Flush-fitting frame for linear channels of the Showertec Linear system
profilitec > Accessories
Flush-fitting frame for linear channels of the Showertec Linear system Showertec STL - FW are a family of wall frames in AISI 316 stainless steel.The flush wall frame is available in the sizes 600-700-800-900-1000-1200 mm.
Flanges KIT with vertical outlet (ABS or PVC) - Showertec STC FLANGEKIT
profilitec > Accessories
Flanges KIT with vertical outlet (ABS or PVC) - Showertec STC FLANGEKIT Showertec STC - FLANGEKIT are a family of KIT flanges with vertical drain (ABS or PVC) combined with a waterproof membrane connection ring with the shower tray. The system must be combined with the grill kit consisting of grill support (plastic) and grill (stainless steel or aluminium). The system combined with the STC shower trays allows you to create shower systems with point drainage and central drain.
Drain KIT - SQUARE DRAIN KIT Showertec
profilitec > Accessories
Drain KIT - SQUARE DRAIN KIT Showertec Showertec STC - SQUARE DRAIN KIT is a shower kit for vertical drains that contains the grid support system (plastic) and the grid (stainless steel or aluminium). The system combined with the STC shower trays and STC Flange kit allows you to create shower systems with point drainage and central drain.
Shower KIT with vertical drain - DRAIN KIT Showertec
profilitec > Accessories
Shower KIT with vertical drain - DRAIN KIT Showertec Showertec STC - DRAIN KIT is a shower kit for vertical drains that contains the flange with vertical drain (ABS or PVC), combined with a waterproof membrane ring to connect the flange with the shower tray, the grid support system (plastic), the grid (stainless steel or aluminium) and the waterproofing membrane corners. The system combined with the STC shower trays allows you to create shower systems with point drainage and central drain.
STC-TRAY Presloped shower tray for Showertec system
profilitec > Accessories
STC-TRAY Presloped shower tray for Showertec system Showertec STC - TRAY are a family of pre-licensed trays compatible with the showertec central drain STC-SD with ABS and PVC flange and vertical discharge. They are made of EPS to which a waterproofing membrane is applied which, combined with the corners, strips and Foiltec membrane, make the shower impermeable to water and steam. Available in 91/91 cm, 122/122 cm, 81/152 cm and 183/183 cm versions, they can be combined with vertical drain systems in PVC and ABS. In the range there is also STC-CURB to create steps that do not allow water to escape 91 and 122 cm version.
STC-CURB Shower curb for Showertec STC system
profilitec > Accessories
STC-CURB Shower curb for Showertec STC system Showertec STC CURB, is the curb of the Showertec system and has the function of containing water in the shower area. It has the particularity of being able to be installed in various positions, giving the possibility to choose between different heights according to aesthetic and functional needs.1. Height of 6" - 15 cm: full step with opening outwards.2. Height of 4.5" - 11.5 cm: full step with opening downwards.3. Height of 4-5" - 11.5 cm: step cut in half with the EPS part without membrane facing downwards.
FOILTEC waterproofing membrane
profilitec > Accessories
FOILTEC waterproofing membrane Waterproofing membrane in coupled polyethylene, it is mainly laid in areas with strong presence of humidity together with the ceramic coating using a suitable tile adhesive.The membrane, made of soft material with high elasticity, also compensates for small movements that may occur between the support and the coating, also ensuring the non-bacterial transmission of harmful substances.The Foiltec membrane provides a complete range of accessories that adapt to the different specific laying needs, contributing to a workmanlike laying. How to install Foiltec FOILTEC INSTALLATION: Assure base is level, smooth, clean and dry. Apply adhesive using a 3x3mm “V” notched trowel. Apply WATER-STOP FOILTEC membrane with the flat edge of the trowel, pressing firmly to smooth out bubbles. Overlap sections of the membrane by 5cm, or use WATER-STOP FOILTEC/15 strips to seal joints. To guarantee waterproofing, use WATER-STOP preformed internal / external corner joints and pipe joints. FOILTEC dimensions options FOILTEC/15 Joint sealing strip in laminated polyethylene. Width: 15cm. FOILTEC/I/G Internal corner joint in preformed, laminated polyethylene. FOILTEC/E/G External corner joint in preformed, laminated polyethylene. FOILTEC/T20/G Pipe joint in preformed, laminated polyethylene.
The Foiltec waterproof joint tape
profilitec > Accessories
The Foiltec waterproof joint tape Foiltec 15/10 is the joining tape of the Foiltec waterproofing membrane with a width of 15cm and a length of 10 m. It is made of coupled polyethylene and is laid together with the membrane, mainly in areas with high humidity, together with the ceramic coating using a suitable tile adhesive.The membrane, made of soft material with high elasticity, also compensates for small movements that may occur between the support and the coating, also ensuring the non-bacterial transmission of harmful substances.
STL-TRAY Pre-sloped shower tray for Showertec Linear system
profilitec > Accessories
STL-TRAY Pre-sloped shower tray for Showertec Linear system Showertec STL - TRAY are a family of pre-sloped shower trays compatible with Showertec linear STL BS and Showertec linear STL BV and STL BC (height from 15 to 37 mm. They are made of waterproof material and thanks to the reinforcement grid and the honeycomb surface finish they are very resistant and allow a solid bond between the cement glue and the tile. Available in 91/112 cm and 132/112 cm versions, they can be combined with 91/56 cm and 132/56 cm extensions and also in combination with the 53 mm raised panel to form the STL-TRAY-R panel.
Showertec Linear TRAY-R, pre-slope shower tray with riser
profilitec > Accessories
Showertec Linear TRAY-R, pre-slope shower tray with riser Showertec STL - TRAY-R are a family of pre-sloped shower trays with riser, compatible with Showertec Linear STL BS and Showertec Linear STL BV and STL BC combined with a riser (height from 68 to 90 mm). They are made of waterproof material and thanks to the reinforcement grid and the honeycomb surface finish they are very resistant and allow a solid bond between the cement glue and the tile. Available in 91/112 cm and 132/112 cm versions, they can be combined with extensions 91/56 cm and 132/56 cm.
PD drain cover
profilitec > Accessories
PD drain cover Copridrain PD is a stainless steel square drain cover for 10/ 15 /20 mm
MUD tileable linear drain channel
profilitec > Accessories
MUD tileable linear drain channel Multidrain is a waterproof modular system for linear drainage of surface water. It can be used in tiled structures, outdoor and indoor. The system is made of PP (Polypropylene), a light but resistant material, and is composed of 1,48 meter long combinable channels with lateral or central run-off pipes. The channels internal slope functions as water run-off and is self-cleaning. The system permits even floor tiling with great time saving. The channel has a pre-felted fabric on its edge, allowing the installation of waterproofing systems (thin bed installation). The grid frames are made of stainless steel AISI 316L. The system is equipped with run-off pipes, end pieces and grids in stainless steel AISI 304.
MUDR tileable linear drain channel
profilitec > Accessories
MUDR tileable linear drain channel The Multidrain MUDR is a system that allows the realization of a pre-slope tiled linear drain by combining different modules up to 6.25 meters using only one discharge point. The system needs 7 cm height under tile.
PA DIY symmetrical corner profiles
profilitec > Accessories
PA DIY symmetrical corner profiles PROFILES DIY PA are a range of angular profiles with symmetrical sides in anodised aluminium, polished brass, PVC and steel with a length of 2 meters which are used as finishing profiles after installation.
PL DIY profiles corner and L shape
profilitec > Accessories
PL DIY profiles corner and L shape PROFILES DIY PL are a range of profiles in anodised aluminium, polished brass, PVC and "L" steel with a length of 2 meters which are used as finishing profiles after installation.
PAP DIY natural brass symmetrical corner profiles
profilitec > Accessories
PAP DIY natural brass symmetrical corner profiles DIY PAP PROFILES are a range of angular profiles with symmetrical and "L" sides in natural brass 2 meters long which are used as finishing profiles after installation.
PP Flat DIY profiles
profilitec > Accessories
PP Flat DIY profiles DIY PP PROFILES are a range of flat profiles in anodised aluminium 2 meters long which are used as finishing profiles after installation.
TT Round pipe DIY profiles
profilitec > Accessories
TT Round pipe DIY profiles DIY TT PROFILES are a range of 2 meter long round tube profiles in anodised aluminium which are used as finishing profiles after installation.
TO DIY profiles full circle shape
profilitec > Accessories
TO DIY profiles full circle shape DIY TO PROFILES are a range of solid round profiles in anodised aluminium 2 meters long which are used as finishing profiles after installation.
DIY profiles double U shape
profilitec > Accessories
DIY profiles double U shape DIY CD PROFILES are a range of profiles in anodised aluminium with double "U" shaped groove, 2 meters long, which are used as finishing profiles after installation.
PU U shape DIY profiles
profilitec > Accessories
PU U shape DIY profiles DIY PU PROFILES are a range of 2m long "U" anodised aluminium profiles which are used as finishing profiles after installation.
PT DIY profiles T shape
profilitec > Accessories
PT DIY profiles T shape DIY PT PROFILES are a range of 2m long "T" profiles in anodised aluminium which are used as finishing profiles after installation.
RE DIY profiles rectangular shape
profilitec > Accessories
RE DIY profiles rectangular shape DIY RE PROFILES are a range of 2 meter long rectangular tube profiles in anodised aluminium which are used as finishing profiles after installation.
TQ DIY profile square shape
profilitec > Accessories
TQ DIY profile square shape DIY TQ PROFILES are a range of 2 meter long anodised aluminium square tube profiles which are used as finishing profiles after installation.
QU DIY profiles full square shape
profilitec > Accessories
QU DIY profiles full square shape DIY QU PROFILES are a range of "full" square profiles in anodised aluminium 2 meters long which are used as finishing profiles after installation.
UN Bullnose DIY profiles
profilitec > Accessories
UN Bullnose DIY profiles DIY UN PROFILES are a range of flat profiles in anodised aluminium with a 2 meter long "nail" terminal which are used as finishing profiles after installation.
Leveltec leveling system, the LEV / M cap
profilitec > Accessories
Leveltec leveling system, the LEV / M cap Leveltec is a revolutionary tiling system with no current equivalents in the market. The first levelling system that requires no tools for both installation and disassembly. It is an automatic screw system that works with a simple click. The product is laid in dry conditions, without need of adhesives. The system consists of a reusable cap and a series of tie-base (linear, cross or “T”) for joints of 2 mm, 3 mm and 5 mm (according to UNI EN 11493) or joints of 1 mm. The cap is compatible with all the tie-bases that should be chosen according to the type of tile and the installation to do. Self-levelling function for tile laying The use of the Leveltec allows the perfect alignement of the upper surface of the floor with the surface of the wall, compensating not the non-planarity and the following glue shrinkage.
Linear spacer for Leveltec system
profilitec > Accessories
Linear spacer for Leveltec system Leveltec : LINEAR TIE-BASE linear tie-base, patented for stone and tile floors. LEV/10 for joints 1 mm LEV/20 for joints 2 mm LEV/30 for joints 3 mm LEV/50 for joints 5 mm
T spacer for Leveltec system
profilitec > Accessories
T spacer for Leveltec system Leveltec : “T” tie-base T-tie-base, patented for straight course lying. LEV/10T for joints 1 mm LEV/20T for joints 2 mm LEV/30T for joints 3 mm LEV/50T for joints 5 mm Indication on the amount of pcs / mq For straight course lying especially of the wood effect tiles, T-tie-base is recommended.
Cross spacer for Leveltec system
profilitec > Accessories
Cross spacer for Leveltec system Leveltec : Cross tie-base Cross tie-base patented. Suitable for small format tiles. LEV/10C for joints 1 mm LEV/20C for joints 2 mm LEV/30C for joints 3 mm LEV/50C for joints 5 mm Indication on the amount of pcs / mq Cross tie-base is recommended to optimize the consumption especially for small tiles
Plastic "cross" tie-bases to be used for floors and walls
profilitec > Accessories
Plastic "cross" tie-bases to be used for floors and walls Cross tie-bases in plastic, perforated, for laying floors and walls with calibrated and uniform grouting. Made of chemical resistant material. Available in all the different thicknesses required by the joints. Thanks to their anti-floating shape, they remain in the correct position during installation (from DIC 30 to DIC 100). They are supplied in packs of 500 pieces inserted in a display "dispenser" container.
Plastic "T" tie-bases to be used tiling floors and walls
profilitec > Accessories
Plastic "T" tie-bases to be used tiling floors and walls "T" shaped plastic tie-bases, perforated, for laying floors and walls with calibrated and uniform grouting. Made of chemical resistant material. Available in all the different thicknesses required by the joints. They are supplied in packs of 500 pieces inserted in a display "dispenser" container.
Plastic tie-base with 3 mm tabs to be used with stone and tiles in exterior applications
profilitec > Accessories
Plastic tie-base with 3 mm tabs to be used with stone and tiles in exterior applications ABS tie-bases for laying on stone or draining screed, for natural stone outdoor floors, concrete tiles or ceramic tiles. They can be used in different types of laying, dry, running or irregular laying. The product is made of ABS material resistant to UV rays and temperatures. It is transparent in such a way as to be invisible if the crushed stone is moved. At the base they have holes to facilitate water drainage. How to avoid breaking The tie-bases, thanks to the predefined breaking points, are easily adaptable to the various needs, obtaining central, corner or terminal tie-bases according to the need.
SUPAL – Low pedestal for raised floors
profilitec > Accessories
SUPAL – Low pedestal for raised floors The Uptec SUPAL support is adjustable in height from to 28 to 43 mm, with a base of 190 mm in diameter and a head of 130 mm. The support can be both self-leveling and fixed: by rotating the pre-included mechanism, it’s possible to switch from one mode to another in few seconds, without any additional accessory. When in self-leveling mode, the head can compensate slopes up to 5%. On the head it is possible to apply the accessories for standard installations (2mm spacers or 4mm spacers), the head for the wooden beam or to add the aluminium joist (on the head with 4mm spacers). Holes have been made on the base to allow the water to flow out, and on the lower side 4 pre-cut lines to easily cut the pedestals when you come to corners or perimeters.
SUPAS – Standard pedestal for raised floors
profilitec > Accessories
SUPAS – Standard pedestal for raised floors The Uptec SUPAS support is adjustable in height from to 43 to 58 mm, with a base of 190 mm in diameter and a head of 130 mm. The support can be both self-leveling and fixed: by rotating the pre-included mechanism, it’s possible to switch from one mode to another in few seconds, without any additional accessory. When in self-leveling mode, the head can compensate slopes up to 5%. On the head it is possible to apply the accessories for standard installations (2mm spacers or 4mm spacers), the head for the wooden beam or to add the aluminium joist (on the head with 4mm spacers). To reach higher elevations, just add the SUPAR stackable extension ring. Holes have been made on the base to allow the water to flow out, and on the lower side 4 pre-cut lines to easily cut the pedestals when you come to corners or perimeters.
SUPAR – SUPAR stackable ring
profilitec > Accessories
SUPAR – SUPAR stackable ring Uptec SUPAR is a stackable ring to be used in combination with the standard supports, SUPAS and SUPASFX from 58 mm up. Each extension ring is 30 mm. SUPAR has been designed to be easily assembled, thanks to the symbols placed both on the ring and on the base of the support (open padlock / closed padlock). It can be used individually or as a combination of multiple SUPAR until it reaches the desired height.
SUPAR120 - SUPAR120 stackable ring
profilitec > Accessories
SUPAR120 - SUPAR120 stackable ring Uptec SUPAR120 is a stackable ring to be used in combination with the standard supports SUPAS and SUPASFX. SUPAR120 increases the height by 120 mm on raised floors installation. SUPAR120 has been designed to be easily assembled, thanks to the symbols placed both on the ring and on the base of the support (open padlock / closed padlock). it can be used individually or with the SUPAR ring to achieve the desired height. SUPAR120 is an ideal solution that will undoubtedly save time during installation when the required height of the application exceeds 148 mm.
SUPT pedestals for floating floors installation of minimum height
profilitec > Accessories
SUPT pedestals for floating floors installation of minimum height SUPT is a support adjustable in height from 10 to 15 mm, with the appropriate adjustment key. By adding the SUPB base, the adjustment can be up to 25 mm (max 3 SUPB 3mm at the time). Available in two variants: SUPT, with 2 mm spacers, SUPT4 with 4 mm spacers.
8010 & 8020 pedestals for floating floors installation
profilitec > Accessories
8010 & 8020 pedestals for floating floors installation SET floating floor supports in polypropylene offer good resistance to ice and weathering. Easy to install, the system can compensate elevation differences by simply stacking tie-bases into the base. Placed directly onto the sloping waterproof membrane, they provide an elevated drainage system and allow access for future maintenance. Ideal for balconies, balconies, roof gardens and walkways
SUPAANG240 aluminium joist for large format tiles
profilitec > Accessories
SUPAANG240 aluminium joist for large format tiles SUPAANG240 offers maximum freedom and flexibility in terms of tile sizes to be used and allows for floors with different laying options and various covering materials. The SUPAANG240 aluminium joist is 2.40 meters long and can be combined with the 4 mm SUPA4 tabs. Openings on the base ensure proper water outflow, a safe and stable attachment to the pedestal head and allow the height to be adjusted with the SUPAK key during and after installation. SUPAANG240 comes with the anti-noise rubber bands already installed to save installers valuable time during installation.
Rubber mat in recycled material, designed to protect the bituminous membrane (roof deck membrane)
profilitec > Accessories
Rubber mat in recycled material, designed to protect the bituminous membrane (roof deck membrane) The SUPATG rubber mat is placed under our Uptec pedestals. It serves to protect the bituminous membrane. It is made of recycled material and its properties make it resistant to low temperatures and pedestrian traffic. It is also non-slip, water-repellent and anti-noise.
SUPA2 – SUPA2 accessory for pavers with 2 mm tabs
profilitec > Accessories
SUPA2 – SUPA2 accessory for pavers with 2 mm tabs The Uptec SUPA2 accessory, with 2 mm tabs (ideal to create 2 mm joints), is made of a two-component material: polypropylene for tabs and rubber on the head to guarantee a noise-reducing and anti-slip characteristic. The tabs can be removed using the SUPAK key depending on the floor configuration. This accessory is to be used in combination with SUPAL and SUPAS pedestals.
SUPA4 – SUPA4 accessory for pavers with 4 mm tabs
profilitec > Accessories
SUPA4 – SUPA4 accessory for pavers with 4 mm tabs The Uptec SUPA4 accessory, with 4 mm tabs (ideal to create 4 mm joints), is made of a two-component material: polypropylene for tabs and rubber on the head to guarantee a noise-reducing and anti-slip characteristic. The tabs can be removed using the SUPAK key depending on the floor configuration. SUPA4 can also be used in combination with the aluminum joist. This accessory is to be used in combination with SUPAL and SUPAS pedestals.
SUPAW – SUPAW accessory to lay wood decking on wooden joists
profilitec > Accessories
SUPAW – SUPAW accessory to lay wood decking on wooden joists The Uptec SUPAW accessory is ideal for laying wood on a wooden joist. The special slots located along the flap allow rapid fixing to the joist with standard screws. The hooks located under the base of the flap allow easy attachment to the pedestal and possible removal from it. This accessory is to be used in combination with SUPAL and SUPAS pedestals.
SUPACLPP - Perimeter clip
profilitec > Accessories
SUPACLPP - Perimeter clip The SUPACLPP perimeter clip, is applied to the head of the supports that delimit the wall perimeter of the installation. The aim is to create a minimum distance from the wall so that the flooring, once laid, is able to absorb expansion and not create tension in the structure. How to position the clip Always position the clip with the two side hooks upwards. The central slot in the SUPACLPP clip allows interlocking between the tie-bases on the head of the pedestal. The SUPACLPP clip allows you to distance the installation from the wall, absorbing expansion and protecting the tile from possible tensions or breakages.
SUPACLPB & SUPACLPT Top and bottom clip
profilitec > Accessories
SUPACLPB & SUPACLPT Top and bottom clip The SUPACLPB and the SUPACLPT are used like accessories to make tiled external perimetral edges. How to position the clip 1. The SUPACLPB clip will be positioned under the pedestal with the three hooks positioned under the pedestal once it has been cut 2. The SUPACLPT clip will be positioned above the pedestal with the three hooks positioned under the pedestal once it has been cut Example of installation with clips
SUPL compensator
profilitec > Accessories
SUPL compensator SUPL, compensator for fixed head raised floor pedestals. They are 3 DB noise reducers, from 52 DB to 49 DB.
SUPAK 3 ways adjustment key
profilitec > Accessories
SUPAK 3 ways adjustment key Uptec SUPAK is the adjustment key and performs three functions: 1. Change from fixed head to self-levelling 2. Removing the tie-bases 3. Height adjustment
BSR Perimeter profile to hide and finish the edge of the terrace / patio
profilitec > Accessories
BSR Perimeter profile to hide and finish the edge of the terrace / patio Bordertec BSR is a painted aluminium profile that acts as a perimeter closure of a raised floor. Available in different sizes and colors.
BSJ Border profile to be used with 2cm tiles
profilitec > Accessories
BSJ Border profile to be used with 2cm tiles Bordertec BSJ is a 2 cm decorative visible profile. It allows the lateral closure of a raised floor, fitting the tile vertically in the appropriate groove of the profile.