base in polyether foam (28 kg/m3 - 4.8kPa, 34 kg/m3 - 6.4 kPa). Core of settee armrests in moulded foam, density 42 kg/m3 – 48 kPa. The entire structure is clad in 110 g/m² polyester quilting. Settees are equipped with a feather-filled cushion (40 cm x 40 cm) as standard, covered in the same covering material/colour as the main cover, but without the stitched motif. This cushion is also priced separately should more be required. MAKING-UP Only stretch fabrics may be used. Fully removable covers. IMPORTANT : When the model UNCOVER (except armchair) is upholstered in ARDA, CAPA, MILLA or MOSAÏC 2 there is a transversal seam on the rear of the back.
Uncover Chaise longue
Cinna > Chair
CONSTRUCTION An assembly of varying densities of high resilience polyurethane Bultex foam and polyether foam (base). Frame of footstool in 3-layer particleboard, with black polypropylene gliders. COMFORT Structure in high resilience Bultex foam (36kg/m3 - 2.7 kPa, 38 kg/m3 - 3.6 kPa). Base in polyether foam (28 kg/m3 - 4.8kPa, 34 kg/m3 - 6.4 kPa). Core of settee armrests in moulded foam, density 42 kg/m3 – 48 kPa. The entire structure is clad in 110 g/m² polyester quilting. Settees are equipped with a feather-filled cushion (40 cm x 40 cm) as standard, covered in the same covering material/colour as the main cover, but without the stitched motif. This cushion is also priced separately should more be required. MAKING-UP Only stretch fabrics may be used. Fully removable covers. IMPORTANT : When the model UNCOVER (except armchair) is upholstered in ARDA, CAPA, MILLA or MOSAÏC 2 there is a transversal seam on the rear of the back.
Plumy Large settee
Cinna > Sofa
CONSTRUCTION Structuring base in polyether foam (28kg/m3 - 4.0 kPa). COMFORT Seat and back in high resilience polyurethane Bultex foam (38 kg/m3 - 3.6 kPa). Seat and back cushions : filled with goose feathers (85% feathers /15% down), with compartmented liner. MAKING-UP Fully removable cover, quilted with 200/m² polyester. Reverse of cushions available in 2 versions : in cloth, or upholstered in the main covering material. Choice of 3 colours for the zips (always matched to the cloth backing in the case of the version with cloth backing : matt black, pearl grey or ivory - please specify your choice when placing your order.
Plumy Medium settee
Cinna > Sofa
CONSTRUCTION Structuring base in polyether foam (28kg/m3 - 4.0 kPa). COMFORT Seat and back in high resilience polyurethane Bultex foam (38 kg/m3 - 3.6 kPa). Seat and back cushions : filled with goose feathers (85% feathers /15% down), with compartmented liner. MAKING-UP Fully removable cover, quilted with 200/m² polyester. Reverse of cushions available in 2 versions : in cloth, or upholstered in the main covering material. Choice of 3 colours for the zips (always matched to the cloth backing in the case of the version with cloth backing : matt black, pearl grey or ivory - please specify your choice when placing your order.
Murtoli Settee
Cinna > Sofa
STRUCTURE Structure of seat: mechanically-soldered frame. The invisible screws under the base are grey for the outdoor version and black for the indoor version. Structure of backrest cushion: ABS plate (outdoor) or panel of particleboard (indoor). The back cushions of the indoor and outdoor versions have the same weight. COMFORT Suspension via polypropylene slats reinforced with fibreglass. The seat is composed of high resilience polyurethane Bultex foam (38 kg/m3 – 3.6 kPa and 38 kg/m3 – 2.8 kPa). The back cushion is composed of high resilience polyurethane Bultex foam (42 kg/m3 – 4.8 kPa and 26 kg/m3 – 1.4 kPa) clad in ultra-flexible foam (45 kg/m3 – 1.8 kPa). Its interior is fitted with an anti-slip system. The bolster is made from high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa). COVER Covers quilted with 110 g/m² polyester. Baguette stitching and twin-needle stitching on seat and back cushions ; baguette stitching on bolster. Covers may be removed by a professional, except for a base in leather or microfibre.
Amédée Settee
Cinna > Sofa
CONSTRUCTION structure of seat in 3-layer particleboard ; structure of back in thermoformed ABS. Base in black MDF panels in the case of the settee and fixed armchair, or in 8 mm thick Epoxy black lacquered steel in the case of the rotating armchair. In the case of the footstool, the structure is in 3-layer particleboard. COMFORT elastic webbing and high resilience polyurethane foam (36 kg/m3 - 2.8 kPa) on the seat. High resilience polyurethane foam (26 kg/m3 - 1.4 kPa) on the back. Polyurethane foam (38 kg/m3 - 3.6 kPa) for the footstool. MAKING-UP cover quilted with 110g/m² polyester with, baguette stitch detailing; cover may be removed by a professional. Lumbar and armrest cushions are integral to the cover: they are stitched every 5 cm and quilted with ultra-flexible polyurethane foam (30 kg/m3 - 1.8 kPa).
Grand angle Large settee with broad armrest without lumbar cushion
Cinna > Accessories
CONSTRUCTION Structure of seat: webbed metal frame. Structure of backrest : panels 3-layer plywood with articulated headrest. Armrest composed of panels of plywood. COMFORT Seat composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa) and ultra-flexible foam (45 kg/m3 – 1.8 kPa) with comfort layer of feathers (goose feathers, of which 15% down). Backrest composed of high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa) clad in ultra-flexible foam (45 kg/m3 – 1.8 kPa). Feather-filled back (lumbar) cushion (goose feathers, of which 15% down). MAKING-UP Backrest quilted with stretch fabric to retain pleating on rear of backrest. Cover quilted with 110 g/m² polyester.
Grand angle Large settee with slim armrest without lumbar cushion
Cinna > Accessories
CONSTRUCTION Structure of seat: webbed metal frame. Structure of backrest : panels 3-layer plywood with articulated headrest. Armrest composed of panels of plywood. COMFORT Seat composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa) and ultra-flexible foam (45 kg/m3 – 1.8 kPa) with comfort layer of feathers (goose feathers, of which 15% down). Backrest composed of high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa) clad in ultra-flexible foam (45 kg/m3 – 1.8 kPa). Feather-filled back (lumbar) cushion (goose feathers, of which 15% down). MAKING-UP Backrest quilted with stretch fabric to retain pleating on rear of backrest. Cover quilted with 110 g/m² polyester.
Grand angle Small settee with slim armrest without lumbar cushion
Cinna > Accessories
CONSTRUCTION Structure of seat: webbed metal frame. Structure of backrest : panels 3-layer plywood with articulated headrest. Armrest composed of panels of plywood. COMFORT Seat composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa) and ultra-flexible foam (45 kg/m3 – 1.8 kPa) with comfort layer of feathers (goose feathers, of which 15% down). Backrest composed of high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa) clad in ultra-flexible foam (45 kg/m3 – 1.8 kPa). Feather-filled back (lumbar) cushion (goose feathers, of which 15% down). MAKING-UP Backrest quilted with stretch fabric to retain pleating on rear of backrest. Cover quilted with 110 g/m² polyester.
Telen Module a
Cinna > Curtain
CONSTRUCTION Structure of seat : 3-layer plywood. Structure of back cushion: panel of particleboard. COMFORT The seat is composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa and 38 kg/m3 – 2.8 kPa) clad in 110 g/m² polyester quilting. The back cushion is composed of high resilience polyurethane Bultex foam (42 kg/m3 – 4.8 kPa and 26 kg/m3 – 1.4 kPa) clad in ultra-flexible polyurethane foam (45 kg/m3 – 1.8 kPa). Anti-slip system on lower face. Clad in 110 g/m² polyester quilting. MAKING-UP Twin-needle stitching on seat ; baguette and twin-needle stitching on the back cushion. Covers may be removed by a professional.
Telen Module b2
Cinna > Curtain
CONSTRUCTION Structure of seat : 3-layer plywood. Structure of back cushion: panel of particleboard. COMFORT The seat is composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa and 38 kg/m3 – 2.8 kPa) clad in 110 g/m² polyester quilting. The back cushion is composed of high resilience polyurethane Bultex foam (42 kg/m3 – 4.8 kPa and 26 kg/m3 – 1.4 kPa) clad in ultra-flexible polyurethane foam (45 kg/m3 – 1.8 kPa). Anti-slip system on lower face. Clad in 110 g/m² polyester quilting. MAKING-UP Twin-needle stitching on seat ; baguette and twin-needle stitching on the back cushion. Covers may be removed by a professional.
Telen Module b1
Cinna > Curtain
CONSTRUCTION Structure of seat : 3-layer plywood. Structure of back cushion: panel of particleboard. COMFORT The seat is composed of high resilience polyurethane Bultex foam (36 kg/m3 – 2.8 kPa and 38 kg/m3 – 2.8 kPa) clad in 110 g/m² polyester quilting. The back cushion is composed of high resilience polyurethane Bultex foam (42 kg/m3 – 4.8 kPa and 26 kg/m3 – 1.4 kPa) clad in ultra-flexible polyurethane foam (45 kg/m3 – 1.8 kPa). Anti-slip system on lower face. Clad in 110 g/m² polyester quilting. MAKING-UP Twin-needle stitching on seat ; baguette and twin-needle stitching on the back cushion. Covers may be removed by a professional.
Ipanema Curved settee
Cinna > Sofa
CONSTRUCTION Structure of armrest and backrest in mechanically-soldered tubular steel clad in Bultex foam and 110g/m² polyester quilting. Structure of seat: majority multi-ply, which makes each piece significantly lighter, clad in polyether foam and 110g/m² polyester quilting. Matt black round legs H 30 mm Ø 50mm, concealed beneath the structure. COMFORT Suspension of seat via elastic webbing. Seat cushion in high resilience Bultex foam (36kg/m3 - 2.8 kPa, 42kg/m3 – 4.8 kPa) and 110g/m² polyester quilting. Structure of seat clad in 110g/m² polyester quilting. Comfort of backrest provided by a combination of feather-filled cushions: large cushions filled with new duck feathers (10% down / 90% feathers); small cushions filled with new duck feathers (15% feathers).
Cover Medium settee
Cinna > Sofa
CONSTRUCTION Structure of settees in high resilience Bultex foam ; footstool has a wooden carcase made from 3-layer particleboard. Black polypropylene gliders. COMFORT High resilience Bultex foam (36 kg/m3 - 2.7 kPa, 38 kg/m3 - 3.6 kPa). Polyether foam (28 kg/m3 - 4.8 kPa, 34 kg/m3 - 6.4 kPa). Core of settee armrests in moulded foam. Settees are systematically supplied with a 40 x 40 cm feather-filled cushion, upholstered in the same covering material as the main cover. This cushion is also priced separately to enable additional cushions to be ordered ; additional cushions may be made up in any fabric or leather from the collection. MAKING-UP The medium and large Cover settees are composed of a base and a 'cover', which is draped over the base and is held in position by toggles at the rear of the seat. These items may be bi-colour and/or bi-material. Base is covered in fabric (to order) + base cloth. The stitching of the cover follows the outline of the back and armrests, creating a geometric effect which appears completely random. The stitching serves to 'quilt' the covering fabric used, whilst the upper and lower fabrics act to sandwich 300 g/m2 polyester quilting. Progressive V-shaped motifs (denser towards the middle of the seat and less so at the edges). The cover may be removed easily and may be dry cleaned. Footstool : baguette stitching around the edges. Cover is quilted with 110 g/m2 polyester.
Okura Medium settee low back
Cinna > Sofa
CONSTRUCTION Seat in panels of 3-layer particleboard, cut and clad in polyether foam and 110 g/m2 polyester quilting. COMFORT Webbed suspension on seat. Back consists of a mechanically-soldered steel structure clad in injected polyurethane foam and 110 g/m2 polyester quilting. Seat cushion in high resilience polyurethane Bultex foam (36kg/m3 - 2.8kPa) and 110 g/m2 polyester quilting. Compartmented back cushion filled with new goose feathers (10% down / 90% feathers). High back cushion with structure in mechanically-soldered steel clad in high resilience polyurethane Bultex 26kg/m3 - 1.4kPa and 110g/m2 polyester quilting.
Recently Viewed Products
GAMMA RECESSED - LED adjustable reading lamp
LedsC4 > Floor lamp
This modern wall sconce features a sleek, brushed metal design that seamlessly integrates into any contemporary bedroom setting. Its adjustable light direction allows for personalized illumination, making it perfect for reading or ambient lighting. Ideal for those seeking a refined yet functional accent in their interior design.
Gift Card — Vertigo Bird
Vertigo Bird > Accessories
Give the gift of light with a Vertigo Bird Gift Card. Perfect for design lovers, it lets them choose from our unique lighting creations to brighten any space with style and elegance.
Slim too — Vertigo Bird
Vertigo Bird > Accessories
Bevk Perović arhitekti Once again, the simplicity is the main theme of Slim too lamps. The direct, raw quality of 2 different aluminium profiles housing LED light source, as well as electronics, creates a light that is minimal, discrete and ‘anonymous’, and at the same time very ‘present’ in space
CVT Transmission Drain & Refill | Roda
Roda srl > Accessories
Roda offers a hassle-free CVT Transmission Drain and Refill - we come to you, do the work, and return your vehicle. Premium service at your doorstep. Book now!
Diagnose Fluid Leak | Roda
Roda srl > Accessories
A fluid leak is one of the clearest signs that your vehicle needs attention — but not all leaks mean the same thing.
Tire Plug in Washington, DC | Roda
Roda srl > Accessories
If you have a tire leak, a tire plug can help get your car back on the road. Roda can plug your tire and get you moving again.
VicStrip Spacer Kit
Vicoustic > Accessories
Enhanced acoustic strip panel VicStrip Spacer Kit is an acoustic kit that improves the innovative slat panel VicStrip by using the frame structure of a VicSpacer XXL with an air gap and an additional layer of PET to enhance its acoustic performance engineered for demanding rooms, such as home cinemas and hi-fi listenin
ARTIZE | Basin Mixer | KAVALIER-J
Artize > Washbasin
The sculpted beauty of Kavalier, with its slim and clean lines, never fails to impress. Its oval design is perfectly offset by a futuristic joystick lever. Explore through our range of faucets, bathtubs, sinks, showers & accessories to make your bathr
Environmental Certification - ISO 14001
Servetto > Accessories
When we think of the environment, we think of its preservation. We think about how to live in it with as little impact as possible. We think about not consuming all the resources, but rather about looking for new ones. And we think about pollution. In the popular imagination, pollution is associated with plastic. And […]
bett mit designpreis
Stadtnomaden > Accessories
Die Marke Stadtnomaden bietet eine Auswahl innovativer Designmöbel passend zum urbanen Lebensgefühl.
Portes de placard Éventail
Belull > Door
Les portes de placard Éventail sont composées de barres en carbone, serties dans un écrin de chêne massif, disposées en quinconces ou alignées. Grâce au carbone, ces portes coulissantes, montées sur rail, sont extrêmement légères et vous autorisent à fermer des espaces de grande hauteur, insoupçonnée jusque-là. Télécharger la fiche produit FR Télécharger la fiche produit EN Les portes de placard Éventail sont composées de barres en carbone, serties dans un écrin de chêne massif, disposées en quinconces ou alignées. Grâce au carbone, ces portes coulissantes, montées sur rail, sont extrêmement légères et vous autorisent à fermer des espaces de grande hauteur, insoupçonnée jusque-là. Modèle présenté : dimensions L. 250 x l. 50 cm – finition chêne massif et carbone.
Table Pilotis Claouey Milan
Belull > Table
Collection Pilotis - Claouey est une table à manger aux formes élémentaires dessinée par Emmanuel Gallina où le piètement cylindrique rappelle les célèbres habitations sur l’eau. Dans sa version marbre de Carrare ou marbre Sahara, la finition carbone donne un aspect cuir venant ainsi équilibrer avec la « minéralité » de son plateau. Pour la version avec plateau en noyer massif, le bois amène toute sa chaleur et son élégance à ce design inspiré. Modèle présenté : Finition plateau marbre et piétement carbone. Dimensions D. 140 x H. 75 cm. Plateau chêne. Télécharger la fiche produit Collection Pilotis – Claouey est une table à manger aux formes élémentaires dessinée par Emmanuel Gallina où le piètement cylindrique rappelle les célèbres habitations sur l’eau. Dans sa version marbre de Carrare ou marbre Sahara, la finition carbone donne un aspect cuir venant ainsi équilibrer avec la « minéralité » de son plateau. Pour la version avec plateau en noyer massif, le bois amène toute sa chaleur et son élégance à ce design inspiré. Modèle présenté : Finition plateau marbre et piétement carbone. Dimensions D. 140 x H. 75 cm. Plateau chêne.
Bureau d’architecte Gustave chêne
Belull > Desk
Collection Leaf - Le bureau d’architecte Gustave est tout en légèreté, sa structure à la fois technique et sophistiquée évoque celle des architectures métalliques de l’ingénieur Eiffel. Le piétement, réalisé entièrement en tubes de carbone, associé à la finesse du plateau mixé entre carbone et chêne, rend ce bureau incroyablement aérien. Dimensions : L. 180 cm, l. 80 cm, H. 76 cm Télécharger la fiche produit Collection Leaf – Le bureau d’architecte Gustave est tout en légèreté, sa structure à la fois technique et sophistiquée évoque celle des architectures métalliques de l’ingénieur Eiffel. Le piétement, réalisé entièrement en tubes de carbone, associé à la finesse du plateau mixé entre carbone et chêne, rend ce bureau incroyablement aérien. L’entretien des pièces en carbone nécessite l’utilisation des chiffons doux, sans peluche, et vous pouvez appliquer du produit à vitre pour dépoussiérer et éliminer les traces de doigts. L’entretien des éléments bois : veuillez ne pas placer directement sur votre meuble des objets chauds, lourds, coupants ou humides, qui peuvent créer des bords ou des points de pression. Les liquides renversés doivent être nettoyés immédiatement. Ne jamais frotter une zone en exerçant une pression. Ne laissez pas le liquide pénétrer dans le bois afin d’éviter les taches. L’entretien quotidien ne nécessite pas beaucoup d’effort. Il suffit de dépoussiérer avec un chiffon doux et sec ou d’essuyer avec un chiffon légèrement humide dans le sens des fibres du bois. Ne pas utiliser de chiffon microfibres, de nettoyeur à vapeur ou de gomme nettoyante, qui contiennent des particules fines. Cela pourrait endommager la surface. Assurez-vous que votre vaisselle (assiettes, tasses…) est toujours polie, sinon elle pourrait laisser des rayures sur la surface de vos meubles. La couche de vernis protège le matériau contre les influences extérieures. Le fond dur et le vernis rendent la table plus robuste. Il est néanmoins recommandé d’essuyer les liquides renversés le plus rapidement possible, sans quoi ils risquent d’attaquer et d’endommager la couche de protection. Au besoin, les surfaces vernies peuvent être nettoyées (sans additifs de blanchiment) avec de l’eau en ajoutant un peu de liquide vaisselle neutre (sans colorant). Ne pas utiliser de détergents, de produits de polissage ou d’agents abrasifs. Séchez ensuite la surface avec un chiffon doux.
Penderie Mélanie
Belull > Furniture accessories
La penderie Mélanie se compose de 2 éléments, un élément haut formé de deux caissons qui viennent accueillir votre linge plié. En sous-face, une solide tringle en carbone vous permet de suspendre au moins une vingtaine de vêtements, manteaux, blousons, robes, pantalons… L’élément bas, quant à lui, peut servir de support à valise et le rayonnage carbone à ranger vos chaussures. Télécharger la fiche produit La penderie Mélanie se compose de 2 éléments, un élément haut formé de deux caissons qui viennent accueillir votre linge plié. En sous-face, une solide tringle en carbone vous permet de suspendre au moins une vingtaine de vêtements, manteaux, blousons, robes, pantalons… L’élément bas, quant à lui, peut servir de support à valise et le rayonnage carbone à ranger vos chaussures. Modèle présenté : dimensions élément haut L. 100 x l. 35 x H. 40 cm. Dimensions élément bas L. 100 x l. 35 x H. 35 cm – finition chêne massif et carbone.
Sito palo
Occhio > Table lamp
Sito palo, LED Pollerleuchte für den Außenbereich mit sphärischem Glas und einseitigem Lichtaustritt. 18W »perfect color« LED für beste Farbwiedergabe. Die Pollerleuchte erreicht die Schutzklasse IP65 und ist somit staubdicht und strahlwasserfest. Dank der optional erhältlichen Bodenverankerung auch auf losem Untergrund montierbar. Anschluss an 230 V (AC) Netzspannung (VOLT light engine). Dimmbar via Phasenabschnittdimmer oder Occhio air.
io sospeso
Occhio > Table lamp
io sospeso, drehbare LED Pendelleuchte, 18/13W (umschaltbar), LED »perfect color« für beste Farbwiedergabe, dimmbar via Phasenabschnittdimmer oder » touchless control « (am head) und Occhio air. Wahlweise als »up« Version für Aufbaumontage mit integriertem Vorschaltgerät oder »flat« Version für Einbaumontage, Vorschaltgerät extern.
COCOON BOWL OVAL
COCOON > Styling
The COCOON BOWL OVAL is a deck-mounted basin from the COCOON Concrete Collection with a softly curved rectangular form. At 590mm in length, it brings a generous proportion to the countertop while keeping a clean, minimal profile. Each piece is cast in concrete and finished by hand, with a pop-up drain in matching material and colour for a seamless surface. The COCOON BOWL OVAL is available in six finishes, from the rich depth of Emerald and Slate to the organic warmth of Terra and Umber, each one bringing its own character to the form.
JP-09.2 KITCHEN MIXER
COCOON > Tap
The JP Kitchen Mixer JP09 is a new launch designed by renowned designer John Pawson, and introduced as part of our latest Kitchen Tapware collection. This spout is available in 213mm and 280mm projections and is crafted from AISI 316L marine-grade stainless steel, offered in Brushed Inox, Dark Grey and JP Brushed Gold finishes. Each option is treated with advanced PVD coating and features NANO anti-fingerprint and anti-bacteria coating for exceptional durability, resistance, and hygiene.
MONO 25 - Rain shower head
COCOON > Shower
Rain shower head 250mm diameter / 8mm thick (ONLY SHOWER HEAD) Brushed AISI316L Stainless Steel
MATERIALS - NATURAL STONE SAMPLES
COCOON > Tap
Natural stone plays a defining role in the character of your bathroom, and our stone samples make it easier to choose the surface that truly reflects your vision. Whether you’???re investing in a bold statement piece or seeking a more subtle, timeless finish, these samples let you see the stone’???s colour, texture, and character up close. Select the individual samples you’???re considering, or order the full set for complete confidence in your choice. The cost of your samples will be credited back to you when you complete a product purchase.
Podium, Mini - Coffee
101 copenhagen > Accessories
The Podium, Mini – Coffee offers a sculptural way to showcase treasured objects or small artworks, evoking the refined presentation of a gallery. Inspired by architectural façade details, the carved relief on two opposing sides interacts with natural light to create shifting patterns of shadow.Finished in a deep, nuanced coffee colour, each piece is hand-painted, giving the surface a textured, unique character with natural variations. The Mini’s compact, square shape makes it perfect as a small side table, a standalone decorative plinth, or in combination with the Maxi and Medio versions for a balanced, multi-height arrangement. Finished on all sides, it can be placed freely in a room or positioned neatly against a wall.
Damp-Room Light ALSF-LED-1260NW-M
A.L.S. > Ceiling lamp
ALSF LED surface mounted luminaire, Multiwatt 5000/3200lm, 4000K, 220-240V
Similar Floor lamp for Commercial Interiors
Ascoli Floor Matt Black
Astro > Floor lamp
This minimalist floor lamp features a sleek, matte black metal design with a cylindrical shade, perfect for modern living rooms or workspaces. Its floor-standing structure and downward light direction provide focused illumination, enhancing any contemporary setting with understated elegance.
Kuro 450 Textured Black
Astro > Floor lamp
The Kuro 450 is our first portable, solar-powered, rechargeable outdoor light. An invaluable addition to any garden, balcony or terrace, this contemporary lantern has three brightness settings and a hidden LED that eliminates glare while focusing light downwards .Its pared-back look blends effortlessly with any decorating style and it can be used both outdoors and indoors thanks to an additional USB charging source.
Martello 240 Plaster
Astro > Floor lamp
This minimalist table lamp features a sleek cylindrical design, perfect for adding ambient lighting to bedrooms, living rooms, or offices. Crafted from matte-finished metal, it embodies a modern aesthetic that complements contemporary interiors.
Kabuki indoor
Kartell > Floor lamp
The Kabuki floor lamp is injection moulded. The technology used makes it possible to create a woven structure similar to lace with a unique perforated surface through which the light is diffused. Available in indoor and outdoor versions.
Cellu Floor Lamp EU Grey
Normann Copenhagen > Floor lamp
Cellu Lamp collection is a modern take on the classic folded lampshade. The elegant lampshade made from PVC for extra durability rests on a powder coated aluminum column and powder coated steel base, both designed with a characteristic, robust expression. The column and base come in complementary color combinations, infusing the design with a contemporary, playful feel.
Ambrosia
Marset > Floor lamp
Ambrosia is essentially a line of light that can be converted into a modular system, capable of extending the illumination it offers to adapt to any space. A design that recovers and revisits the tube light, timeless, and updates it so that its simple structure and diffuse lighting add beauty to any space. This collection expands on its possibilities by proposing a change in the plane of light, from horizontal to vertical.This new style of lamp is available in two versions, both of which are pendant lamps. First there is the Ambrosia V, a 235-cm-high vertical structure consisting of two tubes of light of different lengths. An interrupted line of light, a detail that brings lightness and character to the lamp. Its design allows you to choose the lighting, either towards the wall for indirect light, or towards the main space for direct light. This aesthetic and functional design also works well in domestic settings. The other vertical version, Ambrosia V, joins three light tubes placed at different heights, forming a sculptural ensemble. This option can provide a great deal of light and therefore comes with a dimming system for easy lighting control. It is available in two heights of 130 and 175 cm. Both sizes can be electrically connected through the ceiling rosette or the floor plug. The new Ambrosia allows you to create vertical lighting compositions, combining different sizes in repetition to illuminate large spaces. When installed individually, it fills the space with light and warmth. Its slender design sets the perfect scene in any room. A totally new perspective for this flexible lighting system, which achieves maximum light expression with a minimalist structure. The metal structure is available in two finishes – black and matte gold – and the light source in three colour temperatures: 2200 K, 2700 K and 3000 K.
Funiculí
Marset > Floor lamp
For Lluís Porqueras, designing consisted of eliminating the superfluous until an essential object was left: beautiful, useful and simple. This was the case with the Funiculí, a 1979 lamp that Marset reissued in 2013 and which has become an emblem of the collection.Lightweight, it takes up almost no space and can function as an ambient lamp or for direct light, depending on how you direct the beam. Its designer released the shade to give maximum mobility. It can rotate through 360 degrees to focus the light where you want and also has a double clamp system for height adjustment. For the Funiculí, forty years are nothing; it has stood the test of time and now comes in new colours that further expand its possibilities. It is no longer only available in the neutrals moss grey, black and off-white. The new colours – green, terracotta and mustard – are intense. They are design statements, highlighting the shapes of the Funiculí and bringing chromaticism to the space. The new shades are cheerful and vivid, conveying that colour can also be essential.
Matin Floor Lamp
Hay > Floor lamp
The Matin Floor Lamp offers a contemporary yet poetic design, with a construction that combines visual delicacy with physical robustness. The flat-packed design consists of a slender polished brass steel frame complemented with matte black hardware and zinc alloy joints at the base, which is paired with a pleated cotton shade in a variety of carefully selected colours. The light source is an integrated LED, offering a diffused light which is accompanied by a digital in-line dimmer floor switch to adjust the output of light if required.
Add to Project
Create New Project
Your Projects
Loading projects...