Profilitec

Drain KIT - SQUARE DRAIN KIT Showertec by Profilitec

Key details

Brand	Profilitec
Category	Accessories
Size	Medium

View on supplier site Email the brand

Description

Drain KIT - SQUARE DRAIN KIT Showertec Showertec STC - SQUARE DRAIN KIT is a shower kit for vertical drains that contains the grid support system (plastic) and the grid (stainless steel or aluminium). The system combined with the STC shower trays and STC Flange kit allows you to create shower systems with point drainage and central drain.

Frequently Asked Questions

Is the Drain KIT - SQUARE DRAIN KIT Showertec suitable for commercial projects?

Yes, the Drain KIT - SQUARE DRAIN KIT Showertec by Profilitec is suitable for both residential and commercial interiors. It is commonly specified by interior designers and architects for hospitality, office, and retail environments.

Can the Drain KIT - SQUARE DRAIN KIT Showertec be used outdoors?

The Drain KIT - SQUARE DRAIN KIT Showertec is designed for indoor use only.

Specifications

Indoor / Outdoor	Indoor
Durability	Heavy-duty
Size	Medium
Brand	Profilitec
Category	Accessories

More Accessories by Profilitec

TRIMTEC TR: multipurpose profiles in different materials

Profilitec > Accessories

TRIMTEC TR: multipurpose profiles in different materials TRIMTEC TR is a complete range of brass, aluminium and stainless steel trim profiles designed for fast and efficient installation of any flooring type, regardless of size and thickness. TRIMTEC TR is available in various heights from 2 to 30 mm, matching different tile thicknesses. In the aluminium and brass versions, a dovetail groove maximizes the grout grip and edge protection for both vertical and horizontal tile laying. TRIMTEC TR profiles are conceived for tile laying, but can also be used with other types of flooring such as stone, wood and industrial resin floors. TRIMTEC TR profiles are mainly used as transition trims between two types of flooring (for example between tiling and moquetteing) and as expansion joints when two lengths are laid side by side. They can also be used as trimming for ceramic skirtings and as edge protection for any floor thickness. In some cases the profiles may be used as entrance mat framing. TRIMTEC TR Curveline: the bendable version of the TR TRIMTEC TR series is also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code. TRIMTEC TR how to install 1) Choose the trim size according to the tile thickness. The trim should be 0.5+/-1mm lower than the tile, therefore not exceeding the height of the tile. 2) Apply tile adhesive. 3) Cut the profile to required length, leaving extra space for linear expansion. The perforated flange of the trim is then firmly embedded into the adhesive and aligned. 4) Trowel an additional layer of adhesive over the perforations in the profile and in the dovetail groove of the vertical section. 5) Leave a tiny gap of approximately 0.5+/-2mm between the trim and the tile for final grouting.

TRIMTEC SR Edging perimeter profiles for ceramic floors

Profilitec > Accessories

TRIMTEC SR Edging perimeter profiles for ceramic floors TRIMTEC SR is especially recommended for finishing the perimeter of ceramic floors, particularly when they abut a vertical surface. It is also used as stair nosing and trimming in balconies and exit ways. TRIMTEC SR profiles have an extended vertical edge to cover and protect border surfaces and prevent future cracking. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. The aluminium section is designed with vertical dovetail anchoring. TRIMTEC SR CURVELINE: bendable profiles TRIMTEC SR series is also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code.

BORDERTEC SBR Edging profiles for balconies and patios

Profilitec > Accessories

BORDERTEC SBR Edging profiles for balconies and patios The BORDERTEC BSR is recommended for contouring marble and stone balconies and sidewalks. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. BORDERTEC BSR in size BSR 20/* can be used with PROFILITEC floating floor support systems. BORDERTEC BSR contains all necessary elements for state-of-the-art installation.

ROUNDJOLLY profiles for thin floors

Profilitec > Accessories

ROUNDJOLLY profiles for thin floors ROUNDJOLLY profiles join floor types of different thicknesses, finishing and protecting the tile edge. Available in aluminium and stainless steel, this profile is ideal for renovations with thin tiles.

SQUAREJOLLY SJ: square shape trims

Profilitec > Accessories

SQUAREJOLLY SJ: square shape trims Squarejolly SJ is a multipurpose aluminium profile used in laying adhesive ceramic floor and wall coverings. Its uniquely symmetrical shape lends itself to endless detailing possibilities. In the technical specs, H corresponds to the tile thickness and B = H + 1mm corresponds to the visible width of the profile. In the aluminium version, a patented internal cavity with a dovetail groove maximizes vertical grout grip and edge protection. The sectional design of the SQUAREJOLLY SJ profile provides a completely leveled surface, making it resistant to vertical loads and perfectly suitable for flooring applications. How SJ models can be used SQUAREJOLLY SJ is a multipurpose profile with a wide range of applications: • Leveled flooring intersections • Decorative accent bands • Wall tile contouring • Entrance mat framing • skirting finishing and edging • Stair nosing

COVERTEC EP: Transition trims for floors with the same height

Profilitec > Accessories

COVERTEC EP: Transition trims for floors with the same height The COVERTEC EP profile joins two adjacent flooring surfaces (for example: concrete/ceramic tile, wood/ceramic tile and other resin or vinyl floor combinations). The overlapping section allows differential movement of the flooring, hides edging imperfections and prevents chipping and cracking. Available in aluminium and brass with patented dovetail anchoring.

COVERTEC SP: T shape trims for floors with the same height

Profilitec > Accessories

COVERTEC SP: T shape trims for floors with the same height COVERTEC SP is a profile designed to join two adjacent existing floors at the same height but it can cover imperfections in cutting or slight variations of height to be found on a tiled floor joining to a wooden one for example. Thanks to its shape, available in 3 different widths, this profile helps floor coverings to maintain the minimum distance thus acting also as a dilatation joint.

STRIPTEC ST: Transition trims for floors with different heights (max 5mm)

Profilitec > Accessories

STRIPTEC ST: Transition trims for floors with different heights (max 5mm) STRIPTEC ST profiles are designed to join adjoining floors of equal or different type and thickness. The rounded shape of this profile covers edge imperfections and allows a slight rotation, compensating for elevation differences of up to 5mm. It can also be used as a termination profile, given a floor thickness of up to 5mm. Available in two versions: self-adhesive and screw-on. STRIPTEC how to install Installation of self adhesive version: 1) Make sure the base is solid, flat, level, clean and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of the pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

STRIPTEC ST38: Transition trims for floors with the same heights

Profilitec > Accessories

STRIPTEC ST38: Transition trims for floors with the same heights ST38 aluminium profiles (available in the adhesive or perforated version) for transition or threshold cover with knurled surface. Slightly rounded shape. The shaped edge allows perfect contact with the floor. Used to minimize installation defects and creating expansion joints.

STRIPTEC STP: Transition trims for floors with the same heights

Profilitec > Accessories

STRIPTEC STP: Transition trims for floors with the same heights STP Brass profiles (available in the adhesive or perforated version) for connection or threshold cover with smooth brass surface. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

STRIPTEC STB: Transition trims for floors with the same heights

Profilitec > Accessories

STRIPTEC STB: Transition trims for floors with the same heights STB profiles in brass or aluminium (available in the adhesive or perforated version) for connection or threshold cover with smooth brass and aluminium grooves. The shaped edge allows perfect contact with the floor. Suitable for eliminating laying defects and creating expansion joints.

MULTICLIP CLG Transition trims for all kind of floors

Profilitec > Finishes accessories

MULTICLIP CLG Transition trims for all kind of floors The innovative, patented MULTICLIP® CLG 370 profiles has a tilting head to adjust minor height differences up to 3mm. MULTICLIP CLG allows flooring expansion and contraction making it the perfect transition profile in between different flooring materials. You can easily increase the height by stacking up to 3 plastic rails one on top of the other. A 16mm internal cavity acts as an expansion joint, allowing 5mm of differential movement. Typically, laminate wood flooring expands about 5mm per plank due to humidity.

MULTIFIIX CLG Transitions trims for floors with the same height

Profilitec > Accessories

MULTIFIIX CLG Transitions trims for floors with the same height Patented transition profile for floors at the same level, slightly rounded in anodised aluminium finish and with high resistance wood effect coating. This article has been conceived for a purely domestic environment and for Do-it-yourself use, to be fixed primarily with the nylon "MULTIFIX" plugs. MULTIFIX how to install 1. Forare con punta da 6 mm 2. Inserire gli appositi tasselli 3. Allineare i tasselli 4. Martellare in modo uniforme

MULTICOVER CLG - Transition trims for floors with the same height

Profilitec > Accessories

MULTICOVER CLG - Transition trims for floors with the same height CLG transition profiles in anodised aluminium finish and with high resistance wood effect coating. The elements that make up the MULTICOVER® system fit perfectly thanks to the plastic rail and do not move once clipped together. The profiles are also available in a perforated version, for fixing with screws and plugs or self-adhesive, equipped with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective paper from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry

WOODTEC LG edging trims for wooden floors

Profilitec > Accessories

WOODTEC LG edging trims for wooden floors WOODTEC LG profiles are specifically designed to join two adjoining floating wood floors. The size and shape of the profile section allows for differential movement typical of wood flooring. Its smooth top surface fits under doorways making it perfectly suitable for thresholds.

CARPETEC MG transition trims for carpet floors

Profilitec > Carpet

CARPETEC MG transition trims for carpet floors Designed for carpet flooring, CARPETEC MG profiles are composed of two elements: a base track onto which the carpet is laid, and an interlocking, grooved top piece that snaps shut and compresses the carpeting.

CARPETEC MP Transition / edging trims for carpet floors

Profilitec > Carpet

CARPETEC MP Transition / edging trims for carpet floors The multipurpose, grooved moquetteEC MP profiles designed to compress moquette flooring at different elevations. They may be used to join two types of moquetteing or as edge profiles.

STC Profile to cover electric cables

Profilitec > Accessories

STC Profile to cover electric cables Profile used to cover electric cables. Available in the adhesive version.

CUBETEC CU: Transition trims for floors with the same height

Profilitec > Accessories

CUBETEC CU: Transition trims for floors with the same height CUBETEC CU is a decorative profile that allows you to create a transition between floors of the same height or as a wall transition. The profile is characterized by the constancy of the visible dimension (8 mm) which is independent of the height of the profile. Available in polished AISI 304 stainless steel and satin steel.

CUBETEC FI: Transition trims for floors with the same height

Profilitec > Accessories

CUBETEC FI: Transition trims for floors with the same height CUBETEC FI is a linear and decorative finishing element which provides long-lasting and heavy-duty tile edge protection. The CUBETEC FI profile is a decorative joint between different flooring types, trimming for ceramic tile and suitable for welcome mat framing. Two profile widths are available in polished stainless steel AISI 304.

VARIOTEC DS Transition trims to be used after flooring installation

Profilitec > Accessories

VARIOTEC DS Transition trims to be used after flooring installation VARIOTEC DS is a stainless steel or brass profile for floors with differences in height from 7 to 12 mm. Supplied with adhesive on the lower side for a quick and long-lasting installation. Fitting to combine ceramic or parquet floors with lower thickness materials, such as moquettes or vinyl floors. Adhesives: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

LINETEC PR Transition trims

Profilitec > Finishes accessories

LINETEC PR Transition trims Extruded brass transition profile. Perimeter profile for wooden floors or ceramic with thickness 10 mm. They allow to solve quickly and with an excellent aesthetic result the most frequent junction situations between floors of different nature, where an appropriate connection system has not been foreseen at the time of installation.

LINETEC PQ Transition trims for floors with the same height

Profilitec > Accessories

LINETEC PQ Transition trims for floors with the same height Profiles in extruded brass or stainless steel for transition between floors already installed. It fits between floors of 10 mm thick. They allow to solve quickly and with an excellent aesthetic result the most frequent transition situations between floors of different nature, where an appropriate transition system has not been foreseen at the time of installation.

LINETEC PU Transition trims for floors with the same height

Profilitec > Accessories

LINETEC PU Transition trims for floors with the same height Extruded U-shaped brass profile for transition between floors already installed of 10 mm thick. It solves quickly and with an excellent aesthetic result the most frequent transition situations between floors of different nature, where an appropriate connection system has not been foreseen at the time of installation.

MULTICPLIP CLP perimetral trims that allows the flooring expansion / contraction

Profilitec > Accessories

MULTICPLIP CLP perimetral trims that allows the flooring expansion / contraction The patented MULTICLIP® CLP 270 aluminium perimeter profile allows floor edge finishing without skirtings. A 16mm internal cavity allows 3/16’’ (5mm) of differential movement. This profile is also suitable along sliding door tracks and as entrance mat framing.

WOODTEC LT edging trims for wooden floors

Profilitec > Accessories

WOODTEC LT edging trims for wooden floors The WOODTEC LT profiles are specifically designed for finishing the perimeter of floating wood floors, particularly when they transition to another floor type at the same elevation or abut a vertical surface. While acting as an expansion joint, they also allow floor edge finishing without skirtings. This profile is also suitable along sliding door tracks and as entrance mat framing. Installed with flathead screws.

CARPETEC MD edging tims for carpet floors

Profilitec > Carpet

CARPETEC MD edging tims for carpet floors Perimeter profiles in anodised aluminium for flexible floors such as moquettes and coconut mats. The profiles, by pressing them, close, locking the edge, covering the cutting defects and preserving the edge. Available in the perforated and with hooks version to allow a better grip of the moquette.

CARPETEC MS edging tims for carpet floors

Profilitec > Carpet

CARPETEC MS edging tims for carpet floors Rounded perimeter profile in anodised aluminium or brass for flexible floors such as moquetteing and coconut mats. The profiles, by pressing them, close, locking the coating in a lasting way, covering the cutting defects and preserving the edge. The profile is serrated both in the rounded part on the inside and on the surface to allow a better grip of the moquette.

ENTRYTEC BU Profiles for entrance mattings

Profilitec > Accessories

ENTRYTEC BU Profiles for entrance mattings Reversible profile to create perimeters suitable for containing coconut doormats, moquettes or technical aluminium doormats. The profile, thanks to the particular shape, allows to obtain the two most common doormat thicknesses of 18 and 23 mm. The laying of the frame, which can be easily assembled with the brackets supplied, must be prepared at a height before laying the adjacent floor. The profile can also be laid with the help of modular and sliding fixing brackets inside the slots.

ROUNDTEC RD Transition trims for floors with different heights

Profilitec > Accessories

ROUNDTEC RD Transition trims for floors with different heights The ROUNDTEC profile is mainly used in transitioning floor types of different thicknesses, for example from ceramic tile to thin linoleum. Its rounded section provides a smooth level change of 3mm, making it suitable between two floor types or as an end profile. ROUNDTEC can even be used as stair nosing or edging for tile countertops. Available in brass with patented dovetail anchoring.

ZEROTEC ZRM Ramp trims for floors with different heights

Profilitec > Accessories

ZEROTEC ZRM Ramp trims for floors with different heights ZEROTEC ZRM profile is the ideal solution for joining two floors at different levels, between a ceramic covering and one in moquette moquetteing for instance. This trim allows a 5 mm progressive sloping difference to the next floor to match thus making safer when treading over the connecting floors. The ramp inclination has been conceived for vehicle and wheel carts transit.

ZEROTEC ZR Transition trims for floors with different heights and of different materials

Profilitec > Finishes accessories

ZEROTEC ZR Transition trims for floors with different heights and of different materials ZEROTEC ZR allows the installer to perfectly match different floor levels when laying ceramic tile or wood flooring over an existing floor. Because of the slope, ZEROTEC profiles are ideal in passage areas for hand trolley and cars, while providing edge protection resistant to vertical loads. The brass version is recommended for industrial applications in garages and shopping centers. Available in aluminium and brass with patented vertical dovetail anchoring. ZEROTEC ZR Curveline: bendable version of the Zerotec Some ZEROTEC ZR profiles are also available with a specially-cut flange that allows shaping for curved edges and inlays. To order: add the letter D to the product code.

Zerotec ZRN60 Transition trims for floors with different heights and of different materials

Profilitec > Accessories

Zerotec ZRN60 Transition trims for floors with different heights and of different materials Zerotec ZRN60 has been designed to optimize transitions between different flooring materials, situation that often occurs in public environments such as hotels and restaurants. Its delicate line and its defined inclination allow to optimize the transition between different heights: from 8, 10 or 12.5 mm thick tiles to another 6 mm thick floor, giving a modern and elegant touch to the environment. The ramp length is 8.5 mm fixed for all heights. This particular design protects and hides the portion of the underlying coating (6 mm thick) from impacts and mechanical hits, preventing its possible breakage.

Zerotec ZR60 Transition trims for floors with different heights and of different materials

Profilitec > Accessories

Zerotec ZR60 Transition trims for floors with different heights and of different materials Zerotec ZR60 has been designed to optimize transitions between different flooring materials; it can be typically found in public spaces, like hotels and restaurants. Its delicate line and gradual inclination allows a smooth transition between different floor levels: from 8 mm, 10 mm and 12.5 mm tile to an adjacent floor covering with a thickness of 6 mm, excellent for modern and elegant interior detailing. The profile’s unique shape hides and protects the edge of the flooring below (6 mm thickness) from mechanical impact, hiding imperfections while preventing damage caused by passage and use.

Profili RAMPTEC ZRR Ramp trims for floors with different heights

Profilitec > Accessories

Profili RAMPTEC ZRR Ramp trims for floors with different heights The 20° slope of the anodised aluminium RAMPTEC ZRR profile provides a safe and progressive transition between two different floor levels. The vertical edge has a dovetailed internal cavity that maximizes grout and adhesive grip on load bearing points.

LEVELTEC RPR Transition trims to be used after flooring installation

Profilitec > Accessories

LEVELTEC RPR Transition trims to be used after flooring installation LEVELTEC RPR is a model with the function of perimeter or connection profile between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wooden floors or moquetteing. LEVELTEC RPR is able to compensate for differences of 8 ÷ 14 mm. The profile is normally supplied with an adhesive with high sealing characteristics or without an adhesive.

LEVELTEC RP Transition trims to be used after flooring installation

Profilitec > Finishes accessories

LEVELTEC RP Transition trims to be used after flooring installation LEVELTEC RP is a series of profiles with a terminal or connecting function between floors of different nature and thickness. These profiles also cover any chipping of the ceramic edge and imperfect cuts of wood or carpet floors. The LEVELTEC RP series consists of profiles with heights between 4.5 ÷ 12.5 mm, capable of compensating for height differences of 3 ÷ 14 mm. The profile is normally supplied with adhesive of high sealing properties. They are also available in a drilled version for fixing with screws and dowels. LEVELTEC RP: transition profile in different dimensions Smooth and grooved LEVELTEC profiles in varying widths and heights transition floors of different elevations. Their sectional thickness makes them especially suitable for high traffic areas and the end detailing allows frictionless contact between the profile and floor. LEVELTEC RP how to install Installation of self-adhesive version: 1) Make sure the base is solid, flat, level, clean, and dry. 2) Cut the profile to the desired length and remove adhesive backing. 3) Press uniformly downwards on to the profile to apply. Do not hammer. Installation of pre-drilled version: 1) Cut the profile to the desired length and mark the position of the pre-drilled holes. 2) Fasten with flathead screws.

VARIOTEC DC Adhesive flooring profiles

Profilitec > Accessories

VARIOTEC DC Adhesive flooring profiles VARIOTEC DC profiles’ innovative design elegantly rotates and adapts to match different floor elevations. By simply rotating its shape, this profile can adapt to floor thicknesses ranging from 7 to 14mm. Use our adhesive for on-site installation.

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8")

Profilitec > Accessories

VARIOTEC DK Transition trims to be used after flooring installation between 7mm and 16mm (9/32" to 5/8") Especially conceived for residential and light commercial use, VARIOTEC DK profiles are available in a wide range of decorative finishes. This profile series is designed to join different floor types with an elevation difference ranging from 7 to 16mm. VARIOTEC DK profiles are self-adhesive - simply cut the profile to the desired length, remove the adhesive backing and press uniformly downwards on to the profile to install. Always make sure the base is solid, flat, level, clean and dry.

VARIOTEC DR Transition trims to be used after flooring installation

Profilitec > Accessories

VARIOTEC DR Transition trims to be used after flooring installation VARIOTEC DR are stainless steel or brass profiles used as a transition between already installed floors of different nature and level. Self-adhesive: they are supplied with a particular elastomer which allows an easy and quick application. For installation, simply remove the protective film from the adhesive and apply the profile, cut to the required length, with uniform pressure. For a good seal, the support surface must be smooth, clean and dry.

Recently Viewed Products

Flex High Back SI1621

Andreu World > Chair

Stackable chair with Eco thermo-polymer shell available in several colors or Pure Eco thermo-polymer (100% recycled) available in s and color and a steel sled base finished in polished chrome, white or black. Optional fully upholstered shell or parallel upholstery stitching. Optional upholstered seat pad. The upholstered version includes a stacking protector. Fire retardant version available, f r further information contact our Sales Department.

Soft Glass sofa

Tonelli Design > Sofa

LINO CANCUN

Skema > Wallcovering

BIANCO SR209

Skema > Wallcovering

ZEROTEC ZLT25

Profilitec > Accessories

ZEROTEC ZLT25 Resilient materials are commonly used for floors and walls as well as over existing flooring. For thinner flooring materials, we recommend profiles that can be solidly anchored and provide maximum edge protection. The ZEROTEC family of profiles meets these needs by providing a solid base with tapered openings for mechanical fastening or to be adhered using appropriate adhesive. ZLT25 profiles provide sloped and ADA-compliant edge protection for resilient flooring materials of different heights ranging from 3/32” (2.5mm) up to 3/16” (5mm) or ¼” (6mm).

Drain KIT - SQUARE DRAIN KIT Showertec

Profilitec > Accessories

BREAK - Rectangular marble garden table

Giorgetti > Table

The BREAK table by Ludovica and Roberto Palomba is an exquisite blend of form and function, embodying the essence of modern design with a touch of elegance. Crafted from high-quality materials, this modular rectangular table features an Etna lava stone surface that elegantly showcases a chequerboard pattern, creating a striking visual impact. The base consists of two decorative elements—one opaque and one transparent—that alternate in a sophisticated manner, adding depth to the design. The construction is meticulously designed with legs made from wood and metal, which not only provide structural support but also contribute to its minimalist yet captivating appearance. This composition evokes the charm of fusuma panels used in traditional Japanese architecture for room separation, creating an immersive experience that seamlessly blends functionality with aesthetic appeal. Design features include a versatile modular design that can be arranged in various configurations, making it suitable for both indoor and outdoor spaces. The BREAK table is ideal for contemporary living rooms, dining areas, or as a focal point in open-plan living environments where flexibility is key. Its robust yet lightweight construction ensures durability while maintaining an elegant presence. For those who wish to maintain the beauty of this piece over time, proper care tips are essential. Regular cleaning with a mild detergent and water should suffice for daily maintenance. Periodic sealing can help protect against stains and weathering effects. Additionally, placing it in a sheltered area away from direct sunlight will prevent any discoloration or fading. The BREAK table by Ludovica and Roberto Palomba is not only a testament to the designers' innovative approach but also an embodiment of timeless design that seamlessly integrates functionality with style. Its modular nature allows for endless possibilities in space planning, making it a versatile addition to any home or commercial setting.

SUITE - LED floor lamp

Vibia > Floor lamp

The modern floor lamp combines sleek design with functionality, featuring a matte metal finish and an adjustable cone shade. Ideal for living rooms, this floor-standing piece offers both illumination and storage with integrated shelving, embodying contemporary elegance.

MOD-6WW6

A.L.S. > Functional light

Modulo A wall light fitting, LED 5W, 3000K, 24V, meteor grey

MOD-6WW1

A.L.S. > Functional light

Modulo A wall light fitting, LED 5W, 3000K, 24V, white

MOD-6WW08

A.L.S. > Wall lamp

MODULO A wall light fitting, LED 5W, 3000K, 24V, ibiza sand

MOD-3WW7

A.L.S. > Wall lamp

Modulo A square wall light fitting, 3W, 3000K, 24V, alu grey

MOD-3WW08

A.L.S. > Wall lamp

Modulo A square wall light fitting, 3W, 3000K, 24V, sand

JACKPR2-202

A.L.S. > Wall lamp

JACK Wall and ceiling luminaire

Fläpps Shelf 80x27-1 - Sunrise - Joa Herrenknecht

Ambivalenz > Cabinet

Fläpps Regal 80x27x1 - Das Schmale Reduzierter geht es nicht. Dieses schmale Wandboard treibt Compact Living auf die Spitze. Mit nur 27 cm Höhe passt es unter jede noch so niedrige Decke und in jeden noch so schmalen Flur. Zum Beispiel als auffallend zurückhaltender Platz für Lieblingsbücher. Auch für Lesemuffel. So viele Funktionen. Flurregal, Bücherregal, Kochbuchregal, alles egal, Nachttisch, Beistelltisch, richtisch gut.

Fläpps Secretary 80x50-1 - Sunrise - Joa Herrenknecht

Ambivalenz > Desk

Platzsparender Wandsekretär für den Morgenstart Sunrise von Joa Herrenknecht sorgt für gute Laune am Arbeitsplatz. Der Fläpps Sekretär 80x50-1 bleibt der König der platzsparenden Wandsekretäre, liefert aber mit dem sonnigen Design einen Extra-Kick. Für alle, die morgens mehr als Kaffee brauchen - Flexibilität inklusive. Produkt Infos

Fläpps Kitchen Table 80x80-1 - Black

Ambivalenz > Table

Klappbarer Wandtisch für die Küche in Schwarz Der Fläpps KittchenTisch 80x80 - Schwarz bringt Kontrast und Klarheit in kleine Küchen. Ein Tisch, der sich dezent zurücknimmt, aber voll zur Stelle ist, wenn es darauf ankommt. Zum Frühstück, für Gespräche oder als mobiles Homeoffice. Minimalismus für Genießer. Produkt Infos

Fläpps Shelf 80x80-2 - White

Ambivalenz > Cabinet

Wandregal mit Schreibtischfunktion Fläpps Regal 80x80-2 - Weiß ist das Möbel für alle, die sich nicht entscheiden wollen: Regal, Sekretär oder Steharbeitsplatz? Beides! Dieses klappbare Wandregal offenbart eine praktische Arbeitsfläche und verschwindet bei Nichtgebrauch wieder in die Wand. Clever, schön und überraschend vielseitig. Produkt Infos

Fläpps Secretary 100x60-1 - White

Ambivalenz > Desk

Design Wandschreibtisch mit mehr Platz Der Fläpps Sekretär-in 100x60-1 - Weiß ist für alle, die etwas mehr Raum zum Denken brauchen. Die größere Arbeitsfläche bietet Platz für Laptop, Kaffeetasse und Gedankensalat. Klappbar, klar und kompromisslos schön - ein Design Wandschreibtisch für große Ideen auf kleinem Raum. Produkt Infos

Fläpps Shelf 80x27-1 - Vallunaraju - Joe Mania

Ambivalenz > Cabinet

Fläpps Shelf 80x27-1 - Watercolor Stripes- Pattern Studio

Ambivalenz > Cabinet

Fläpps Shelf 60x27-1 - Snowdreamer - Monika Strigel

Ambivalenz > Cabinet

Fläpps Regal 60x27-1 - Das schmale Schlanke Dieses zugleich schmale als auch schlanke schöne Klappregal schmiegt sich gern an jeden 60er standard Küchenschrank. Eingesetzt als Küchenregal fühlen sich Salz und Pfeffer, Essig und Öl oder das aufgeschlagene Kochbuch immer willkommen auf der passgenauen Wandablage. Aber auch im Wohnzimmer oder Flur fühlt es sich wohl und bietet einen schönen Ort zum Anlehnen für eine beträchtliche Anzahl Bücher. So viele Funktionen. Wussten Sie schon: Schmale Wandregale machen eine schlanke Figur. Als Küchenregal, als Ablage im Eingangsbereich oder auch als kleines Badezimmerregal.

Fläpps Secretary 80x50-1 - Alps - Joe Mania

Ambivalenz > Desk

Kleiner Schreibtisch für die Wand mit Alpenblick Alps von Joe Mania bringt das Gipfelgefühl direkt ins Arbeitszimmer. Der Fläpps Sekretär 80x50-1 bleibt kompakt und klappbar, macht aber jede Nische zum Lieblingsplatz. Für alle, die ihren Arbeitsplatz mit einer Portion Fernweh würzen möchten. Produkt Infos

Add On: Hanging Upanddown

Ambivalenz > Cabinet

Höhenverstellbarer Wandschreibtisch mit System Die Aufhängung Upanddown macht aus jedem Fläpps Wandschreibtisch ein ergonomisches Wunderwerk. Höhenverstellbar, stabil und perfekt für wechselnde Arbeitspositionen - von stehenden Gedankensprüngen bis zu tiefen Sitzungen. Für alle, die Bewegung in die Denke bringen wollen. Verwandle deinen Fläpps Schreibtisch im Handumdrehen in einen Steharbeitsplatz. Lass die Höhe deines Fläpps Tischs mit Deinen Kindern mitwachsen oder teile Deinen Steharbeitsplatz mit unterschiedlich großen Menschen. Mit den längeren Aufhängeleisten kannst Du schnell und einfach die Arbeitshöhe Deiner Fläpps Sekretär/in oder auch der Fläpps Regale und Garderoben ändern. Damit die sichtbaren Enden der Leisten möglichst wenig auffallen sind sie in dezentem Weiß gehalten. Länge 71 cm. Höhenverstellung um ca. 52 cm. Material: Multiplex Birke Maße: 71 x 2 x 1cm Art.Nr.: AOFL0902 (Fläpps Sekretär/in nicht enthalten)

Fläpps Folding Chair - Messerblumen (on birch)

Ambivalenz > Chair

Zugegeben, die Idee ist etwas flach. Der Fläpps Klappstuhl. Endlich darf ein Klappstuhl bleiben. Fläpps muss nicht hinter den Schrank, in die Kammer, die Nische, wie die meisten seiner Artgenossen. Seine Motive machen ihn salonfähig. Steht er doch mal im Weg, passt er auch in die kleinste Lücke. Fläpps ist 20mm flach. Klappt man oben, klappt es unten. Ein Handgriff reicht aus. Denn eigens für Fläpps wurde ein Klappmechanismus entwickelt. Dabei ist Fläpps so stabil wie die meisten anderen Klappstühle und, dank flexibler Rückenlehne und des leichten Federns, bequemer als man denkt. Ein freischwingender Klappstuhl.

Fläpps Folding Chair - Colored Lines

Ambivalenz > Chair

Fläpps Shelf 80x27-1 - Black

Ambivalenz > Cabinet

Fläpps Folding Chair - Black

Ambivalenz > Chair

Cloud

Calico Wallpaper > Wallpaper

Wabi Cloud – Mural

Paule Marrot, Green and White Abstract (Var. 2)

Jonathan Adler > Styling

From the archives of legendary textile artist, engraver and painter Paule Marrot (1902-1987) comes this beautiful, wide-ranging collection of digitally re-mastered prints. Working primarily from 1920-1960, her rich colors and striking geometry put her at the heart of the Art Deco movement. Influenced by Renoir and writer Marcel Proust, Marrot captured the natural world in a simple, lyrical style that makes her work as engaging and contemporary today as it was during the height of her popularity. Each work of art is hand-curated and framed using a linen liner and wood frame and printed on rich, archival rag paper.Not eligible for discount.

Paule Marrot, White and Black Abstract (Var. 2)

Jonathan Adler > Styling

Paule Marrot, Midnight Blue Magnolias (Var. 2)

Jonathan Adler > Styling

Paule Marrot, Flower Garden Gris (Var. 2)

Jonathan Adler > Styling

Paule Marrot, Green Magnolias (Var. 2)

Jonathan Adler > Styling

Paule Marrot, Green Brown Stripes (Var. 2)

Jonathan Adler > Styling

Paule Marrot, Vase with Roses (Var. 2)

Jonathan Adler > Styling

Paule Marrot, Black Tree (Var. 2)

Jonathan Adler > Styling

From the archives of legendary textile artist, engraver and painter Paule Marrot (1902-1987) comes this beautiful, wide-ranging collection of digitally re-mastered prints. Working primarily from 1920-1960, her rich colors and striking geometry put her at the heart of the Art Deco movement. Influenced by Renoir and writer Marcel Proust, Marrot captured the natural world in a simple, lyrical style that makes her work as engaging and contemporary today as it was during the height of her popularity. Each work of art is hand-curated, printed on cotton based, archival canvas and framed in a wood floater frame.Not eligible for discount.

Susan Hable, Water Spout

Jonathan Adler > Styling

Susan Hable’s artwork is very vibrant and can bring energy to any space. Whether you’re looking for something exciting to brighten up your home or something to liven up your workplace, Susan Hable’s artwork is certain to be a focal point. Works such as her collages can also be excellent for creating a sense of depth. Her work is certain to appeal to those that are interested in natural themes, while also appealing to those that have a love of abstract art. You can take a look through our Susan Hable collection on our site to get a better feel for artwork and her style.Not eligible for discount.

Susan Hable, Mock Orange

Jonathan Adler > Styling

Large Mushrooms Beaded Pillow

Jonathan Adler > Styling

Natural Selections.Shimmering gold beads embroidered on white linen—natural attractions you can cozy up to. The perfect rich hippie must-have for your eccentric and eclectic pillowscape. Pair them with solids and watch them pop, or layer them in a room already wild with décor.

Similar Accessories for Commercial Interiors

Avail Coat Rack

Muuto > Accessories

Designed with Scandinavian materiality at its heart, the Avail Coat Rack brings the ideas of simplicity and functionality into the modern home. The design features 2 metal hooks that can be rearranged forever while also bringing hints of color to the form, allowing for the Avail Coat Rack to evolve as time passes while holding smaller objects on its minute plateau.

Jellies coat hangers (2 pieces)

Kartell > Accessories

The Jellies coat hangers draw their inspiration from the tableware collection of the same name designed by Patricia Urquiola for Kartell. This accessory is available in three different sizes, each with its own specific texture.

Karree Cosmetic mirror

Duravit > Accessories

3 times magnifier, 310 mm Design by Duravit

D-Code Spare roll holder

Duravit > Accessories

Design by sieger design

Starck T Glass holder

Duravit > Accessories

Accent colour: White Matt, Glass, Brass, Type of mounting: Wall-mounted, Position toothbrush holder: Right, Left Design by Philippe Starck

Universal Towel rail

Duravit > Accessories

LORO PIANA INTERIORS - Check rectangular wool cushion

Poltrona Frau > Accessories

Luxurious decorative cushions crafted from a blend of wool and cashmere (Altai) and high-quality Merino wool (Zelander® Check), offering both softness and durability. These cushions, part of the Poltrona Frau wears Loro Piana Interiors project, are designed by Poltrona Frau Style & Design Centre and feature classic check patterns. The edges are adorned with border piping and Pelle SC leather matching the fabric, while the back bears a label certifying the authenticity of the Loro Piana Inter...

JOURNEY - Rectangular leather cushion

Poltrona Frau > Accessories

The Journey Decorative Cushion Collection by Poltrona Frau, designed by Giulio Ridolfo in collaboration with Chiara Novello, offers a unique blend of culture and memory, capturing the essence of visited locations through a vibrant 3D-geometric weave. Crafted entirely from Pelle Frau SC leather, these cushions celebrate the Colorsphere® system with three distinct multi-color proposals: Pier 1 for greens, Tannery for natural leather tones, and Gion for shades of violet and dark blue. Notable f...

CLAYTON - Roll leather cushion

Poltrona Frau > Accessories

The Clayton series by Poltrona Frau, designed by Jean-Marie Massaud, offers a blend of traditional craftsmanship and modern aesthetics. This collection includes the Clayton swivel armchair and bench, featuring a cylindrical cushion available in Pelle Frau® leather or fabric. The leather cushion showcases distinctive 3D stitching, creating a tight weave of little diamonds. The sofa architecture is clear and light, with steel blade feet featuring a Ruthenium finish. The backrest and armrest pa...

ANIMA - Standing towel rack

Salvatori > Accessories

The Anima collection by Glenn Pushelberg and George Yabu seamlessly blends the organic essence of clay with the refined elegance of marble, resulting in a series that embodies both sensuousness and spiritual qualities. Each piece is crafted from premium materials to ensure durability and longevity while maintaining its natural beauty. The construction of the Anima collection features meticulous attention to detail, showcasing gentle, sinuous curves that define every design element—from monumental bathtubs to an extensive range of accessories such as trinket boxes, pots, a tissue box, soap dish, valet tray, and small dishes. These pieces are designed with fluidity in mind, allowing for a more organic and less constrained aesthetic compared to traditional stone designs. The Anima collection is available in five distinct marble varieties: Bianco Carrara, Crema d’Orcia, Gris du Marais®, Pietra d'Avola, and Silk Georgette®. Each material offers unique characteristics that contribute to the overall design appeal of these pieces. The choice of materials not only enhances their aesthetic value but also ensures they can be seamlessly integrated into various interior settings. For those who wish to maintain the pristine condition of their Anima collection, proper care is essential. Regular cleaning with a mild soap and water solution followed by drying thoroughly will help preserve the natural beauty of these pieces. Avoid using harsh chemicals or abrasive materials that could damage the surface finish. Additionally, storing these items in a dry area when not in use can prevent any potential damage from moisture. The Anima collection is designed to complement both contemporary and traditional interiors, making it suitable for a wide range of applications including bathrooms, living rooms, bedrooms, and even as decorative elements within office spaces. Whether you're looking to enhance the aesthetic appeal of your home or workspace, the Anima collection offers an elegant solution that seamlessly integrates with existing decor. In summary, the Anima collection by Glenn Pushelberg and George Yabu is a testament to the harmonious blend of nature's raw beauty and sophisticated design elements. Each piece in this collection stands as a unique expression of form and function, designed to be cherished for generations to come.

QUADRO - Rectangular wall-mounted mirror

Salvatori > Accessories

The Quadro mirror by Salvatori is distinguished by its burnished brass frame, which extends to 7.5 cm in depth. This substantial feature not only elevates the aesthetic appeal of any space but also offers a practical solution for bathroom environments where it can serve as a handy ledge for storing small items or accessories. Available in three distinct sizes, the Quadro mirror is versatile enough to be hung both horizontally and vertically, making it suitable for various room configurations. Designed with modern elegance in mind, the Quadro mirror features clean lines and a minimalist style that seamlessly blends into contemporary interiors. Its burnished brass frame adds a touch of sophistication while its sleek design ensures minimal visual impact on the surrounding decor. The reflective surface is crafted to provide high-quality illumination, enhancing any space's ambiance. The Quadro mirror is ideal for both residential and commercial applications. In homes, it can be installed in bathrooms or as an accent piece in living rooms, bedrooms, or entryways. Commercially, its versatility makes it a popular choice for hotel lobbies, office spaces, or retail environments where it serves not only as a functional accessory but also adds a touch of style. To maintain the Quadro mirror's pristine condition and longevity, proper care is essential. Regular cleaning with a soft cloth dampened in lukewarm water can help remove dust and fingerprints without scratching the reflective surface. Avoid using harsh chemicals or abrasive materials that could damage the burnished brass frame over time. For deeper cleaning, consider using a mild glass cleaner specifically designed for mirrors. The Quadro mirror is an excellent choice for those seeking to add both style and functionality to their space. Its burnished brass frame not only enhances visual appeal but also provides practical benefits in bathroom settings. Whether hung horizontally or vertically, the Quadro mirror can be seamlessly integrated into various room designs, making it a versatile addition that complements modern interiors beautifully.

YOUNG - 7655 - Countertop shaving mirror

Fantini Rubinetti > Accessories

Discover a sleek and functional magnifying mirror with this stylish free-standing design. Crafted from high-quality materials, the mirror features a diameter of 20 cm and is available in three distinct finishes: Chrome, Matt Black, and Brushed Stainless Steel. This versatile piece offers both aesthetic appeal and practical utility. The construction is robust yet lightweight, ensuring durability while maintaining ease of use. The design incorporates elegant style with its contemporary look that complements various interior aesthetics. Features such as a magnifying glass enhance the mirror's functionality for tasks requiring detailed observation or precision work. This magnifying mirror is ideal for applications in bathrooms, dressing rooms, and even home offices where precise measurements are necessary. Its compact size allows it to be easily integrated into any space without compromising on style or utility. For optimal performance and longevity, follow these care tips: avoid direct exposure to extreme temperatures; clean with a soft cloth and mild soap solution when needed to maintain its pristine appearance. Regular maintenance will help preserve the finish of your magnifying mirror for years to come. The Fantini Rubinetti brand offers further information on this product, providing insights into its design philosophy and construction techniques that contribute to its quality and functionality.